DSS2-60AT2AP Equivalent & Substitute Parts

Part Overview

The DSS2-60AT2AP is a Schottky diode manufactured by IXYS, rated for 60 V DC reverse voltage and 2 A average rectified current in a through-hole TO-92-3 package. This component is classified as obsolete, necessitating identification of active equivalent parts for ongoing design support and procurement continuity. Schottky diodes in this voltage and current class are commonly used in power supply circuits, rectification applications, and switching circuits where fast recovery characteristics are required.

Substiute Parts

DSS2-60AT2AP

IXYSIn Stock: 690DSS2-60AT2AP Datasheet

Current PartRFQ

DSS2-60AT2

IXYSIn Stock: 1119DSS2-60AT2 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the DSS2-60AT2AP is determined by electrical and mechanical parameter equivalence across the following criteria:

Electrical Parameters:

• Voltage - DC Reverse (Vr) (Max): 60 V
• Current - Average Rectified (Io): 2 A
• Technology: Schottky
• Speed: Fast Recovery ≤ 500ns, > 200mA (Io)

Mechanical Parameters:

• Mounting Type: Through Hole
• Package / Case: TO-226-3, TO-92-3 (TO-226AA)

Environmental Parameters:

• Operating Temperature - Junction: -40°C ~ 175°C
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

Parts meeting all these parameters are classified as direct equivalents and may be substituted without circuit redesign.

Parameter Comparison

Engineering Selection Recommendations

The DSS2-60AT2 is the direct equivalent substitute for the obsolete DSS2-60AT2AP. Both parts are manufactured by IXYS and share identical electrical specifications, mechanical packaging, and environmental operating parameters. The primary distinction is product status: DSS2-60AT2AP is obsolete while DSS2-60AT2 maintains active production status.

For new designs and procurement of replacement components, the DSS2-60AT2 is the appropriate selection. This part maintains REACH Unaffected status and EAR99 export classification, consistent with the original part. The active product status ensures ongoing availability and supply chain continuity.

Both parts are classified as ROHS3 Compliant or REACH Unaffected, confirming regulatory alignment for applications requiring environmental compliance documentation.

Frequently Asked Questions (FAQ)

Q: Can DSS2-60AT2 be used as a direct replacement for DSS2-60AT2AP in existing circuits?

A: Yes. The DSS2-60AT2 is electrically and mechanically equivalent to the DSS2-60AT2AP. All critical parameters including voltage rating, current capacity, recovery speed, package type, and operating temperature range are identical. No circuit modifications are required.

Q: What is the primary reason for substitution?

A: The DSS2-60AT2AP is classified as obsolete. The DSS2-60AT2 is the active equivalent part from the same manufacturer, ensuring continued component availability and supply chain support.

Q: Are the package dimensions identical between these parts?

A: Yes. Both parts use the TO-92-3 package (TO-226-3, TO-226AA designation). Physical dimensions and pin configurations are identical, permitting direct board-level substitution.

Q: Do both parts meet the same regulatory requirements?

A: Yes. Both parts maintain REACH Unaffected status, EAR99 export classification, and equivalent moisture sensitivity levels (MSL 1 - Unlimited). Regulatory compliance documentation is consistent between the two parts.

Q: What is the operating temperature range for both parts?

A: Both the DSS2-60AT2AP and DSS2-60AT2 operate across a junction temperature range of -40°C to 175°C, supporting applications across industrial, commercial, and consumer temperature environments.

Q: Are there any differences in electrical performance between these parts?

A: No. Both parts are Schottky diodes with identical 60 V reverse voltage rating, 2 A average rectified current capacity, and fast recovery characteristics (≤ 500ns, > 200mA). Electrical performance is equivalent.