E2A-M12LS04-M1-C1 Equivalent & Substitute Parts

Part Overview

The E2A-M12LS04-M1-C1 is an inductive proximity sensor manufactured by Omron Automation and Safety, designed for non-contact object detection in industrial applications. This sensor operates with a 4mm sensing distance and provides NPN-NO output through a 3-wire M12 connector interface. The product is classified as obsolete, necessitating identification of active equivalent models to maintain system continuity and ensure long-term component availability for new installations and maintenance applications.

Substiute Parts

E2A-M12LS04-M1-C1

Omron Automation and SafetyIn Stock: 813E2A-M12LS04-M1-C1 Datasheet

Current PartRFQ

E2E-X4C1L12-M1

Omron Automation and SafetyIn Stock: 964E2E-X4C1L12-M1 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the E2A-M12LS04-M1-C1 is determined by strict equivalence across the following critical parameters:

Functional Parameters (Must Match):

• Sensor Type: Inductive
• Sensing Distance: 0.157" (4mm)
• Output Type: NPN-NO, 3-Wire
• Response Frequency: 1kHz
• Package / Case: Cylinder, Threaded - M12
• Termination Style: Connector
• Shielding: Shielded
• Ingress Protection Rating: IP67, IP69K

Electrical Parameters (Must Be Compatible):

• Voltage Supply Range: Substitute must operate within or encompass the original 10V ~ 32V range
• Operating Temperature Range: Substitute must support the original -40°C ~ 70°C range or a subset thereof

Material & Construction (Must Match):

• Material - Body: Nickel-Plated Brass
• Indicator: LED

The E2E-X4C1L12-M1 meets all critical functional and electrical parameters, with the exception of a reduced upper voltage limit (10V ~ 30V versus 10V ~ 32V) and a narrower lower operating temperature limit (-25°C versus -40°C). These differences represent acceptable trade-offs for applications operating within the E2E-X4C1L12-M1 specifications.

Parameter Comparison

Engineering Selection Recommendations

The E2E-X4C1L12-M1 is the designated equivalent for the obsolete E2A-M12LS04-M1-C1. Both components are manufactured by Omron Automation and Safety and maintain RoHS compliance. The E2E-X4C1L12-M1 is currently in active production status, ensuring availability for procurement and future supply chain continuity.

Selection of the E2E-X4C1L12-M1 is appropriate for applications where the operating environment remains within the specified voltage range of 10V ~ 30V and operating temperature range of -25°C ~ 70°C. Applications requiring operation below -25°C or above 30V supply voltage must retain the original E2A-M12LS04-M1-C1 or identify alternative solutions.

Frequently Asked Questions (FAQ)

Q: Can the E2E-X4C1L12-M1 directly replace the E2A-M12LS04-M1-C1 in all applications?

A: Direct replacement is valid for applications operating within the E2E-X4C1L12-M1 specifications: 10V ~ 30V supply voltage and -25°C ~ 70°C operating temperature. Applications requiring extended voltage range (up to 32V) or extended low-temperature operation (below -25°C) require evaluation of alternative components or retention of original stock.

Q: What are the key differences between these two models?

A: The primary differences are product status and operational range limits. The E2A-M12LS04-M1-C1 supports 10V ~ 32V and -40°C ~ 70°C, while the E2E-X4C1L12-M1 supports 10V ~ 30V and -25°C ~ 70°C. All functional parameters, including sensing distance, output type, response frequency, and M12 connector interface, are identical.

Q: Are the M12 connectors physically compatible?

A: Both sensors use M12 threaded cylinder connectors with identical mechanical specifications. Physical installation and connector compatibility are assured.

Q: What is the significance of the product status change from Obsolete to Active?

A: The transition from Obsolete to Active status indicates that the E2E-X4C1L12-M1 is in current production and subject to standard lead time and availability guarantees. The E2A-M12LS04-M1-C1, being obsolete, may have limited remaining inventory and no guaranteed future availability.

Q: Are there any differences in packaging or documentation?

A: The E2A-M12LS04-M1-C1 is supplied in Bulk packaging, while the E2E-X4C1L12-M1 is supplied in Box packaging. Both components carry identical RoHS compliance and regulatory certifications.