DTC114TCA-TP Equivalent & Substitute Parts

Part Overview

The DTC114TCA-TP is a pre-biased NPN bipolar junction transistor (BJT) manufactured by Micro Commercial Co, designed for surface mount applications in the SOT-23 package. This component operates at 50 V collector-emitter breakdown voltage with a maximum collector current of 100 mA and transition frequency of 250 MHz. The device features a 10 kOhm base resistor and is rated for 200 mW maximum power dissipation.

The DTC114TCA-TP is classified as an active product with ROHS3 compliance and unlimited moisture sensitivity level (MSL 1). Equivalent and substitute parts are necessary when the original part becomes unavailable, when alternative packaging formats are required for manufacturing processes, or when design modifications necessitate different internal resistor configurations while maintaining electrical compatibility.

Key Parameters

Parameter	Value	Unit
Transistor Type	NPN - Pre-Biased	—
Collector-Emitter Breakdown Voltage (Max)	50	V
Collector Current (Max)	100	mA
Base Resistor (R1)	10	kOhms
DC Current Gain (hFE Min) @ Ic, Vce	100 @ 1mA, 5V	—
Vce Saturation (Max) @ Ib, Ic	300	mV
Transition Frequency	250	MHz
Power Dissipation (Max)	200	mW
Package Type	SOT-23-3	—
Mounting Type	Surface Mount	—

Substitute Part Grouping Explanation

Substitution of the DTC114TCA-TP is determined by strict electrical and mechanical compatibility criteria. The following parameters must remain constant or within acceptable tolerances for direct substitution:

Critical Parameters for Direct Substitution:

Transistor type: NPN - Pre-Biased
Collector-emitter breakdown voltage: 50 V
Maximum collector current: 100 mA
Base resistor value: 10 kOhms
DC current gain (hFE): 100 @ 1mA, 5V
Transition frequency: 250 MHz
Power dissipation: 200 mW
Package: SOT-23-3 (TO-236-3, SC-59)

Direct Substitutes maintain all electrical parameters and differ only in manufacturer, packaging format (Tape & Reel vs. Cut Tape), or supplier device package designation (SOT-23 vs. SOT-23-3 vs. SST3 vs. SMT3).

Similar Parts share the same base electrical specifications but incorporate different internal resistor configurations (R1 or R2 values) or different DC current gain characteristics. These parts are functionally similar but require circuit-level evaluation before substitution.

Parameter Comparison

Part Number	Manufacturer	Ic (Max) mA	Vce(br) V	R1/R2 kOhms	hFE @ Ic, Vce	Vce Sat mV	Fт MHz	Package	Status
DTC114TCA-TP	Micro Commercial Co	100	50	10 (R1)	100 @ 1mA, 5V	300	250	SOT-23	Active
DDTC114TCA-7-F	Diodes Incorporated	100	50	10 (R1)	100 @ 1mA, 5V	300	250	SOT-23-3	Active
DTC114TCAT116	Rohm Semiconductor	100	50	10 (R1)	100 @ 1mA, 5V	300	250	SST3	Active
DTC114TKAT146	Rohm Semiconductor	100	50	10 (R1)	100 @ 1mA, 5V	300	250	SMT3	Active
DDTC114GCA-7-F	Diodes Incorporated	100	50	10 (R2)	30 @ 5mA, 5V	300	250	SOT-23-3	Active
DDTC115GCA-7-F	Diodes Incorporated	100	50	100 (R2)	82 @ 5mA, 5V	300	250	SOT-23-3	Active
DDTC123TCA-7-F	Diodes Incorporated	100	50	2.2 (R1)	100 @ 1mA, 5V	300	250	SOT-23-3	Active
DDTC124TCA-7-F	Diodes Incorporated	100	50	22 (R1)	100 @ 1mA, 5V	300	250	SOT-23-3	Active
DDTC125TCA-7-F	Diodes Incorporated	100	50	—	—	300	250	SOT-23-3	Obsolete
DDTC143TCA-7-F	Diodes Incorporated	100	50	4.7 (R1)	100 @ 1mA, 5V	300	250	SOT-23-3	Active
DDTC144GCA-7-F	Diodes Incorporated	100	50	47 (R2)	68 @ 5mA, 5V	300	250	SOT-23-3	Active

Engineering Selection Recommendations

Direct Substitutes (Electrically and Functionally Equivalent):

The following parts maintain identical electrical specifications and internal resistor configuration (10 kOhm base resistor) and are suitable for direct substitution without circuit modification:

DDTC114TCA-7-F (Diodes Incorporated): Active product with full compliance. Differs only in packaging format (Tape & Reel) and supplier device package designation (SOT-23-3). Inventory availability: 4200 units.
DTC114TCAT116 (Rohm Semiconductor): Active product with full compliance. Supplied in Cut Tape & Digi-Reel format with SST3 package designation. Inventory availability: 3112 units.
DTC114TKAT146 (Rohm Semiconductor): Active product with full compliance. Supplied in Cut Tape & Digi-Reel format with SMT3 package designation. Highest inventory availability: 186,620 units.

All three direct substitutes maintain ROHS3 compliance, MSL 1 rating, and REACH unaffected status identical to the DTC114TCA-TP.

Similar Parts (Functionally Related, Requires Circuit Evaluation):

The following parts share the same voltage, current, frequency, and power ratings but incorporate different internal resistor values or current gain characteristics. Selection requires verification of circuit requirements:

DDTC123TCA-7-F: 2.2 kOhm base resistor (vs. 10 kOhm). Lower base resistance provides faster switching response. Active product.
DDTC143TCA-7-F: 4.7 kOhm base resistor (vs. 10 kOhm). Intermediate base resistance. Active product with highest inventory (271,400 units).
DDTC124TCA-7-F: 22 kOhm base resistor (vs. 10 kOhm). Higher base resistance reduces base current requirements. Active product.
DDTC114GCA-7-F: 10 kOhm emitter-base resistor (R2 configuration). DC current gain reduced to 30 @ 5mA, 5V. Active product.
DDTC115GCA-7-F: 100 kOhm emitter-base resistor (R2 configuration). DC current gain 82 @ 5mA, 5V. Active product with high inventory (60,200 units).
DDTC144GCA-7-F: 47 kOhm emitter-base resistor (R2 configuration). DC current gain 68 @ 5mA, 5V. Active product.

Obsolete Parts (Not Recommended):

DDTC125TCA-7-F: Classified as obsolete. Avoid for new designs despite available inventory (17,100 units).

Frequently Asked Questions (FAQ)

Q: Can I substitute DDTC114TCA-7-F directly for DTC114TCA-TP without any circuit changes?

A: Yes. DDTC114TCA-7-F is a direct electrical equivalent with identical collector current (100 mA), breakdown voltage (50 V), base resistor (10 kOhms), DC current gain (100 @ 1mA, 5V), and transition frequency (250 MHz). The only differences are manufacturer (Diodes Incorporated vs. Micro Commercial Co) and packaging format. Both are active products with ROHS3 compliance.

Q: What is the difference between DTC114TKAT146 and DTC114TCAT116?

A: Both are manufactured by Rohm Semiconductor and are electrically identical to DTC114TCA-TP. The difference is in the supplier device package designation: DTC114TKAT146 uses SMT3 package format, while DTC114TCAT116 uses SST3 package format. Both are supplied in Cut Tape & Digi-Reel format. DTC114TKAT146 has significantly higher inventory availability (186,620 units vs. 3,112 units).

Q: Can I use DDTC143TCA-7-F as a substitute for DTC114TCA-TP?

A: DDTC143TCA-7-F is functionally similar but not a direct substitute. It has a 4.7 kOhm base resistor instead of 10 kOhms. This lower resistance value will result in different base current requirements and switching characteristics. Circuit-level evaluation is required to determine compatibility with your specific application.

Q: What does the "R1" and "R2" designation mean in the resistor columns?

A: R1 refers to the base resistor (connected between base and ground in the pre-biased configuration). R2 refers to the emitter-base resistor (connected between emitter and base). Different resistor configurations produce different biasing characteristics and current gain behavior. Parts with R1 configuration are generally more suitable for switching applications, while R2 configurations provide different biasing stability.

Q: Why is DDTC125TCA-7-F marked as obsolete?

A: DDTC125TCA-7-F is classified as obsolete by the manufacturer. Although inventory is currently available (17,100 units), this part should not be selected for new designs as it may become unavailable in the future. Use active alternatives such as DDTC114TCA-7-F or DTC114TKAT146 instead.

Q: Are all these parts RoHS compliant?

A: Yes. All listed parts, including the main part DTC114TCA-TP and all direct and similar substitutes, are ROHS3 compliant. All parts also have MSL 1 (unlimited moisture sensitivity level) and REACH unaffected status.

Q: What is the difference between SOT-23, SOT-23-3, SST3, and SMT3 package designations?

A: These are different supplier and manufacturer package designations for the same physical TO-236-3 / SC-59 three-lead surface mount package. SOT-23 and SOT-23-3 are standard designations used by different manufacturers. SST3 and SMT3 are alternative designations used by Rohm Semiconductor. All are mechanically and electrically compatible in the same PCB footprint.

Q: If I need faster switching response, which substitute should I use?

A: DDTC123TCA-7-F features a 2.2 kOhm base resistor (vs. 10 kOhm in DTC114TCA-TP), which provides lower base resistance and faster switching response. However, this requires circuit-level verification to ensure base current drive capability is adequate for your application.

Q: Can I use DDTC115GCA-7-F as a drop-in replacement?

A: DDTC115GCA-7-F is not a drop-in replacement. It uses a 100 kOhm emitter-base resistor (R2 configuration) with DC current gain of 82 @ 5mA, 5V, compared to the 10 kOhm base resistor (R1 configuration) and 100 @ 1mA, 5V gain of DTC114TCA-TP. Circuit evaluation is required before substitution.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message