Omron E2A-M08LS02-M1-C1 Inductive Proximity Sensor - Equivalent & Substitute Parts

Part Overview

The Omron E2A-M08LS02-M1-C1 is a cylindrical inductive proximity sensor with a 2mm sensing distance, designed for industrial automation applications requiring non-contact object detection. This sensor operates as an NPN normally open switch with a 3-wire connector interface and is housed in a nickel-plated brass M8 threaded cylinder package.

The E2A-M08LS02-M1-C1 is classified as obsolete. Locating equivalent substitute parts is necessary to maintain system functionality and ensure continued availability for replacement or new installations where this model is specified.

Key Parameters

Parameter	Value
Sensor Type	Inductive
Sensing Distance	0.079" (2mm)
Output Type	NPN-NO, 3-Wire
Response Frequency	1.5kHz
Voltage Supply Range	10V ~ 32V
Operating Temperature Range	-40°C ~ 85°C
Ingress Protection Rating	IP67, IP69K
Package / Case	Cylinder, Threaded - M8
Termination Style	Connector
Shielding	Shielded
Indicator	LED

Substitute Part Grouping Explanation

Substitute parts for the E2A-M08LS02-M1-C1 are identified based on electrical and mechanical compatibility across the following critical parameters:

Sensor type: Inductive
Sensing distance: 0.079" (2mm)
Output configuration: NPN-NO, 3-Wire
Response frequency: 1.5kHz
Supply voltage range: Minimum 10V to 32V
Package: M8 threaded cylinder with connector termination
Ingress protection: IP67, IP69K
Shielding: Shielded
Indicator: LED

Two substitute parts meet these criteria with allowable variations in body material and operating temperature range.

Parameter Comparison

Parameter	E2A-M08LS02-M1-C1 (Main)	E2A-S08LS02-M1-C1 (Direct Substitute)	E2E-X2C1L8-M1 (Similar Substitute)
Manufacturer	Omron Automation and Safety	Omron Automation and Safety	Omron Automation and Safety
Product Status	Obsolete	Active	Active
Sensor Type	Inductive	Inductive	Inductive
Sensing Distance	0.079" (2mm)	0.079" (2mm)	0.079" (2mm)
Output Type	NPN-NO, 3-Wire	NPN-NO, 3-Wire	NPN-NO, 3-Wire
Response Frequency	1.5kHz	1.5kHz	1.5kHz
Voltage Supply Range	10V ~ 32V	10V ~ 32V	10V ~ 30V
Operating Temperature Range	-40°C ~ 85°C	-40°C ~ 70°C	-25°C ~ 70°C
Ingress Protection	IP67, IP69K	IP67, IP69K	IP67, IP69K
Package / Case	Cylinder, Threaded - M8	Cylinder, Threaded - M8	Cylinder, Threaded - M8
Termination Style	Connector	Connector	Connector
Shielding	Shielded	Shielded	Shielded
Indicator	LED	LED	LED
Material - Body	Nickel-Plated Brass	Stainless Steel	Stainless Steel
RoHS Status	Vendor Undefined	RoHS Compliant	RoHS Compliant

Engineering Selection Recommendations

The E2A-S08LS02-M1-C1 is the primary direct substitute for the obsolete E2A-M08LS02-M1-C1. Both parts share identical electrical specifications, sensing distance, output configuration, and M8 connector interface. The E2A-S08LS02-M1-C1 is currently in active production status with RoHS compliance certification. The body material differs (stainless steel versus nickel-plated brass), which provides superior corrosion resistance in harsh environments. The operating temperature range is reduced to -40°C ~ 70°C; applications requiring operation above 70°C must evaluate this limitation.

The E2E-X2C1L8-M1 represents an alternative from Omron's E2E NEXT series with equivalent electrical and mechanical compatibility. This part is also in active production with RoHS compliance. The supply voltage range is 10V ~ 30V (versus 10V ~ 32V), and the operating temperature range is -25°C ~ 70°C. Applications operating below -25°C or above 70°C require the E2A-S08LS02-M1-C1. The E2E-X2C1L8-M1 offers next-generation sensor technology within the same form factor.

Both substitutes maintain full compatibility with existing M8 connector installations and preserve the 1.5kHz response frequency and IP67/IP69K ingress protection ratings.

Frequently Asked Questions (FAQ)

Q: Can the E2A-S08LS02-M1-C1 directly replace the E2A-M08LS02-M1-C1 in existing installations?

A: Yes. Both sensors share identical electrical specifications, sensing distance, output type, response frequency, and M8 threaded connector interface. The primary difference is body material (stainless steel versus nickel-plated brass) and a reduced upper operating temperature limit of 70°C. Verify that your application does not require operation above 70°C.

Q: What is the difference between the E2A-S08LS02-M1-C1 and E2E-X2C1L8-M1?

A: Both are active Omron inductive proximity sensors with 2mm sensing distance and NPN-NO output. The E2A-S08LS02-M1-C1 supports 10V ~ 32V supply voltage and -40°C ~ 70°C operating temperature. The E2E-X2C1L8-M1 supports 10V ~ 30V supply voltage and -25°C ~ 70°C operating temperature. The E2E-X2C1L8-M1 represents Omron's next-generation E2E NEXT series technology.

Q: Are there any compatibility concerns with M8 connector interfaces?

A: No. All three sensors use identical M8 threaded cylinder packages with connector termination. Existing M8 connector installations are fully compatible with both substitute parts.

Q: Which substitute should I select for applications requiring operation below -25°C?

A: The E2A-S08LS02-M1-C1 supports operation down to -40°C and is the appropriate choice for low-temperature applications. The E2E-X2C1L8-M1 is limited to -25°C minimum.

Q: Are the substitute parts RoHS compliant?

A: Yes. Both the E2A-S08LS02-M1-C1 and E2E-X2C1L8-M1 are RoHS compliant. The original E2A-M08LS02-M1-C1 has vendor-undefined RoHS status.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message