E2A-M12LS04-WP-C1 2M Equivalent & Substitute Parts

Part Overview

The E2A-M12LS04-WP-C1 2M is an inductive proximity sensor manufactured by Omron Automation and Safety, designed for non-contact object detection in industrial applications. This sensor operates with a 4mm sensing distance and provides NPN-NO output through a 3-wire configuration with M12 threaded cylindrical housing. The product is currently classified as obsolete, necessitating identification of functionally equivalent alternatives to maintain system continuity and support ongoing maintenance requirements.

Substiute Parts

E2A-M12LS04-WP-C1 2M

Omron Automation and SafetyIn Stock: 843E2A-M12LS04-WP-C1 2M Datasheet

Current PartRFQ

E2E-X4C1L12 2M

Omron Automation and SafetyIn Stock: 993E2E-X4C1L12 2M Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the E2A-M12LS04-WP-C1 2M is determined by strict alignment of the following critical parameters:

• Sensor Type: Inductive proximity sensor
• Sensing Distance: 0.157" (4mm)
• Output Configuration: NPN-NO, 3-Wire
• Response Frequency: 1kHz
• Shielding: Shielded
• Body Material: Nickel-Plated Brass
• Termination: Cable Leads
• Housing: Cylinder, Threaded - M12
• Ingress Protection: IP67, IP69K
• Indicator: LED

The E2E-X4C1L12 2M qualifies as a direct substitute based on matching all critical functional and mechanical parameters. Voltage supply range and operating temperature range represent acceptable operational boundaries within typical industrial application requirements.

Parameter Comparison

*Compatible: E2E-X4C1L12 2M operates within a narrower voltage range (10V ~ 30V vs. 10V ~ 32V) and narrower temperature range (-25°C ~ 70°C vs. -40°C ~ 70°C). Substitution is valid for applications operating within these narrower boundaries.

Engineering Selection Recommendations

The E2E-X4C1L12 2M from the E2E NEXT series is the qualified substitute for the obsolete E2A-M12LS04-WP-C1 2M. Both components are RoHS Compliant and manufactured by Omron Automation and Safety, ensuring regulatory alignment and supply chain continuity.

The E2E-X4C1L12 2M carries Active product status, providing long-term availability and ongoing manufacturer support. Selection of this substitute is appropriate for applications where the operating voltage remains within 10V to 30V and ambient temperature does not fall below -25°C.

For applications requiring the full -40°C lower temperature limit of the original part, alternative solutions outside the provided substitute list must be evaluated.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X4C1L12 2M directly replace the E2A-M12LS04-WP-C1 2M in existing installations?

A: Yes, provided the application operates within the voltage range of 10V to 30V and the ambient temperature range of -25°C to 70°C. The E2E-X4C1L12 2M matches all critical functional parameters including sensing distance, output type, response frequency, shielding, housing, and ingress protection rating.

Q: What are the key differences between these two sensors?

A: The primary differences are the product status (obsolete vs. active) and operational boundaries. The E2E-X4C1L12 2M has a narrower voltage supply range (30V maximum vs. 32V maximum) and a higher minimum operating temperature (-25°C vs. -40°C).

Q: Are both sensors mechanically compatible with M12 threaded installations?

A: Yes. Both sensors feature identical M12 threaded cylindrical housing with cable lead termination, ensuring mechanical and electrical compatibility in M12 connector applications.

Q: What is the significance of the "2M" designation in both part numbers?

A: The "2M" designation indicates a 2-meter cable lead length for both the E2A-M12LS04-WP-C1 2M and E2E-X4C1L12 2M.

Q: Why is the original E2A-M12LS04-WP-C1 2M classified as obsolete?

A: Product obsolescence reflects manufacturer discontinuation. The E2E NEXT series (E2E-X4C1L12 2M) represents the current generation replacement, offering equivalent functionality with active production and support status.