E201MD9AGE Toggle Switch DPDT Equivalent & Substitute Parts

Part Overview

The E201MD9AGE is an active production toggle switch manufactured by C&K, featuring DPDT (Double Pole Double Throw) circuitry with On-On switching function. This through-hole, right-angle mounted component is rated for 7.5A at 125V AC and 28V DC, with epoxy sealed terminals and IP57 ingress protection. The component remains in active production status with 1136 units currently in stock.

Substitute parts are identified when equivalent electrical performance and mechanical compatibility can be maintained within the allowed parameter tolerances for toggle switch applications.

Substiute Parts

E201MD9AGE

C&KIn Stock: 1181E201MD9AGE Datasheet

Current PartRFQ

100DP1T2B4M6QE

E-SwitchIn Stock: 8284100DP1T2B4M6QE Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the E201MD9AGE is determined by the following critical parameters:

• Circuit configuration must be DPDT
• Switch function must be On-On
• Mounting type must be Through Hole, Right Angle
• Termination style must be PC Pin
• Operating temperature range must encompass -30°C to 85°C
• RoHS3 compliance must be maintained
• Current and voltage ratings must meet or exceed application requirements

The substitute part 100DP1T2B4M6QE from E-Switch meets the core electrical and mechanical compatibility criteria, with the exception of reduced current rating (5A versus 7.5A) and AC voltage rating (120V versus 125V). This substitute is suitable only for applications where the lower electrical ratings are acceptable.

Parameter Comparison

Engineering Selection Recommendations

The E201MD9AGE maintains active production status with ROHS3 compliance and REACH affected designation. The 100DP1T2B4M6QE substitute is also ROHS3 compliant but carries REACH unaffected status.

Selection between these components must be based on application current and voltage requirements. The E201MD9AGE is suitable for circuits requiring 7.5A at 125V AC. The 100DP1T2B4M6QE is suitable only for applications with maximum requirements of 5A at 120V AC. Both components share identical DC voltage ratings (28V), operating temperature ranges, electrical life specifications, and mechanical mounting characteristics.

Frequently Asked Questions (FAQ)

Q: Can the 100DP1T2B4M6QE replace the E201MD9AGE in all applications?

A: No. The 100DP1T2B4M6QE has reduced current (5A versus 7.5A) and AC voltage (120V versus 125V) ratings. Substitution is valid only when application requirements do not exceed these lower ratings.

Q: Are the mechanical dimensions compatible between these parts?

A: Both components feature Through Hole, Right Angle mounting with PC Pin termination. The E201MD9AGE has an actuator length of 6.86mm, while the 100DP1T2B4M6QE has 5.08mm. Panel cutout compatibility must be verified for specific applications.

Q: What is the difference in ingress protection between these parts?

A: The E201MD9AGE specifies IP57 (Dust Protected, Waterproof). The 100DP1T2B4M6QE does not specify an ingress protection rating. Applications requiring IP57 protection must use the E201MD9AGE.

Q: Are both parts RoHS compliant?

A: Yes. Both the E201MD9AGE and 100DP1T2B4M6QE are ROHS3 compliant. The E201MD9AGE is REACH affected, while the 100DP1T2B4M6QE is REACH unaffected.

Q: What is the electrical life expectancy for both components?

A: Both components are rated for 40,000 electrical cycles under specified operating conditions.