E2A-M18LS08-M1-C2 Equivalent & Substitute Parts

Part Overview

The E2A-M18LS08-M1-C2 is an inductive proximity sensor manufactured by Omron Automation and Safety, designed for industrial automation applications requiring non-contact object detection. This sensor operates with an 8mm sensing distance in a compact M18 cylindrical threaded housing and delivers NPN-NC output through a 3-wire connector interface.

The E2A-M18LS08-M1-C2 has reached obsolete product status. Identifying equivalent substitute parts ensures continued system availability and supply chain continuity for maintenance, repair, and new installations requiring compatible inductive sensing solutions.

Substiute Parts

E2A-M18LS08-M1-C2

Omron Automation and SafetyIn Stock: 960E2A-M18LS08-M1-C2 Datasheet

Current PartRFQ

E2E-X8C2L18-M1

Omron Automation and SafetyIn Stock: 1099E2E-X8C2L18-M1 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the E2A-M18LS08-M1-C2 is determined by strict alignment across the following critical parameters:

Mandatory Matching Parameters:

• Sensor Type: Inductive
• Sensing Distance: 0.315" (8mm)
• Output Type: NPN-NC, 3-Wire
• Response Frequency: 500Hz
• Shielding: Shielded
• Material - Body: Nickel-Plated Brass
• Termination Style: Connector
• Ingress Protection: IP67, IP69K
• Indicator: LED
• Package / Case: Cylinder, Threaded - M18

Allowable Parameter Variations:

• Voltage - Supply: Substitute must support the full 10V ~ 32V range or a subset thereof
• Operating Temperature: Substitute may extend the upper or lower temperature limits
• Product Status: Active status preferred for ongoing availability

The E2E-X8C2L18-M1 meets all mandatory matching parameters and qualifies as a direct substitute for the obsolete E2A-M18LS08-M1-C2.

Parameter Comparison

Engineering Selection Recommendations

The E2E-X8C2L18-M1 is the qualified substitute for the obsolete E2A-M18LS08-M1-C2. Both sensors are manufactured by Omron Automation and Safety and maintain identical electrical and mechanical specifications across all critical parameters.

The E2E-X8C2L18-M1 carries Active product status, ensuring long-term availability and supply chain support. Both parts maintain RoHS Compliance certification, meeting environmental and regulatory requirements for industrial applications.

The E2E-X8C2L18-M1 operates within a reduced voltage supply range of 10V ~ 30V compared to the main part's 10V ~ 32V specification. Systems operating at 31V or 32V require voltage verification before substitution. The substitute part extends the upper operating temperature limit to 85°C, providing enhanced thermal performance in high-temperature environments.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X8C2L18-M1 directly replace the E2A-M18LS08-M1-C2 in existing installations?

A: Yes. Both sensors share identical sensing distance (8mm), output type (NPN-NC, 3-Wire), response frequency (500Hz), shielding, body material, termination style, ingress protection rating, and M18 cylindrical threaded housing. Mechanical and electrical compatibility is confirmed across all critical parameters.

Q: What is the voltage supply difference between these two sensors?

A: The E2A-M18LS08-M1-C2 operates at 10V ~ 32V, while the E2E-X8C2L18-M1 operates at 10V ~ 30V. If your system supplies 31V or 32V, verify that the substitute part's reduced range is compatible with your application before installation.

Q: Does the E2E-X8C2L18-M1 maintain the same ingress protection rating?

A: Yes. Both sensors provide IP67 and IP69K ingress protection ratings, ensuring equivalent sealing performance in wet, dusty, and high-pressure wash environments.

Q: What is the difference in operating temperature range?

A: The E2A-M18LS08-M1-C2 operates from -40°C to 70°C, while the E2E-X8C2L18-M1 extends the upper limit to 85°C. The substitute part offers improved thermal performance for high-temperature applications while maintaining the same lower temperature limit.

Q: Are both sensors RoHS compliant?

A: Yes. Both the E2A-M18LS08-M1-C2 and E2E-X8C2L18-M1 are RoHS Compliant, meeting environmental and regulatory standards for industrial component manufacturing.

Q: Why is the E2A-M18LS08-M1-C2 marked as obsolete?

A: The E2A-M18LS08-M1-C2 has reached end-of-life status. The E2E-X8C2L18-M1 represents the current-generation equivalent from Omron's E2E NEXT series, offering the same functional specifications with active product support and ongoing availability.