DTC124EUA-TP Equivalent & Substitute Parts

Part Overview

The DTC124EUA-TP is a pre-biased NPN bipolar junction transistor (BJT) manufactured by Micro Commercial Co in SOT-323 surface mount packaging. This component is designed for general-purpose switching and amplification applications requiring 50 V collector-emitter breakdown voltage and 100 mA maximum collector current. The device is Active status and RoHS3 compliant, making it suitable for modern electronic applications. Equivalent and substitute parts are identified based on matching electrical characteristics, package compatibility, and functional performance parameters to ensure seamless integration in circuit designs.

Key Parameters

Parameter	Value	Unit
Transistor Type	NPN - Pre-Biased	—
Current - Collector (Ic) (Max)	100	mA
Voltage - Collector Emitter Breakdown (Max)	50	V
Resistor - Base (R1)	22	kOhms
Resistor - Emitter Base (R2)	22	kOhms
DC Current Gain (hFE) (Min) @ Ic, Vce	56 @ 5mA, 5V	—
Vce Saturation (Max) @ Ib, Ic	300	mV @ 500µA, 10mA
Current - Collector Cutoff (Max)	500	nA
Frequency - Transition	250	MHz
Power - Max	200	mW
Package / Case	SC-70, SOT-323	—
Mounting Type	Surface Mount	—
RoHS Status	ROHS3 Compliant	—
Moisture Sensitivity Level (MSL)	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitute parts for the DTC124EUA-TP are identified based on the following critical parameters that determine functional equivalence:

Primary Matching Criteria:

Transistor Type: NPN - Pre-Biased
Maximum Collector Current (Ic): 100 mA
Collector-Emitter Breakdown Voltage: 50 V
Base Resistor (R1): 22 kOhms
Emitter-Base Resistor (R2): 22 kOhms
Package Type: SOT-323 or SC-70 (equivalent)
Mounting Type: Surface Mount
RoHS3 Compliance and MSL Level 1

Direct Equivalents maintain all electrical parameters and internal resistor values identical to the DTC124EUA-TP, ensuring pin-for-pin compatibility with no circuit modifications required.

Similar Parts share the same voltage and current ratings, package type, and pre-biased NPN configuration but differ in internal resistor values (R1 and/or R2), DC current gain characteristics, or transition frequency. These parts require circuit evaluation to confirm suitability for specific applications.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Ic (Max) mA	Vce Breakdown (Max) V	R1 (Base) kOhms	R2 (Emitter-Base) kOhms	hFE (Min) @ Ic, Vce	Vce Sat (Max) mV	Frequency MHz	Power (Max) mW	Package
DTC124EUA-TP	Micro Commercial Co	100	50	22	22	56 @ 5mA, 5V	300	250	200	SOT-323
SMUN5212T1G	onsemi	100	50	22	22	60 @ 5mA, 10V	250	—	202	SC-70-3
DDTC124EUA-7-F	Diodes Incorporated	100	50	22	22	56 @ 5mA, 5V	300	250	200	SOT-323
DTC124EUAT106	Rohm Semiconductor	30	50	22	22	56 @ 5mA, 5V	300	250	200	UMT3
DTC143EUAT106	Rohm Semiconductor	100	50	4.7	4.7	30 @ 10mA, 5V	300	250	200	UMT3
DTC144EUAT106	Rohm Semiconductor	30	50	47	47	68 @ 5mA, 5V	300	250	200	UMT3
MUN5212T1G	onsemi	100	50	22	2.2	60 @ 5mA, 10V	250	—	202	SC-70-3
PDTC124EU,115	Nexperia USA Inc.	100	50	22	22	60 @ 5mA, 5V	150	230	200	SOT-323

Engineering Selection Recommendations

Direct Substitutes (Pin-for-Pin Compatible):

The DDTC124EUA-7-F (Diodes Incorporated) is a direct electrical equivalent to the DTC124EUA-TP. Both devices share identical maximum collector current (100 mA), collector-emitter breakdown voltage (50 V), internal resistor values (22 kOhms / 22 kOhms), DC current gain characteristics (56 @ 5mA, 5V), saturation voltage (300 mV), and transition frequency (250 MHz). Both are RoHS3 compliant with MSL Level 1 rating and Active product status. The SOT-323 package ensures mechanical and electrical compatibility without PCB layout modifications.

The PDTC124EU,115 (Nexperia USA Inc.) is functionally equivalent with matching 100 mA collector current, 50 V breakdown voltage, and 22 kOhms internal resistor configuration. This part exhibits superior saturation voltage performance (150 mV versus 300 mV) and maintains 230 MHz transition frequency. RoHS3 compliance and MSL Level 1 rating confirm suitability for equivalent applications.

Qualified Substitutes (Electrical Equivalence with Package Variation):

The SMUN5212T1G and MUN5212T1G (onsemi) both provide 100 mA collector current and 50 V breakdown voltage with 22 kOhms base resistor. SMUN5212T1G maintains identical emitter-base resistor value (22 kOhms), while MUN5212T1G uses 2.2 kOhms. Both employ SC-70-3 packaging (functionally equivalent to SOT-323) and deliver superior saturation voltage (250 mV). These parts are RoHS3 compliant with MSL Level 1 rating and Active status.

Application-Specific Alternatives (Resistor Value Variations):

The DTC143EUAT106 (Rohm Semiconductor) maintains 100 mA collector current and 50 V breakdown voltage but incorporates lower internal resistor values (4.7 kOhms / 4.7 kOhms) and reduced DC current gain (30 @ 10mA, 5V). This configuration suits applications requiring faster switching response and lower base drive requirements. UMT3 package provides SOT-323 equivalent functionality.

The DTC144EUAT106 (Rohm Semiconductor) features higher internal resistor values (47 kOhms / 47 kOhms) with elevated DC current gain (68 @ 5mA, 5V) and reduced maximum collector current (30 mA). This variant is suitable for low-current applications requiring higher input impedance.

The DTC124EUAT106 (Rohm Semiconductor) matches the DTC124EUA-TP resistor configuration (22 kOhms / 22 kOhms) but limits collector current to 30 mA. This part is appropriate for applications with reduced current requirements while maintaining identical biasing characteristics.

All substitute parts maintain RoHS3 compliance, MSL Level 1 rating, and Active product status, confirming regulatory and environmental compatibility with the original DTC124EUA-TP specification.

Frequently Asked Questions (FAQ)

Q: Can DDTC124EUA-7-F replace DTC124EUA-TP without circuit modifications?

A: Yes. The DDTC124EUA-7-F is a direct electrical equivalent with identical maximum collector current (100 mA), collector-emitter breakdown voltage (50 V), internal resistor values (22 kOhms / 22 kOhms), DC current gain (56 @ 5mA, 5V), and saturation voltage (300 mV). Both use SOT-323 packaging. No circuit modifications are required.

Q: What is the difference between SMUN5212T1G and MUN5212T1G?

A: Both parts share 100 mA collector current, 50 V breakdown voltage, and 22 kOhms base resistor. The primary difference is the emitter-base resistor: SMUN5212T1G uses 22 kOhms (matching DTC124EUA-TP), while MUN5212T1G uses 2.2 kOhms. This affects biasing characteristics and switching speed. Both use SC-70-3 packaging (equivalent to SOT-323).

Q: Why do DTC143EUAT106 and DTC144EUAT106 have different resistor values?

A: Internal resistor values determine the pre-biased transistor's switching characteristics and input impedance. DTC143EUAT106 uses 4.7 kOhms for faster switching response, while DTC144EUAT106 uses 47 kOhms for higher input impedance applications. These variations allow selection based on specific circuit requirements while maintaining the same voltage and power ratings.

Q: Is PDTC124EU,115 compatible with DTC124EUA-TP?

A: Yes, with performance advantages. PDTC124EU,115 matches the 100 mA collector current, 50 V breakdown voltage, and 22 kOhms resistor configuration. It delivers superior saturation voltage performance (150 mV versus 300 mV), enabling faster switching. Both are RoHS3 compliant with MSL Level 1 rating and Active status.

Q: Can I use DTC124EUAT106 in place of DTC124EUA-TP?

A: DTC124EUAT106 is suitable only for applications with maximum collector current requirements of 30 mA or less. It maintains identical resistor values (22 kOhms / 22 kOhms) and DC current gain characteristics (56 @ 5mA, 5V) but reduces maximum collector current from 100 mA to 30 mA. Circuit current requirements must be verified before substitution.

Q: What packaging differences exist among substitute parts?

A: DTC124EUA-TP, DDTC124EUA-7-F, and PDTC124EU,115 use SOT-323 packaging. SMUN5212T1G and MUN5212T1G use SC-70-3 packaging (functionally equivalent to SOT-323). DTC124EUAT106, DTC143EUAT106, and DTC144EUAT106 use UMT3 packaging (also functionally equivalent to SOT-323). All three package types are surface mount with identical pin configurations and mechanical compatibility.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All listed substitute parts maintain RoHS3 compliance and MSL Level 1 (Unlimited) moisture sensitivity rating, matching the DTC124EUA-TP specification. All parts are Active status, confirming current availability and regulatory compliance.

Q: Which substitute offers the best saturation voltage performance?

A: PDTC124EU,115 delivers the lowest saturation voltage at 150 mV (measured at 500µA base current, 10 mA collector current), compared to 300 mV for DTC124EUA-TP. SMUN5212T1G and MUN5212T1G also provide improved saturation voltage at 250 mV. Lower saturation voltage reduces power dissipation in switching applications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message