Equivalent & Substitute Parts for DZ2J033M0L

Part Overview

The Panasonic DZ2J033M0L is a 3.3 V Zener diode rated at 200 mW for surface mount applications in the SC-90/SOD-323F package. This component is discontinued at DiGi Electronics, necessitating identification of functionally equivalent alternatives from active manufacturers. The part operates at a maximum junction temperature of 150°C and maintains RoHS compliance with unlimited moisture sensitivity rating (MSL 1).

Substiute Parts

DZ2J033M0L

Panasonic Electronic ComponentsIn Stock: 45268DZ2J033M0L Datasheet

Current PartRFQ

TFZVTR3.3B

Rohm SemiconductorIn Stock: 116158TFZVTR3.3B Datasheet

SimilarRFQ

UDZVFHTE-173.3B

Rohm SemiconductorIn Stock: 6938UDZVFHTE-173.3B Datasheet

SimilarRFQ

UDZVTE-173.3B

Rohm SemiconductorIn Stock: 20920UDZVTE-173.3B Datasheet

SimilarRFQ

YFZVFHTR3.3B

Rohm SemiconductorIn Stock: 3786YFZVFHTR3.3B Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the DZ2J033M0L is determined by the following critical parameters:

Primary Matching Criteria:

• Zener voltage nominal value: 3.3 V
• Mounting type: Surface Mount
• Reverse leakage current: 20 µA @ 1 V
• RoHS compliance status
• Moisture sensitivity level: MSL 1

Secondary Compatibility Factors:

• Power dissipation rating (equal or greater than 200 mW)
• Impedance characteristics (lower impedance indicates improved performance)
• Operating temperature range (minimum 150°C maximum junction temperature)
• Package compatibility (SC-90/SOD-323F or equivalent SMD packages)

The substitute parts are grouped into two categories based on power rating and package type:

Category A - Direct Power Rating Match (200 mW): Parts maintaining the original 200 mW specification with compatible packaging.

Category B - Enhanced Power Rating (500 mW): Parts with increased power dissipation capability, suitable for applications requiring thermal margin or higher current handling.

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement (Identical Specifications):

UDZVTE-173.3B and UDZVFHTE-173.3B are the primary substitutes, both rated at 3.3 V and 200 mW with SC-90/SOD-323F packaging. UDZVFHTE-173.3B carries AEC-Q101 automotive qualification, providing additional reliability assurance for mission-critical applications. Both parts are manufactured by Rohm Semiconductor with active product status and ROHS3 compliance.

For Enhanced Thermal Performance:

TFZVTR3.3B offers 500 mW power dissipation with improved impedance characteristics (70 Ohms versus 130 Ohms), enabling superior voltage regulation and reduced thermal stress. This part uses TUMD2M packaging (2-SMD, Flat Lead) and requires PCB layout verification for mechanical compatibility.

For Automotive Applications:

UDZVFHTE-173.3B and YFZVFHTR3.3B both carry AEC-Q101 qualification. YFZVFHTR3.3B operates at 3.43 V nominal (within ±3.07% tolerance) with 500 mW rating and automotive-grade certification, suitable for applications requiring enhanced reliability standards.

Compliance Considerations:

All substitute parts maintain MSL 1 (unlimited moisture sensitivity) and ROHS3 compliance status, ensuring compatibility with modern manufacturing and environmental requirements. REACH status is unaffected for all Rohm alternatives.

Frequently Asked Questions (FAQ)

Q: Can UDZVTE-173.3B directly replace DZ2J033M0L without circuit modification?

A: Yes. Both parts share identical zener voltage (3.3 V), power rating (200 mW), reverse leakage current (20 µA @ 1 V), and SC-90/SOD-323F packaging. No circuit modifications are required.

Q: What is the advantage of selecting TFZVTR3.3B over the 200 mW alternatives?

A: TFZVTR3.3B provides 500 mW power dissipation with lower impedance (70 Ohms), enabling improved voltage regulation stability and reduced junction temperature rise under load. This is beneficial in applications with variable current demands or thermal constraints.

Q: Does the TUMD2M package of TFZVTR3.3B fit the same PCB footprint as SC-90/SOD-323F?

A: No. TUMD2M (2-SMD, Flat Lead) and SC-90/SOD-323F are different package geometries. PCB layout and footprint verification is required before substitution. Consult package datasheets for dimensional specifications.

Q: Why does YFZVFHTR3.3B have a different zener voltage (3.43 V) than the original part?

A: YFZVFHTR3.3B is rated at 3.43 V nominal with ±3.07% tolerance. This voltage is outside the 3.3 V specification and is suitable only for applications with voltage tolerance margins. Use only when circuit design permits this voltage deviation.

Q: Are all substitute parts RoHS compliant?

A: Yes. All substitute parts carry ROHS3 compliance certification. The original DZ2J033M0L is RoHS Compliant. All alternatives meet or exceed current RoHS requirements.

Q: Which substitute part is recommended for automotive applications?

A: UDZVFHTE-173.3B and YFZVFHTR3.3B both carry AEC-Q101 automotive qualification. UDZVFHTE-173.3B maintains the original 3.3 V specification, while YFZVFHTR3.3B offers enhanced power rating with automotive-grade certification.

Q: What is the operating temperature range difference between substitutes?

A: DZ2J033M0L specifies 150°C maximum. UDZVTE-173.3B and TFZVTR3.3B extend the range to -55°C ~ 150°C, providing wider temperature operation capability. UDZVFHTE-173.3B and YFZVFHTR3.3B specify 150°C (TJ) maximum, matching the original specification.

Q: Can impedance differences affect circuit performance?

A: Yes. Lower impedance (70 Ohms in TFZVTR3.3B and YFZVFHTR3.3B versus 130 Ohms in DZ2J033M0L) provides improved voltage regulation and reduced output impedance. This is advantageous in precision voltage reference applications but requires no circuit modification for standard voltage clamping functions.