DZ2W03300L Equivalent & Substitute Parts

Part Overview

The DZ2W03300L is a 3.3 V, 1 W Zener diode manufactured by Panasonic Electronic Components in the SOD-123F surface mount package. This component is designed for voltage regulation and protection applications requiring precise 3.3 V reference voltage with ±5% tolerance. The part is currently discontinued at DiGi Electronics, necessitating identification of functionally equivalent alternatives from active product lines. Substitute parts must maintain compatibility with the original electrical specifications and surface mount packaging requirements.

Substiute Parts

DZ2W03300L

Panasonic Electronic ComponentsIn Stock: 6779DZ2W03300L Datasheet

Current PartRFQ

KDZVTFTR3.3B

Rohm SemiconductorIn Stock: 6778KDZVTFTR3.3B Datasheet

SimilarRFQ

KDZVTR3.3B

Rohm SemiconductorIn Stock: 6440KDZVTR3.3B Datasheet

SimilarRFQ

MMSZ5226B_R1_00001

Panjit International Inc.In Stock: 7524MMSZ5226B_R1_00001 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the DZ2W03300L is determined by the following critical parameters:

Primary Substitution Criteria:

• Zener voltage nominal value: 3.3 V or 3.5 V (within application tolerance)
• Power dissipation rating: minimum 1 W or 500 mW depending on circuit requirements
• Voltage tolerance: ±5% or ±6.06%
• Surface mount packaging: SOD-123F or SOD-123
• Reverse leakage current: specified at 1 V reference
• RoHS compliance status

Substitution Logic: Parts KDZVTFTR3.3B and KDZVTR3.3B are functionally equivalent despite nominal Zener voltage of 3.5 V, as they maintain the same 1 W power rating, surface mount configuration, and SOD-123F package. These parts are suitable for applications where the 0.2 V voltage differential is acceptable within circuit design margins.

Part MMSZ5226B_R1_00001 provides exact voltage matching (3.3 V) and tolerance (±5%) but operates at reduced power capacity (500 mW). This part is suitable only for lower-power applications and uses the SOD-123 package variant.

Parameter Comparison

Engineering Selection Recommendations

For Full Parameter Equivalence (1 W Power Rating, SOD-123F Package):

KDZVTFTR3.3B and KDZVTR3.3B are the primary substitutes. Both parts are manufactured by Rohm Semiconductor with active product status and ROHS3 compliance. The 0.2 V nominal voltage difference (3.5 V vs. 3.3 V) and slightly wider tolerance (±6.06% vs. ±5%) require circuit-level evaluation to confirm acceptability. KDZVTFTR3.3B is supplied in Cut Tape and Digi-Reel packaging, while KDZVTR3.3B is supplied in Tape & Reel format. Both maintain the SOD-123F package and 1 W power rating of the original part.

For Exact Voltage and Tolerance Match (3.3 V, ±5%):

MMSZ5226B_R1_00001 manufactured by Panjit International Inc. provides identical nominal voltage (3.3 V) and tolerance (±5%) with active product status and ROHS3 compliance. This part operates at 500 mW maximum power, requiring confirmation that circuit power dissipation does not exceed this limit. The SOD-123 package is mechanically compatible with SOD-123F footprints in most applications. Lower reverse leakage current (25 µA vs. 100 µA) and lower impedance (28 Ohms vs. 100 Ohms) may provide improved performance in certain applications.

All substitute parts maintain MSL 1 (Unlimited) moisture sensitivity and are RoHS compliant, ensuring compatibility with standard manufacturing and storage environments.

Frequently Asked Questions (FAQ)

Q: Can KDZVTFTR3.3B or KDZVTR3.3B be used as direct replacements for DZ2W03300L?

A: Both Rohm parts are functionally equivalent for applications where the 3.5 V nominal voltage is acceptable within circuit design tolerances. The 0.2 V difference from the original 3.3 V specification must be evaluated against the application's voltage regulation requirements. Both parts maintain the 1 W power rating and SOD-123F package compatibility.

Q: What is the difference between KDZVTFTR3.3B and KDZVTR3.3B?

A: Both parts are electrically identical Rohm Semiconductor Zener diodes with 3.5 V nominal voltage and 1 W power rating. The primary difference is packaging format: KDZVTFTR3.3B is supplied in Cut Tape and Digi-Reel, while KDZVTR3.3B is supplied in Tape & Reel. Selection depends on assembly line equipment compatibility and procurement requirements.

Q: Is MMSZ5226B_R1_00001 suitable for all applications using DZ2W03300L?

A: MMSZ5226B_R1_00001 provides exact voltage (3.3 V) and tolerance (±5%) matching but operates at 500 mW maximum power versus the original 1 W rating. This part is suitable only for applications where circuit power dissipation does not exceed 500 mW. The SOD-123 package is mechanically compatible with SOD-123F footprints.

Q: Are all substitute parts RoHS compliant?

A: Yes. The original DZ2W03300L is RoHS Compliant, and all substitute parts (KDZVTFTR3.3B, KDZVTR3.3B, and MMSZ5226B_R1_00001) are ROHS3 Compliant, ensuring compatibility with RoHS-regulated manufacturing environments.

Q: What is the moisture sensitivity level for these parts?

A: All parts, including the original DZ2W03300L and all substitutes, have Moisture Sensitivity Level 1 (Unlimited), indicating no special moisture control requirements during storage or handling.

Q: How do the reverse leakage currents compare?

A: The original DZ2W03300L specifies 100 µA @ 1 V. KDZVTFTR3.3B and KDZVTR3.3B specify 80 µA @ 1 V (lower leakage). MMSZ5226B_R1_00001 specifies 25 µA @ 1 V (significantly lower leakage). Lower reverse leakage may improve circuit performance in precision applications.

Q: Can SOD-123 and SOD-123F packages be used interchangeably?

A: SOD-123 and SOD-123F packages are mechanically compatible on standard PCB footprints designed for either package type. However, PCB layout and footprint design should be verified to confirm compatibility with the specific package variant selected.