Equivalent & Substitute Parts for DTA143TCAT116

Part Overview

DTA143TCAT116 is a pre-biased PNP bipolar junction transistor (BJT) manufactured by Rohm Semiconductor. This device features a maximum collector current of 100 mA, a collector-emitter breakdown voltage of 50 V, and a base resistor of 4.7 kOhms. It is provided in a surface-mount TO-236-3 (SOT-23-3, SC-59) package and has a power rating of 200 mW. The part is currently active and compliant with RoHS3, REACH, and has an unlimited Moisture Sensitivity Level (MSL 1).

Finding alternative or substitute models is necessary to ensure continuity of supply, maintain design compatibility, and support multi-source qualification for this product category, especially when inventory management, lead time, or procurement risk are critical.

Substiute Parts

DTA143TCAT116

Rohm SemiconductorIn Stock: 1145DTA143TCAT116 Datasheet

Current PartRFQ

MMUN2116LT1G

onsemiIn Stock: 23892MMUN2116LT1G Datasheet

SimilarRFQ

PDTA143TT,215

NXP SemiconductorsIn Stock: 206909PDTA143TT,215 Datasheet

SimilarRFQ

SMMUN2116LT1G

onsemiIn Stock: 59241SMMUN2116LT1G Datasheet

SimilarRFQ

SMMUN2116LT3G

onsemiIn Stock: 909SMMUN2116LT3G Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts are selected strictly according to electrical and mechanical parameters provided for this category. The matching process is based on the following key substitution criteria:

• Transistor type: PNP, Pre-Biased.
• Maximum collector current: 100 mA.
• Collector-emitter breakdown voltage: 50 V.
• Base resistor value: 4.7 kOhms.
• Maximum collector cutoff current: 500 nA.
• Maximum power rating: ≥ 200 mW.
• Mounting type: surface mount.
• Package: TO-236-3, SOT-23-3, SC-59.
• Compliance status: RoHS3, REACH, MSL 1.

Parameter Comparison

Engineering Selection Recommendations

All listed substitute options (excluding incomplete parameter entries) match the mandatory product status (active or last time buy), compliance requirements (RoHS3 Compliant, REACH Unaffected, MSL 1), and are available in compatible surface mount packages. For selection, ensure substitute parts meet inventory and procurement plans within the compliance and certification statuses as specified.

Frequently Asked Questions (FAQ)

Q1. What are the most important substitution criteria for DTA143TCAT116?
The primary substitution criteria include transistor type (PNP, pre-biased), collector current (100 mA), breakdown voltage (50 V), base resistor value (4.7 kOhms), package type (TO-236-3, SOT-23-3, SC-59), mounting method (surface mount), RoHS3 compliance, REACH status, and Moisture Sensitivity Level (1).

Q2. How do the substitute parts compare in terms of electrical and mechanical compatibility?
Substitute parts such as MMUN2116LT1G, SMMUN2116LT1G, and SMMUN2116LT3G from onsemi match all key parameters including collector current, breakdown voltage, base resistor value, mounting type, and package. All listed substitutes are surface mount, provided in TO-236-3/SOT-23-3/SC-59 packages.

Q3. Are there package variations to consider among substitute parts?
All substitutes with complete parameters utilize surface mount TO-236-3 (SOT-23-3, SC-59) packages, ensuring consistent board compatibility with DTA143TCAT116.

Q4. What compliance certifications must be verified when selecting a substitute?
Selections must maintain RoHS3 compliance, REACH Unaffected status, and Moisture Sensitivity Level (MSL 1), as provided in the input parameters.

Q5. Is last time buy status a concern for any listed substitutes?
SMMUN2116LT3G from onsemi is designated as last time buy. Multi-source planning may require evaluating long-term availability based on current inventory.