DZ2J360M0L Equivalent & Substitute Parts

Part Overview

The DZ2J360M0L is a Zener diode manufactured by Panasonic Electronic Components, rated for 36 V nominal Zener voltage with 200 mW maximum power dissipation. This component is packaged in SC-90/SOD-323F surface mount configuration and features ±2.5% voltage tolerance. The part is currently discontinued at DiGi Electronics, necessitating identification of equivalent substitute components that maintain electrical and mechanical compatibility for ongoing production and repair applications.

Key Parameters

Parameter	Value
Voltage - Zener (Nom)	36 V
Tolerance	±2.5%
Power - Max	200 mW
Impedance (Max)	250 Ohms
Current - Reverse Leakage @ Vr	50 nA @ 27 V
Voltage - Forward (Max) @ If	1 V @ 10 mA
Mounting Type	Surface Mount
Package / Case	SC-90, SOD-323F
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)

Substitute Part Grouping Explanation

Substitute components for the DZ2J360M0L are qualified based on the following critical parameters that determine functional and mechanical compatibility:

Electrical Parameters:

Voltage - Zener (Nom): Must equal 36 V
Power - Max: Must equal or exceed 200 mW
Mounting Type: Must be Surface Mount
Package / Case: Must be SC-90 or SOD-323F

Compliance Parameters:

RoHS Status: Must be ROHS3 Compliant
Moisture Sensitivity Level: Must be 1 (Unlimited) or equivalent

The substitute parts identified (UDZVFHTE-1736B and UDZVTE-1736B, both from Rohm Semiconductor) satisfy all critical electrical and mechanical requirements. Both components are rated for 36 V Zener voltage, 200 mW power dissipation, and utilize the same SC-90/SOD-323F package configuration. Both are ROHS3 compliant with MSL 1 rating.

Parameter Comparison

Parameter	DZ2J360M0L (Panasonic)	UDZVFHTE-1736B (Rohm)	UDZVTE-1736B (Rohm)
Voltage - Zener (Nom)	36 V	36 V	36 V
Tolerance	±2.5%	±2.5%	Not specified
Power - Max	200 mW	200 mW	200 mW
Impedance (Max)	250 Ohms	300 Ohms	300 Ohms
Current - Reverse Leakage @ Vr	50 nA @ 27 V	100 nA @ 27 V	100 nA @ 27 V
Mounting Type	Surface Mount	Surface Mount	Surface Mount
Package / Case	SC-90, SOD-323F	SC-90, SOD-323F	SC-90, SOD-323F
Supplier Device Package	SMini2-F5-B	UMD2	UMD2
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Product Status	Discontinued at DiGi Electronics	Active	Active

Engineering Selection Recommendations

UDZVFHTE-1736B (Rohm Semiconductor) is suitable for applications requiring automotive-grade qualification. This part carries AEC-Q101 qualification and specifies an operating temperature of 150°C (TJ), making it appropriate for automotive and high-reliability applications. The part is currently active in inventory with 4,200 units available.

UDZVTE-1736B (Rohm Semiconductor) is suitable for general industrial and commercial applications. This part specifies an operating temperature range of -55°C to 150°C and maintains the highest inventory availability at 95,400 units. The part is currently active and offers the broadest temperature operating range.

Both substitute parts are ROHS3 compliant and carry REACH Unaffected status. Selection between the two Rohm alternatives depends on application-specific temperature requirements and automotive qualification needs. The impedance specification difference (250 Ohms for DZ2J360M0L versus 300 Ohms for both Rohm parts) and reverse leakage current difference (50 nA versus 100 nA) fall within acceptable tolerances for standard Zener diode applications and do not preclude substitution.

Frequently Asked Questions (FAQ)

Q: Can UDZVFHTE-1736B or UDZVTE-1736B be used as direct replacements for DZ2J360M0L?

A: Both Rohm parts are direct substitutes. All critical electrical parameters match: 36 V Zener voltage, 200 mW power rating, and identical SC-90/SOD-323F package configuration. Both are ROHS3 compliant with MSL 1 rating.

Q: What is the difference between UDZVFHTE-1736B and UDZVTE-1736B?

A: UDZVFHTE-1736B includes automotive-grade qualification (AEC-Q101) with operating temperature specified at 150°C (TJ). UDZVTE-1736B specifies a broader operating temperature range of -55°C to 150°C without automotive qualification. Both parts are electrically equivalent for the 36 V, 200 mW application.

Q: Are there package compatibility concerns when substituting these parts?

A: No. All three parts use SC-90/SOD-323F package configuration. The supplier device packages differ (SMini2-F5-B for Panasonic versus UMD2 for Rohm), but both are physically and electrically compatible with the same PCB footprint and solder reflow processes.

Q: How do the impedance and reverse leakage specifications differ?

A: The DZ2J360M0L specifies 250 Ohms maximum impedance and 50 nA reverse leakage at 27 V. Both Rohm substitutes specify 300 Ohms maximum impedance and 100 nA reverse leakage at 27 V. These differences are within normal manufacturing tolerances for Zener diodes and do not affect functional compatibility in standard voltage regulation and protection circuits.

Q: Which substitute part should be selected for new designs?

A: Selection depends on application requirements. For automotive applications requiring AEC-Q101 qualification, use UDZVFHTE-1736B. For general industrial and commercial applications with broader temperature range requirements, use UDZVTE-1736B. Both parts are currently active with adequate inventory availability.

Q: Are there any compliance or regulatory differences between the substitute parts?

A: All three parts are ROHS3 compliant and carry EAR99 ECCN classification. Both Rohm substitutes carry REACH Unaffected status. No compliance barriers exist for substitution in regulated applications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message