DTS24F13-35SA Equivalent & Substitute Parts

Part Overview

The DTS24F13-35SA is a 22-position circular connector receptacle manufactured by TE Connectivity Deutsch Connectors, designed for panel mount applications with female sockets and crimp termination. This connector is compliant with MIL-DTL-38999 Series III specifications and features gold-plated mating contacts rated for 5A continuous current. The part is discontinued at DiGi Electronics, necessitating identification of equivalent alternatives that maintain electrical and mechanical compatibility for ongoing system support and procurement.

Substiute Parts

DTS24F13-35SA

TE Connectivity Deutsch ConnectorsIn Stock: 1011DTS24F13-35SA Datasheet

Current PartRFQ

CTV07RW-13-35BA

Amphenol Aerospace OperationsIn Stock: 1070CTV07RW-13-35BA Datasheet

SimilarRFQ

CTV07RW-13-35SA

Amphenol Aerospace OperationsIn Stock: 823CTV07RW-13-35SA Datasheet

SimilarRFQ

D38999/24WC35SA

GlenairIn Stock: 10695D38999/24WC35SA Datasheet

SimilarRFQ

D38999/24WC35SA

GlenairIn Stock: 10695D38999/24WC35SA Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the DTS24F13-35SA is determined by strict adherence to the following critical parameters:

Mandatory Matching Parameters:

• 22-position connector configuration
• Shell size 13-35 (MIL-DTL-38999 Series III compatible)
• Panel mount bulkhead installation with threaded fastening
• Female socket receptacle type
• Crimp termination method
• Orientation A alignment
• Operating temperature range compatibility (-65°C minimum, 200°C maximum preferred)
• Current rating of 5A or greater
• Ingress protection for sealed environments

Acceptable Variations:

• Shell material (aluminum or composite alternatives)
• Shell finish (nickel, cadmium, or equivalent protective coatings)
• Contact finish composition (gold or equivalent noble metal plating)
• Housing color (silver, olive drab, or other standard finishes)
• Specific series designation within MIL-DTL-38999 Series III family

Substitute parts must maintain mechanical interchangeability with mating connectors and preserve electrical performance characteristics across the specified operating envelope.

Parameter Comparison

Engineering Selection Recommendations

Primary Substitute: D38999/24WC35SA (Glenair)

The D38999/24WC35SA represents the optimal substitute for the discontinued DTS24F13-35SA. This part maintains full mechanical and electrical compatibility across all critical parameters: 22-position configuration, 13-35 shell size, panel mount bulkhead installation, crimp termination, and threaded fastening. The part is currently active in production with substantial inventory availability (10,600 pieces). Export classification (EAR99) and moisture sensitivity rating (MSL 1) align with the original specification. REACH compliance status differs but does not preclude substitution in applications where REACH Affected status is not a contractual requirement.

Secondary Substitute: CTV07RW-13-35SA (Amphenol Aerospace Operations)

The CTV07RW-13-35SA provides an alternative from Amphenol Aerospace Operations within the MIL-DTL-38999 Series III family. This part maintains mechanical compatibility and is currently active. Inventory availability is adequate (768 pieces). Detailed electrical and environmental specifications are not fully documented in available data; however, the part number structure and series designation indicate compatibility with the original application envelope.

Conditional Substitute: CTV07RW-13-35BA (Amphenol Aerospace Operations)

The CTV07RW-13-35BA is mechanically compatible but presents operational constraints. This part is specified as a receptacle housing without integrated contacts (contacts not included), requiring separate procurement and assembly of contact elements. Operating temperature maximum is reduced to 175°C compared to the original 200°C specification. RoHS non-compliance status may restrict use in regulated applications. This option is suitable only when contact assembly is performed in-house and temperature derating is acceptable.

Compliance Considerations:

Applications requiring ROHS3 compliance should prioritize the original DTS24F13-35SA if available from alternative distributors, or confirm RoHS status of substitute parts with manufacturers. The D38999/24WC35SA (Glenair) and CTV07RW-13-35SA (Amphenol) are recommended for applications where REACH Affected or RoHS non-compliant status presents no contractual restrictions.

Frequently Asked Questions (FAQ)

Q: Can the D38999/24WC35SA directly replace the DTS24F13-35SA in existing assemblies?

A: Yes. Both connectors share identical shell size (13-35), position count (22), mounting configuration (panel mount bulkhead), termination method (crimp), and fastening type (threaded). Mechanical interchangeability with mating connectors is maintained. Electrical performance across the 5A current rating and operating temperature range is equivalent.

Q: What is the significance of the CTV07RW-13-35BA note stating "Contacts Not Included"?

A: The CTV07RW-13-35BA is supplied as a receptacle housing shell only, without the 22 female socket contacts. This part requires separate procurement of compatible crimp contacts and manual assembly before use. The DTS24F13-35SA and other recommended substitutes include integrated contacts and are ready for immediate installation.

Q: Does the 175°C maximum operating temperature of the CTV07RW-13-35BA affect substitution suitability?

A: The CTV07RW-13-35BA operating temperature maximum of 175°C is lower than the original DTS24F13-35SA specification of 200°C. Substitution is acceptable only in applications where the actual operating environment does not exceed 175°C. Applications requiring sustained operation above 175°C must use the original part or alternatives with 200°C ratings.

Q: What is the difference between RoHS3 Compliant and RoHS non-compliant status?

A: RoHS3 Compliant (DTS24F13-35SA) indicates the part meets Restriction of Hazardous Substances Directive requirements and contains no prohibited substances above specified thresholds. RoHS non-compliant parts (CTV07RW-13-35BA) may contain restricted substances and are subject to regulatory limitations in certain markets and applications. Selection depends on end-use regulatory requirements.

Q: Are all substitute parts classified under the same ECCN export control category?

A: The DTS24F13-35SA, CTV07RW-13-35BA, and D38999/24WC35SA are all classified as EAR99, indicating they are not subject to specific export licensing requirements. This classification consistency simplifies procurement and supply chain management across substitute options.

Q: What inventory considerations should guide substitute selection?

A: The D38999/24WC35SA (Glenair) offers the highest inventory availability at 10,600 pieces, providing supply chain security for high-volume applications. The CTV07RW-13-35SA (Amphenol) and CTV07RW-13-35BA (Amphenol) offer moderate availability at 768 and 1,054 pieces respectively. Selection should balance immediate availability requirements against long-term supply continuity.

Q: Can substitutes be mixed within a single assembly or system?

A: Mechanical and electrical compatibility permits use of different substitute parts within the same system, provided each connector pair (plug and receptacle) uses matching parts from the same manufacturer. Mixing manufacturers within a single mated pair is not recommended without explicit compatibility verification from the connector manufacturers.