DZ2J130M0L Zener Diode Equivalent & Substitute Parts

Part Overview

The DZ2J130M0L is a 13 V, 200 mW Zener diode manufactured by Panasonic Electronic Components in the SC-90/SOD-323F surface mount package. This component is designed for voltage regulation and protection applications requiring a nominal Zener voltage of 13 V with ±2.5% tolerance. The part is currently discontinued at DiGi Electronics, necessitating identification of functionally equivalent alternatives from active product lines. Substitute parts must maintain the same electrical specifications and package compatibility to ensure direct replacement capability in existing circuit designs.

Substiute Parts

DZ2J130M0L

Panasonic Electronic ComponentsIn Stock: 6655DZ2J130M0L Datasheet

Current PartRFQ

UDZSTE-1713B

Rohm SemiconductorIn Stock: 53084UDZSTE-1713B Datasheet

SimilarRFQ

UDZVFHTE-1713B

Rohm SemiconductorIn Stock: 3373UDZVFHTE-1713B Datasheet

SimilarRFQ

UDZVTE-1713B

Rohm SemiconductorIn Stock: 35143UDZVTE-1713B Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the DZ2J130M0L are qualified based on the following electrical and mechanical parameters:

Critical Matching Parameters:

• Voltage - Zener (Nom): 13 V
• Power - Max: 200 mW
• Mounting Type: Surface Mount
• Package / Case: SC-90, SOD-323F

Acceptable Variation Parameters:

• Tolerance: ±2% to ±2.5% (tighter tolerance acceptable)
• Impedance (Max): 35 to 37 Ohms (minor variation acceptable)
• Current - Reverse Leakage @ Vr: 50 to 100 nA @ 10 V (within specification range)

All three substitute parts (UDZSTE-1713B, UDZVFHTE-1713B, UDZVTE-1713B) from Rohm Semiconductor meet these criteria. They maintain identical nominal Zener voltage and maximum power dissipation while operating in the same surface mount package. Impedance values remain within acceptable engineering limits, and reverse leakage current specifications are comparable or superior to the original part.

Parameter Comparison

Engineering Selection Recommendations

UDZSTE-1713B (Rohm Semiconductor) is the primary substitute for general-purpose applications. This part is active in production with 53,000 units in stock, offers ±2% tolerance (tighter than the original ±2.5%), and maintains full compatibility with the SC-90/SOD-323F package. ROHS3 compliance and unlimited moisture sensitivity rating ensure suitability for standard industrial and consumer electronics applications.

UDZVFHTE-1713B (Rohm Semiconductor) is the recommended substitute for automotive and high-reliability applications. This variant carries AEC-Q101 automotive qualification and is rated to 150°C junction temperature, providing enhanced thermal performance. With 3,300 units in stock, this part is suitable for automotive-grade circuit designs requiring certified component traceability.

UDZVTE-1713B (Rohm Semiconductor) serves as an alternative general-purpose substitute with the largest inventory (35,100 units). Operating temperature range of -55°C to 150°C matches or exceeds typical industrial requirements. This part is appropriate for cost-sensitive applications where automotive qualification is not required.

All three substitutes are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory standards. Selection between these options depends on application requirements, inventory availability, and thermal operating conditions rather than electrical performance, as all three maintain equivalent circuit functionality.

Frequently Asked Questions (FAQ)

Q: Can UDZSTE-1713B, UDZVFHTE-1713B, or UDZVTE-1713B be used as direct replacements for DZ2J130M0L?

A: Yes. All three Rohm Semiconductor parts are direct substitutes. They maintain identical nominal Zener voltage (13 V), maximum power dissipation (200 mW), and surface mount package configuration (SC-90/SOD-323F). Electrical performance is equivalent within specified tolerances.

Q: What is the difference between the three Rohm substitute parts?

A: UDZSTE-1713B is the standard industrial-grade option with ±2% tolerance. UDZVFHTE-1713B includes automotive qualification (AEC-Q101) and is rated to 150°C junction temperature for high-reliability applications. UDZVTE-1713B is a general-purpose variant with -55°C to 150°C operating range. All three share identical electrical specifications and package compatibility.

Q: Are there package compatibility concerns when substituting these parts?

A: No. All substitute parts use the SC-90/SOD-323F package designation with UMD2 supplier device package. Physical dimensions and PCB footprints are compatible. The original part used SMini2-F5-B supplier designation, but this refers to the same physical package format.

Q: Does the impedance difference (35 Ohms vs. 37 Ohms) affect circuit performance?

A: The impedance variation is within acceptable engineering limits for Zener diode applications. The 2-Ohm difference represents a 5.7% variation and does not compromise voltage regulation or protection functionality in standard circuit designs.

Q: Which substitute should be selected for new designs?

A: UDZSTE-1713B is recommended for new designs due to active production status, large inventory availability (53,000 units), and superior ±2% tolerance specification. UDZVFHTE-1713B should be selected if automotive qualification is required. UDZVTE-1713B is suitable when inventory or cost considerations are primary factors.

Q: Are all substitutes RoHS compliant?

A: Yes. All three Rohm substitutes carry ROHS3 compliance certification, exceeding the RoHS compliance status of the original Panasonic part. All parts are REACH unaffected.

Q: What is the moisture sensitivity rating for these substitutes?

A: All substitute parts carry MSL 1 (Unlimited) rating, identical to the original DZ2J130M0L. This indicates no moisture sensitivity restrictions for storage, handling, or reflow soldering processes.