Bulgin DX1092/D1 LED Panel Indicator - Equivalent & Substitute Parts

Part Overview

The Bulgin DX1092/D1 is an LED panel indicator featuring dual-color operation with green and red lamp outputs. This component is designed for applications requiring visual status indication with simultaneous green and red LED capability. The part is currently in active production status with 1106 units available in inventory. Alternative equivalent parts may be required due to supply chain considerations, design revisions, or specific application requirements where functionally identical components are needed.

Substiute Parts

DX1092/D1

BulginIn Stock: 1214DX1092/D1 Datasheet

Current PartRFQ

DX1090/D1

BulginIn Stock: 1277DX1090/D1 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the DX1092/D1 is determined by strict equivalence across the following critical parameters:

• Dual-color LED configuration (Green and Red)
• Forward voltage specifications: 2.2V for both green and red channels
• Maximum current ratings: 30mA for both green and red channels
• Physical form factor: 5mm, T-1 3/4 lens with round domed top
• Panel mounting interface: 0.315" (8.00mm) round cutout
• Termination method: PC Pin configuration
• Environmental rating: IP66 ingress protection
• Compliance certifications: ROHS3 Compliant, REACH Unaffected

The Bulgin DX1090/D1 meets all these criteria and is classified as a parametric equivalent. Both parts share identical electrical specifications, mechanical dimensions, and environmental ratings, making them directly interchangeable in applications where the DX1092/D1 is specified.

Parameter Comparison

Engineering Selection Recommendations

Both the DX1092/D1 and DX1090/D1 are active production components manufactured by Bulgin with full ROHS3 compliance and REACH unaffected status. Selection between these parts should be based on:

• Inventory availability: DX1092/D1 has 1106 units in stock; DX1090/D1 has 1198 units in stock
• Supply chain lead times and procurement timelines
• Design documentation and bill of materials specifications
• Compliance requirements for your specific application region

Both parts satisfy identical electrical, mechanical, and environmental specifications. No performance degradation or functional compromise occurs when substituting one part for the other in applications where either is specified.

Frequently Asked Questions (FAQ)

Q: Are the DX1092/D1 and DX1090/D1 truly interchangeable?

A: Yes. Both parts share identical electrical ratings (2.2V forward voltage, 30mA maximum current for both channels), mechanical dimensions (8.00mm round cutout, 5mm T-1 3/4 lens), brightness specifications (5mcd green, 4.5mcd red), and environmental ratings (IP66). They are direct parametric equivalents.

Q: Will substituting DX1090/D1 for DX1092/D1 require PCB modifications?

A: No. Both parts use identical PC Pin termination and fit the same 0.315" (8.00mm) round panel cutout. No PCB layout changes are necessary.

Q: Do both parts meet the same compliance standards?

A: Yes. Both the DX1092/D1 and DX1090/D1 are ROHS3 compliant and REACH unaffected, with identical moisture sensitivity levels (MSL 1 - Unlimited).

Q: What is the difference between these two part numbers?

A: The provided specifications indicate no functional or electrical differences between DX1092/D1 and DX1090/D1. The difference exists only in the series designation (DX1092 versus DX1090) and inventory availability.

Q: Can I use either part in new designs?

A: Yes. Both parts are in active production status and suitable for new design implementations where dual-color LED panel indication with 2.2V/30mA specifications is required.