E201SYCGE Toggle Switch DPDT Equivalent & Substitute Parts

Part Overview

The E201SYCGE is an active-status toggle switch manufactured by C&K, configured as a Double Pole Double Throw (DPDT) panel mount switch with On-On functionality. This switch is designed for applications requiring 7.5A at 125V AC or 28V DC with IP57 ingress protection. Substitute parts are identified when equivalent electrical ratings, mechanical compatibility, and circuit configuration align with the main part's specifications, enabling direct replacement in compatible applications.

Substiute Parts

E201SYCGE

C&KIn Stock: 980E201SYCGE Datasheet

Current PartRFQ

100DP1T1B1M2QEH

E-SwitchIn Stock: 8034100DP1T1B1M2QEH Datasheet

SimilarRFQ

100DP1T6B15M2RE

E-SwitchIn Stock: 891100DP1T6B15M2RE Datasheet

SimilarRFQ

2-1825138-4

TE Connectivity ALCOSWITCH SwitchesIn Stock: 18262-1825138-4 Datasheet

SimilarRFQ

2M1-DP1-T1-B1-M2QE

Carling TechnologiesIn Stock: 17322M1-DP1-T1-B1-M2QE Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the E201SYCGE are grouped based on the following critical parameters that determine functional equivalence:

Primary Compatibility Criteria:

• Circuit configuration (DPDT required)
• Switch function (On-On required)
• Mounting type (Panel Mount required)
• Panel cutout dimensions (Circular - 6.35mm Dia required)
• Bushing thread (1/4-40 required)
• Termination style (PC Pin required)
• Operating temperature range (-30°C ~ 85°C required)

Electrical Compatibility Criteria:

• Current rating must meet or exceed application requirements
• Voltage ratings (AC and DC) must meet or exceed application requirements

Compliance Criteria:

• RoHS3 compliance status
• Product status (Active preferred)

The substitute parts listed below maintain these core parameters while varying in current capacity, voltage ratings, actuator specifications, and ingress protection ratings. Selection depends on the specific electrical demands of the target application.

Parameter Comparison

Engineering Selection Recommendations

100DP1T1B1M2QEH (E-Switch): This substitute maintains DPDT On-On configuration with 5A current rating at 120V AC and 28V DC. Electrical ratings are lower than the main part; selection is appropriate for applications requiring 5A or less. All mechanical parameters align with the E201SYCGE. RoHS3 compliance and active product status are confirmed.

100DP1T6B15M2RE (E-Switch): This substitute is suitable only for low-power applications requiring 0.4VA at 20V AC/DC maximum. Current and voltage ratings are significantly reduced compared to the E201SYCGE. Mechanical compatibility is maintained. RoHS3 compliance is confirmed.

2-1825138-4 (TE Connectivity ALCOSWITCH): This substitute is rated for 0.4VA at 20V AC/DC, limiting its use to low-power applications. Electrical life is reduced to 6,000 cycles compared to 40,000 cycles in the main part. Mechanical parameters align with the E201SYCGE. RoHS3 compliance is confirmed.

2M1-DP1-T1-B1-M2QE (Carling Technologies): This substitute provides 5A at 125V AC and 28V DC, matching the main part's voltage ratings. Current rating is lower at 5A versus 7.5A. Electrical life is extended to 50,000 cycles. Ingress protection is upgraded to IP67. All mechanical parameters align with the E201SYCGE. RoHS3 compliance is confirmed.

Selection among substitutes depends on application-specific current and voltage requirements. The Carling Technologies part offers enhanced electrical life and ingress protection at reduced current capacity. E-Switch parts provide lower-power alternatives with maintained mechanical compatibility.

Frequently Asked Questions (FAQ)

Q: Can the 100DP1T1B1M2QEH replace the E201SYCGE in all applications?

A: No. The 100DP1T1B1M2QEH is rated for 5A maximum, while the E201SYCGE is rated for 7.5A. Substitution is valid only for applications requiring 5A or less at 120V AC or 28V DC.

Q: What is the primary difference between the E-Switch and Carling Technologies substitutes?

A: The Carling Technologies 2M1-DP1-T1-B1-M2QE maintains the 5A current rating at 125V AC, matching the main part's voltage specification more closely. It also provides IP67 ingress protection versus the main part's IP57 rating. The E-Switch 100DP1T1B1M2QEH is rated for 120V AC instead of 125V AC.

Q: Are the low-power substitutes (100DP1T6B15M2RE and 2-1825138-4) suitable for general replacement?

A: No. These parts are rated for 0.4VA at 20V maximum and are suitable only for low-power control circuits. They are not appropriate for applications requiring the E201SYCGE's 7.5A capacity.

Q: Do all substitute parts maintain the same panel cutout and bushing specifications?

A: Yes. All substitute parts listed maintain the circular 6.35mm diameter panel cutout and 1/4-40 bushing thread, ensuring mechanical compatibility with existing panel installations.

Q: What compliance certifications are common across all parts?

A: All parts listed are RoHS3 compliant and maintain active product status. Operating temperature ranges are identical at -30°C ~ 85°C across all parts.

Q: How does electrical life differ among the substitutes?

A: The main part and most E-Switch substitutes are rated for 40,000 cycles. The TE Connectivity part is rated for 6,000 cycles. The Carling Technologies part is rated for 50,000 cycles, providing extended operational life.