Equivalent & Substitute Parts for E2A-M12LS04-WP-C2 5M

Part Overview

The E2A-M12LS04-WP-C2 5M is an inductive proximity sensor manufactured by Omron Automation and Safety. This cylindrical M12-threaded sensor is designed for non-contact detection applications with a 4mm sensing distance and NPN-NC output configuration. The product is classified as obsolete, making identification of functionally equivalent alternatives necessary for ongoing system maintenance and new design implementations.

Substiute Parts

E2A-M12LS04-WP-C2 5M

Omron Automation and SafetyIn Stock: 826E2A-M12LS04-WP-C2 5M Datasheet

Current PartRFQ

E2E-X4C2L12 5M

Omron Automation and SafetyIn Stock: 1230E2E-X4C2L12 5M Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The E2E-X4C2L12 5M qualifies as a direct substitute based on the following critical parameters:

• Sensor Type: Both are inductive proximity sensors
• Sensing Distance: Identical at 0.157" (4mm)
• Output Type: Both feature NPN-NC, 3-Wire configuration
• Response Frequency: Both operate at 1kHz
• Shielding: Both are shielded designs
• Material - Body: Both use Nickel-Plated Brass construction
• Termination Style: Both employ Cable Leads
• Package / Case: Both use Cylinder, Threaded - M12 form factor
• Ingress Protection: Both meet IP67 and IP69K ratings
• RoHS Status: Both are RoHS Compliant

The E2E-X4C2L12 5M represents an active product from Omron's E2E NEXT series, providing functional continuity for applications currently using the obsolete E2A-M12LS04-WP-C2 5M.

Parameter Comparison

Engineering Selection Recommendations

The E2E-X4C2L12 5M is the appropriate substitute for the obsolete E2A-M12LS04-WP-C2 5M. Both components are manufactured by Omron and maintain identical electrical and mechanical specifications across all critical parameters. The substitute part is currently in active production status, ensuring long-term availability and supply chain continuity.

The E2E-X4C2L12 5M offers an extended operating temperature range (-40°C to 85°C versus -40°C to 70°C) and a marginally reduced maximum supply voltage (30V versus 32V). These variations remain within acceptable tolerances for standard industrial applications and do not compromise functional equivalence.

Both components carry RoHS Compliance certification and identical ECCN and HTSUS classifications, supporting regulatory and procurement requirements.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X4C2L12 5M directly replace the E2A-M12LS04-WP-C2 5M in existing installations?

A: Yes. Both sensors share identical sensing distance, output type, response frequency, shielding, body material, termination style, package form factor, and ingress protection ratings. The M12 threaded cylinder housing ensures mechanical compatibility.

Q: What are the differences between these two models?

A: The E2E-X4C2L12 5M operates at a maximum supply voltage of 30V compared to 32V for the E2A-M12LS04-WP-C2 5M, and supports an extended operating temperature range to 85°C versus 70°C. The E2E-X4C2L12 5M is an active product, while the E2A-M12LS04-WP-C2 5M is obsolete.

Q: Are there any cable or connector considerations for substitution?

A: Both models use Cable Leads termination. Existing cable assemblies and connectors compatible with the E2A-M12LS04-WP-C2 5M will function with the E2E-X4C2L12 5M without modification.

Q: Do both sensors meet the same environmental protection standards?

A: Yes. Both the E2A-M12LS04-WP-C2 5M and E2E-X4C2L12 5M are rated for IP67 and IP69K ingress protection, suitable for washdown and high-pressure spray environments.

Q: What is the significance of the product status difference?

A: The E2A-M12LS04-WP-C2 5M is classified as obsolete, indicating discontinued production. The E2E-X4C2L12 5M is an active product with ongoing manufacturing and supply availability, making it the recommended choice for new designs and long-term system support.