E2A-M18LS08-M1-C3 Equivalent & Substitute Parts

Part Overview

The E2A-M18LS08-M1-C3 is an inductive proximity sensor manufactured by Omron Automation and Safety. This cylindrical M18 threaded sensor is designed for non-contact detection applications with an 8mm sensing distance. The product is classified as Obsolete, necessitating identification of active equivalent models to maintain system continuity and ensure long-term component availability for new designs and field replacements.

Substiute Parts

E2A-M18LS08-M1-C3

Omron Automation and SafetyIn Stock: 896E2A-M18LS08-M1-C3 Datasheet

Current PartRFQ

E2E-X8C3L18-M1

Omron Automation and SafetyIn Stock: 1102E2E-X8C3L18-M1 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The E2E-X8C3L18-M1 qualifies as a direct substitute based on the following critical parameters that determine functional compatibility:

Matching Parameters:

• Sensor Type: Inductive (identical detection principle)
• Sensing Distance: 0.315" (8mm) (identical detection range)
• Output Type: NPN-NC/NO, 3-Wire (identical signal interface)
• Response Frequency: 500Hz (identical switching speed)
• Shielding: Shielded (identical electromagnetic immunity)
• Material - Body: Nickel-Plated Brass (identical environmental resistance)
• Termination Style: Connector (identical connection method)
• Ingress Protection: IP67, IP69K (identical environmental sealing)
• Indicator: LED (identical status indication)
• Package / Case: Cylinder, Threaded - M18 (identical mechanical form factor)
• RoHS Status: RoHS Compliant (identical regulatory compliance)
• Moisture Sensitivity Level (MSL): 1 (Unlimited) (identical moisture handling)

Operational Differences: The E2E-X8C3L18-M1 operates within a narrower supply voltage range (10V ~ 30V versus 10V ~ 32V) and a narrower operating temperature range (-25°C ~ 70°C versus -40°C ~ 70°C). These differences are acceptable for most industrial applications where the substitute operates within the specified limits.

Parameter Comparison

Engineering Selection Recommendations

The E2E-X8C3L18-M1 is the designated substitute for the obsolete E2A-M18LS08-M1-C3. Both components are manufactured by Omron Automation and Safety and maintain identical RoHS Compliance status. The E2E-X8C3L18-M1 is an active product with current manufacturing support, ensuring availability for procurement and field service applications.

Selection of the E2E-X8C3L18-M1 is appropriate when the application operates within the specified voltage range of 10V to 30V and the operating environment remains within -25°C to 70°C. For applications requiring the extended voltage range (up to 32V) or extended low-temperature operation (below -25°C), compatibility must be confirmed against specific system requirements.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X8C3L18-M1 be used as a direct replacement for the E2A-M18LS08-M1-C3?

A: Yes. Both sensors share identical sensing distance, output type, response frequency, shielding, body material, termination style, ingress protection rating, and mechanical form factor. The E2E-X8C3L18-M1 is an active product with current manufacturing support.

Q: What are the differences between these two models?

A: The E2E-X8C3L18-M1 operates within a narrower supply voltage range (10V ~ 30V versus 10V ~ 32V) and a narrower operating temperature range (-25°C ~ 70°C versus -40°C ~ 70°C). Confirm these specifications align with your application requirements before selection.

Q: Are both sensors mechanically compatible with M18 threaded installations?

A: Yes. Both sensors use the Cylinder, Threaded - M18 package format and are mechanically interchangeable in M18 mounting applications.

Q: Do both sensors provide the same connector termination?

A: Yes. Both sensors use connector termination style and maintain identical 3-Wire NPN-NC/NO output configuration.

Q: Are there any regulatory compliance differences?

A: No. Both sensors maintain RoHS Compliance status and identical Moisture Sensitivity Level (MSL) rating of 1 (Unlimited).