E2A-M12LS04-M5-C1 Equivalent & Substitute Parts

Part Overview

The E2A-M12LS04-M5-C1 is an inductive proximity sensor manufactured by Omron Automation and Safety. This cylindrical M12-threaded sensor is designed for non-contact detection applications with a 4mm sensing distance. The product is classified as obsolete, making identification of equivalent and substitute parts essential for system maintenance, component replacement, and procurement planning.

Substiute Parts

E2A-M12LS04-M5-C1

Omron Automation and SafetyIn Stock: 797E2A-M12LS04-M5-C1 Datasheet

Current PartRFQ

E2A-M12LS04-M1-C1

Omron Automation and SafetyIn Stock: 813E2A-M12LS04-M1-C1 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the E2A-M12LS04-M5-C1 is determined by strict equivalence across the following critical parameters:

• Sensor Type: Inductive proximity sensor
• Sensing Distance: 0.157" (4mm)
• Output Configuration: NPN-NO, 3-Wire
• Response Frequency: 1kHz
• Shielding: Shielded
• Supply Voltage Range: 10V ~ 32V
• Package / Case: Cylinder, Threaded - M12
• Termination Style: Connector
• Operating Temperature Range: -40°C ~ 70°C
• Ingress Protection: IP67 minimum

The substitute part E2A-M12LS04-M1-C1 maintains full electrical and mechanical compatibility across all specified parameters, differing only in packaging format and minor certifications.

Parameter Comparison

Engineering Selection Recommendations

The E2A-M12LS04-M1-C1 is a direct functional equivalent to the E2A-M12LS04-M5-C1. Both parts are classified as obsolete products from the same manufacturer and series. The substitute part provides identical electrical performance and mechanical form factor.

The E2A-M12LS04-M1-C1 offers enhanced ingress protection certification (IP67 and IP69K) compared to the main part (IP67 only) and carries RoHS Compliance certification. These attributes make it suitable for applications requiring higher environmental protection standards or regulatory compliance.

Selection between these parts should be based on packaging requirements (connector versus bulk) and compliance certifications needed for the target application.

Frequently Asked Questions (FAQ)

Q: Can E2A-M12LS04-M1-C1 be used as a direct replacement for E2A-M12LS04-M5-C1?

A: Yes. Both parts share identical electrical specifications (NPN-NO 3-Wire output, 1kHz response frequency, 10V–32V supply), mechanical form factor (M12 threaded cylinder), and sensing distance (4mm). The primary difference is packaging format and enhanced certifications on the substitute part.

Q: What is the difference between the packaging formats?

A: E2A-M12LS04-M5-C1 is supplied with connector termination, while E2A-M12LS04-M1-C1 is supplied in bulk packaging. Both use connector termination style for field installation.

Q: Does the substitute part have better environmental protection?

A: The E2A-M12LS04-M1-C1 is rated for both IP67 and IP69K ingress protection, whereas the main part is rated for IP67 only. This provides additional protection in high-pressure wash or submersion applications.

Q: Are both parts RoHS compliant?

A: The E2A-M12LS04-M1-C1 is explicitly marked as RoHS Compliant. RoHS status for the E2A-M12LS04-M5-C1 is not specified in available documentation.

Q: Can these parts be used interchangeably in existing installations?

A: Yes, provided the M12 threaded mounting interface and connector termination are compatible with the existing installation. Electrical performance and sensing characteristics are identical.