E14-8FB-L Equivalent & Substitute Parts

Part Overview

The E14-8FB-L is a StrongHold™ fork terminal manufactured by Panduit Corp, designed for crimp termination on 14-16 AWG wire. This non-insulated, 8 stud spade terminal connector features a tin-plated copper contact with butted seam construction. The product is currently obsolete, making identification of suitable substitute components essential for ongoing maintenance and repair applications where this terminal type is specified.

Substiute Parts

E14-8FB-L

Panduit CorpIn Stock: 1052E14-8FB-L Datasheet

Current PartRFQ

EV14-8FB-L

Panduit CorpIn Stock: 2035EV14-8FB-L Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The EV14-8FB-L qualifies as a substitute for the E14-8FB-L based on the following critical parameters that determine functional compatibility:

• Stud/Tab Size: Both parts feature 8 stud configuration, ensuring mechanical fit with mating connectors
• Wire Gauge: Both accommodate 14-16 AWG wire, maintaining electrical capacity
• Termination Method: Both use crimp termination, compatible with the same tooling
• Contact Material & Finish: Both use tin-plated copper contacts, ensuring electrical performance equivalence
• Tongue Inside Opening: Both measure 0.170" (4.32mm), confirming dimensional compatibility
• RoHS Compliance: Both meet ROHS3 requirements, satisfying regulatory requirements

The primary difference is insulation type: the E14-8FB-L is non-insulated, while the EV14-8FB-L is vinyl-insulated. This distinction affects application suitability but does not prevent substitution in contexts where insulation is beneficial or required.

Parameter Comparison

Engineering Selection Recommendations

The EV14-8FB-L serves as the active production equivalent for the obsolete E14-8FB-L. Both parts maintain identical electrical and mechanical specifications for the critical parameters governing terminal function: stud size, wire gauge capacity, contact material, and contact finish.

The EV14-8FB-L is currently in active production status with 1984 units in stock, compared to the E14-8FB-L's obsolete status with limited remaining inventory. Both parts satisfy ROHS3 compliance requirements.

The primary consideration for selection is insulation requirement. The EV14-8FB-L's vinyl insulation provides additional protection in applications where exposed contacts present a concern. The non-insulated E14-8FB-L may be preferred only in applications where insulation is explicitly contraindicated or where the specific non-insulated design is functionally required.

Frequently Asked Questions (FAQ)

Q: Can the EV14-8FB-L directly replace the E14-8FB-L in all applications?

A: The EV14-8FB-L matches all critical electrical and mechanical parameters. The vinyl insulation on the EV14-8FB-L is an addition that does not compromise compatibility. Applications requiring non-insulated terminals specifically should evaluate whether insulation presents a functional conflict.

Q: What is the significance of the length difference between these parts?

A: The E14-8FB-L measures 0.690" overall length, while the EV14-8FB-L measures 0.900". This difference results from the vinyl insulation material. Both parts maintain identical tongue inside opening dimensions (0.170"), ensuring compatibility with mating connectors.

Q: Are both parts RoHS compliant?

A: Yes. Both the E14-8FB-L and EV14-8FB-L meet ROHS3 compliance requirements.

Q: What wire gauges do these terminals accommodate?

A: Both terminals are rated for 14-16 AWG wire. This specification is identical across both parts.

Q: Why is the E14-8FB-L listed as obsolete?

A: The E14-8FB-L has been discontinued by Panduit Corp. The EV14-8FB-L represents the active production alternative within the StrongHold™ series for this terminal configuration.

Q: Are the crimp tooling requirements the same for both parts?

A: Yes. Both parts use crimp termination and are compatible with standard crimp tooling for 14-16 AWG terminals with 8 stud configuration.