DSPIC30F1010T-30I/MM Equivalent & Substitute Parts

Part Overview

The DSPIC30F1010T-30I/MM is a 16-bit dsPIC microcontroller from Microchip Technology's dsPIC 30F series, designed for embedded applications requiring digital signal processing capabilities. This device integrates 6KB of FLASH program memory, 256 bytes of RAM, and operates at 30 MIPs with a supply voltage range of 3V to 5.5V. The part is currently classified as obsolete, making identification of suitable substitute components essential for ongoing system support and new design implementations.

Substiute Parts

DSPIC30F1010T-30I/MM

Microchip TechnologyIn Stock: 925DSPIC30F1010T-30I/MM Datasheet

Current PartRFQ

DSPIC30F1010-30I/MM

Microchip TechnologyIn Stock: 885DSPIC30F1010-30I/MM Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the DSPIC30F1010T-30I/MM is determined by strict equivalence across the following critical parameters:

• Core Architecture: dsPIC 16-bit processor
• Processing Speed: 30 MIPs minimum
• Program Memory: 6KB (2K x 24) FLASH
• RAM Configuration: 256 x 8 bytes
• Supply Voltage Range: 3V ~ 5.5V
• I/O Count: 21 pins
• Connectivity Interfaces: I2C, IrDA, LINbus, SPI, UART/USART
• Peripheral Set: Brown-out Detect/Reset, POR, PWM, WDT
• Data Conversion: A/D 6x10b
• Package Format: 28-VQFN Exposed Pad (28-QFN-S 6x6)
• Temperature Range: -40°C ~ 85°C

The DSPIC30F1010-30I/MM qualifies as a direct substitute based on identical electrical specifications, memory configuration, peripheral integration, and physical packaging.

Parameter Comparison

Engineering Selection Recommendations

The DSPIC30F1010-30I/MM is the appropriate substitute for the obsolete DSPIC30F1010T-30I/MM. Both components maintain identical electrical and functional specifications across all critical parameters. The substitute part carries Active product status from Microchip Technology, ensuring continued availability and manufacturing support. Both variants maintain ROHS3 compliance and REACH unaffected status, satisfying regulatory requirements for new designs and legacy system replacements. The substitute is available in Tube packaging, providing standard component handling and storage conditions suitable for production environments.

Frequently Asked Questions (FAQ)

Q: Are DSPIC30F1010T-30I/MM and DSPIC30F1010-30I/MM pin-for-pin compatible?

A: Yes. Both components use the 28-VQFN Exposed Pad package with identical pinout, electrical characteristics, and functional specifications. Direct PCB-level substitution is supported without design modification.

Q: What is the primary difference between these two part numbers?

A: The main difference is product status. The DSPIC30F1010T-30I/MM is classified as obsolete, while the DSPIC30F1010-30I/MM maintains Active status with ongoing manufacturing support from Microchip Technology.

Q: Can the substitute part be used in existing designs originally specified for the main part?

A: Yes. Identical core processor architecture, memory configuration, peripheral integration, voltage specifications, and package format ensure functional equivalence in all applications.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts maintain ROHS3 compliance, REACH unaffected status, and MSL 1 (Unlimited) moisture sensitivity rating.

Q: What packaging options are available for each part?

A: The main part (DSPIC30F1010T-30I/MM) does not specify packaging format in the provided data. The substitute part (DSPIC30F1010-30I/MM) is available in Tube packaging.