DZ2S100M0L Equivalent & Substitute Parts

Part Overview

The DZ2S100M0L is a 10 V, 150 mW Zener diode manufactured by Panasonic Electronic Components in the SSMini2-F5-B surface mount package. This component is classified as discontinued at DiGi Electronics, necessitating identification of equivalent substitute parts for ongoing design requirements and production needs. The part maintains ROHS3 compliance and unlimited moisture sensitivity rating (MSL 1), making it suitable for standard surface mount assembly processes.

Substiute Parts

DZ2S100M0L

Panasonic Electronic ComponentsIn Stock: 907DZ2S100M0L Datasheet

Current PartRFQ

BZX584C10_R1_00001

Panjit International Inc.In Stock: 10641BZX584C10_R1_00001 Datasheet

SimilarRFQ

EDZVFHT2R10B

Rohm SemiconductorIn Stock: 8230EDZVFHT2R10B Datasheet

SimilarRFQ

EDZVT2R10B

Rohm SemiconductorIn Stock: 132586EDZVT2R10B Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the DZ2S100M0L is determined by the following critical electrical and mechanical parameters:

Primary Substitution Criteria:

• Zener voltage: 10 V nominal
• Maximum power dissipation: 150 mW or greater
• Package compatibility: SC-79 or SOD-523 surface mount packages
• RoHS3 compliance
• MSL rating of 1 (Unlimited)

Secondary Compatibility Factors:

• Impedance (Zzt) at or below 30 Ohms maximum
• Voltage tolerance within ±5% or tighter
• Surface mount mounting type

The substitute parts identified below meet these criteria and are available in active production status, providing direct functional equivalence for the discontinued DZ2S100M0L.

Parameter Comparison

Engineering Selection Recommendations

EDZVFHT2R10B (Rohm Semiconductor) and EDZVT2R10B (Rohm Semiconductor) are the primary substitutes for the DZ2S100M0L. Both parts are manufactured by Rohm Semiconductor, maintain active product status, and provide electrical specifications that match or exceed the original component. The EDZVFHT2R10B carries AEC-Q101 automotive qualification, suitable for applications requiring automotive-grade reliability. The EDZVT2R10B offers extended temperature range operation (-55°C to 150°C) and maintains the largest available inventory (132,487 units), ensuring supply continuity.

BZX584C10_R1_00001 (Panjit International Inc.) serves as an alternative substitute with higher maximum power dissipation (200 mW) and lower impedance (20 Ohms), providing enhanced performance margin in applications where thermal headroom is beneficial. This part is available in active production with substantial inventory (10,619 units).

All three substitute parts maintain ROHS3 compliance, MSL 1 rating, and SC-79/SOD-523 package compatibility with the original DZ2S100M0L, ensuring direct mechanical and electrical interchangeability within surface mount assembly processes.

Frequently Asked Questions (FAQ)

Q: Can the BZX584C10_R1_00001 be used as a direct replacement for the DZ2S100M0L?

A: Yes. The BZX584C10_R1_00001 meets all primary substitution criteria: 10 V nominal zener voltage, 200 mW maximum power (exceeds 150 mW requirement), SC-79/SOD-523 package compatibility, ROHS3 compliance, and MSL 1 rating. The ±5% tolerance is within acceptable variance for zener diode applications. The 20 Ohm impedance provides improved performance compared to the 30 Ohm specification of the original part.

Q: What is the difference between EDZVFHT2R10B and EDZVT2R10B?

A: Both parts are manufactured by Rohm Semiconductor with identical electrical specifications (10 V, 150 mW, 30 Ohm impedance, 100 nA reverse leakage). The EDZVFHT2R10B includes AEC-Q101 automotive qualification and specifies maximum junction temperature of 150°C. The EDZVT2R10B provides extended operating temperature range (-55°C to 150°C) and significantly larger inventory availability (132,487 units versus 8,200 units). Selection depends on application requirements and supply chain priorities.

Q: Are all substitute parts available in the same package as the DZ2S100M0L?

A: Yes. All substitute parts utilize SC-79 or SOD-523 surface mount packages, matching the original DZ2S100M0L packaging. The supplier device packages differ (SSMini2-F5-B for the original, SOD-523 for BZX584C10_R1_00001, EMD2 for both Rohm parts), but all are mechanically compatible with standard surface mount assembly equipment and PCB footprints designed for SOD-523 packages.

Q: Which substitute part offers the best supply availability?

A: The EDZVT2R10B from Rohm Semiconductor provides the highest inventory level at 132,487 units in stock, ensuring reliable supply for production requirements. This part also maintains active product status with no discontinuation risk.

Q: Do the substitute parts maintain RoHS3 compliance?

A: Yes. All three substitute parts (BZX584C10_R1_00001, EDZVFHT2R10B, and EDZVT2R10B) are ROHS3 compliant and carry MSL 1 (Unlimited) moisture sensitivity ratings, matching the environmental and regulatory compliance profile of the original DZ2S100M0L.