DX10GM-68S(50) Equivalent & Substitute Parts

Part Overview

The DX10GM-68S(50) is a 68-position miniature high-density D-Sub receptacle connector manufactured by Hirose Electric Co Ltd. This panel-mount, through-hole component features right-angle solder termination and gold-plated contacts. The part is designated as Last Time Buy, indicating discontinued production status. Identifying equivalent and substitute parts is essential for ongoing procurement, design updates, and long-term supply chain management.

Substiute Parts

DX10GM-68S(50)

Hirose Electric Co LtdIn Stock: 975DX10GM-68S(50) Datasheet

Current PartRFQ

10268-55G3 PC

3MIn Stock: 120110268-55G3 PC Datasheet

MFR RecommendedRFQ

10268-55H3PC

3MIn Stock: 234910268-55H3PC Datasheet

MFR RecommendedRFQ

2-5178238-8

TE Connectivity AMP ConnectorsIn Stock: 9152-5178238-8 Datasheet

MFR RecommendedRFQ

N10268-5242PC

3MIn Stock: 1396N10268-5242PC Datasheet

MFR RecommendedRFQ

N10268-5243PC

3MIn Stock: 955N10268-5243PC Datasheet

MFR RecommendedRFQ

N10268-52B2PC

3MIn Stock: 1171N10268-52B2PC Datasheet

MFR RecommendedRFQ

N10268-52E2PC

3MIn Stock: 1222N10268-52E2PC Datasheet

MFR RecommendedRFQ

N10268-52E3PC

3MIn Stock: 896N10268-52E3PC Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the DX10GM-68S(50) are qualified based on the following critical parameters:

• Position Count: 68 positions (mandatory match)
• Row Configuration: 2 rows (mandatory match)
• Connector Type: Receptacle (mandatory match)
• Mounting Configuration: Panel mount, through-hole, right-angle orientation (mandatory match)
• Termination Method: Solder (mandatory match)
• Contact Finish: Gold plating (mandatory match)
• Compliance: RoHS compliant (mandatory match)
• Moisture Sensitivity: MSL 1 (mandatory match)

Substitute parts may vary in flange feature specifications (housing/shell dimensions), latchblock presence, and shielding characteristics, provided all mandatory parameters remain consistent. The following parts meet these substitution criteria.

Parameter Comparison

Engineering Selection Recommendations

For new designs and ongoing procurement, the 3M 102 Mini D Ribbon (MDR) series parts (10268-55G3PC, 10268-55H3PC, N10268-5242PC, N10268-5243PC, N10268-52B2PC, N10268-52E2PC, N10268-52E3PC) are preferred due to active product status and full RoHS compliance. These parts maintain all critical electrical and mechanical parameters required for direct substitution.

The TE Connectivity 2-5178238-8 (CHAMP .050 II series) meets all mandatory substitution criteria but carries obsolete product status, limiting its suitability for new applications.

Selection among active 3M alternatives should be based on specific flange feature requirements (M2.5, M2.6, or 4-40 specifications), latchblock presence, and shielding needs as determined by application requirements.

Frequently Asked Questions (FAQ)

Q: Can the DX10GM-68S(50) be directly replaced with any of the listed substitute parts?

A: Yes, all listed substitute parts meet the mandatory substitution criteria: 68 positions, 2-row configuration, receptacle type, panel-mount through-hole right-angle orientation, solder termination, gold contact finish, RoHS compliance, and MSL 1 rating. Physical mounting and electrical performance are compatible.

Q: What is the difference between the 3M substitute parts?

A: The 3M parts differ in flange feature specifications (M2.5, M2.6, or 4-40 housing/shell dimensions), presence of latchblocks, and shielding characteristics. All maintain identical position count, row configuration, termination method, and contact finish. Selection depends on specific mechanical mounting requirements and EMI shielding needs.

Q: Why is the TE Connectivity 2-5178238-8 listed if it is obsolete?

A: The 2-5178238-8 meets all mandatory electrical and mechanical substitution parameters and may be available in existing inventory. However, its obsolete status makes it unsuitable for new designs or long-term supply commitments.

Q: Are there packaging differences among the substitute parts?

A: Yes. Packaging varies between Tray, Bulk, Box, and unspecified formats. Packaging does not affect electrical or mechanical compatibility but may influence procurement logistics and handling requirements.

Q: What flange feature should I select?

A: Flange feature selection (M2.5, M2.6, or 4-40) depends on your panel thickness and mounting hole specifications. Consult your mechanical design documentation to determine the appropriate housing/shell dimension for your application.