E2A-M08LS02-M1-B2 Equivalent & Substitute Parts

Part Overview

The E2A-M08LS02-M1-B2 is a proximity sensor manufactured by Omron Automation and Safety, classified as a Sensors, Transducers component. This part is currently listed with Obsolete product status. Due to its obsolescence, identifying functionally equivalent substitute components is essential for system continuity, maintenance, and new design implementations where this sensor type is required.

Substiute Parts

E2A-M08LS02-M1-B2

Omron Automation and SafetyIn Stock: 758E2A-M08LS02-M1-B2 Datasheet

Current PartRFQ

E2E-X2B2L8-M1

Omron Automation and SafetyIn Stock: 1105E2E-X2B2L8-M1 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The E2E-X2B2L8-M1 is identified as a substitute for the E2A-M08LS02-M1-B2 based on the following substitution criteria:

Functional Category Match: Both components are proximity sensors within the Omron Automation and Safety product portfolio, classified as Sensors, Transducers.

Manufacturer Consistency: Both parts are manufactured by Omron Automation and Safety, ensuring design philosophy and quality standards alignment.

Connector Interface: Both sensors utilize M8 connector termination style, enabling mechanical and electrical compatibility in existing installations.

Operational Environment: The substitute part operates within industrial sensor specifications including IP67 and IP69K ingress protection ratings, suitable for the application domain of the original component.

Active Product Status: The E2E-X2B2L8-M1 maintains Active product status, ensuring ongoing availability, technical support, and supply chain continuity.

Parameter Comparison

Engineering Selection Recommendations

Product Status Consideration: The E2A-M08LS02-M1-B2 is classified as Obsolete, indicating discontinued manufacturing and limited long-term availability. The E2E-X2B2L8-M1 maintains Active product status, providing assured supply and ongoing manufacturer support.

Compliance and Certification: The E2E-X2B2L8-M1 is RoHS Compliant, meeting current environmental and regulatory requirements for electronic components in industrial applications. This compliance status supports integration into modern systems and procurement frameworks.

Manufacturer Support: Both components originate from Omron Automation and Safety. Selection of the E2E-X2B2L8-M1 maintains vendor consistency while transitioning to an actively supported product line.

Inventory Availability: The E2E-X2B2L8-M1 is available with 1069 pieces in new original stock, ensuring immediate procurement capability for replacement and new installations.

Frequently Asked Questions (FAQ)

Q: Why is the E2A-M08LS02-M1-B2 listed as Obsolete?

A: Obsolete classification indicates that Omron Automation and Safety has discontinued manufacturing of this component. This status necessitates identification of equivalent alternatives for ongoing system support and new applications.

Q: What is the primary substitution criterion between these two sensors?

A: Both components are proximity sensors manufactured by Omron Automation and Safety with M8 connector interfaces, enabling functional and mechanical compatibility in sensor applications.

Q: Is the E2E-X2B2L8-M1 a direct replacement for the E2A-M08LS02-M1-B2?

A: The E2E-X2B2L8-M1 is identified as a substitute based on shared manufacturer origin, sensor category classification, and M8 connector termination. Detailed application requirements should be evaluated against the specified parameters of the E2E-X2B2L8-M1.

Q: What are the key technical specifications of the substitute part?

A: The E2E-X2B2L8-M1 is an inductive proximity sensor with 2mm sensing distance, PNP-NC output configuration, 1.5kHz response frequency, shielded design, stainless steel body, 10V to 30V supply voltage range, -25°C to 70°C operating temperature, IP67 and IP69K ingress protection, and LED indicator.

Q: Does the substitute part meet current environmental standards?

A: Yes, the E2E-X2B2L8-M1 is RoHS Compliant, meeting current environmental and regulatory requirements for electronic component manufacturing and use.

Q: What is the connector type for the substitute sensor?

A: The E2E-X2B2L8-M1 utilizes an M8 connector termination style, consistent with the original component's interface requirements.

Q: Is the substitute part actively manufactured?

A: Yes, the E2E-X2B2L8-M1 maintains Active product status, ensuring ongoing manufacturing, availability, and manufacturer technical support.