DT04-3P-C008 Equivalent & Substitute Parts

Part Overview

The DT04-3P-C008 is a 3-position rectangular connector receptacle housing manufactured by TE Connectivity Deutsch Connectors. This component is classified as an obsolete product, indicating it is no longer in active production. The housing is designed for free-hanging, in-line mounting applications with crimp-type contact termination and latch holder fastening. Due to its obsolete status, identification of active equivalent parts is necessary to support ongoing system maintenance, repair, and new design implementations where this connector type is required.

Substiute Parts

DT04-3P-C008

TE Connectivity Deutsch ConnectorsIn Stock: 1178DT04-3P-C008 Datasheet

Current PartRFQ

DT04-3P-C015

TE Connectivity Deutsch ConnectorsIn Stock: 1268DT04-3P-C015 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the DT04-3P-C008 is determined by strict equivalence across the following critical parameters:

Primary Equivalence Criteria:

• Connector Type: Receptacle
• Contact Type: Male Pin
• Number of Positions: 3
• Number of Rows: 2
• Mounting Type: Free Hanging (In-Line)
• Contact Termination: Crimp
• Fastening Type: Latch Holder
• Color: Gray
• Operating Temperature Range: -55°C to 125°C
• Series: DT (TE Connectivity Deutsch Connectors)

Secondary Compatibility Factors:

• Insulation Material composition (Plastic or Polyamide-based variants)
• Environmental protection ratings (IP68, IP6K9K)
• Base product number alignment (DT04)

The substitute part DT04-3P-C015 maintains full equivalence across all primary criteria while offering active product status and enhanced material specifications. This part is suitable for direct replacement in applications where the DT04-3P-C008 was originally specified.

Parameter Comparison

Engineering Selection Recommendations

The DT04-3P-C015 is the direct active equivalent for the obsolete DT04-3P-C008. Selection of this substitute part is based on the following engineering factors:

Product Status Alignment: The DT04-3P-C015 maintains active product status with TE Connectivity Deutsch Connectors, ensuring continued availability, technical support, and supply chain reliability. The DT04-3P-C008, classified as obsolete, presents supply and long-term support constraints.

Functional Equivalence: All critical electrical and mechanical parameters are identical between the two parts, including connector type, contact configuration, mounting method, termination type, and operating temperature range. This ensures direct functional compatibility in existing applications.

Material and Compliance Enhancement: The DT04-3P-C015 specifies polyamide (PA) nylon with glass-filled composition for the insulation material, compared to the generic plastic specification of the DT04-3P-C008. The substitute part carries ROHS3 compliance certification, meeting current regulatory requirements for electronic component manufacturing and distribution.

Environmental Protection: Both parts maintain identical IP68 and IP6K9K environmental protection ratings, confirming equivalent performance in sealed and high-pressure wash applications.

For new designs, system upgrades, or replacement scenarios, the DT04-3P-C015 is the appropriate selection. For legacy system maintenance requiring exact historical specifications, the DT04-3P-C008 remains functionally equivalent where inventory is available.

Frequently Asked Questions (FAQ)

Q: Can the DT04-3P-C015 be used as a direct replacement for the DT04-3P-C008 in existing assemblies?

A: Yes. The DT04-3P-C015 is functionally equivalent across all critical parameters: connector type, contact configuration, number of positions, mounting method, contact termination, fastening mechanism, color, and operating temperature range. Direct substitution is supported without design modification.

Q: What is the primary difference between these two parts?

A: The DT04-3P-C008 is obsolete, while the DT04-3P-C015 is an active product. The DT04-3P-C015 features enhanced insulation material (polyamide nylon, glass-filled) and carries ROHS3 compliance certification. Functionally, both parts are equivalent.

Q: Are the packaging formats different between these parts?

A: Yes. The DT04-3P-C008 packaging is not specified in available documentation. The DT04-3P-C015 is supplied in bulk packaging. Confirm packaging requirements with your procurement department when transitioning between these parts.

Q: Do both parts require separate contact components?

A: Yes. Both the DT04-3P-C008 and DT04-3P-C015 are housings only. Contacts are not included and must be sourced separately. Ensure contact specifications match the housing requirements for your application.

Q: What environmental protection do these connectors provide?

A: Both parts provide IP68 and IP6K9K environmental protection ratings, indicating sealed operation and resistance to high-pressure water jets. These ratings are identical between the two parts.

Q: Is the DT04-3P-C015 suitable for the same temperature range as the DT04-3P-C008?

A: Yes. Both parts operate across the identical temperature range of -55°C to 125°C. No thermal performance differences exist between the two parts.

Q: What compliance certifications apply to the DT04-3P-C015?

A: The DT04-3P-C015 carries ROHS3 compliance certification and is REACH unaffected. The DT04-3P-C008 compliance status is not specified in available documentation.