DSC7102S0L Equivalent & Substitute Parts

Part Overview

The DSC7102S0L is a Panasonic Electronic Components NPN bipolar junction transistor rated for 80 V collector-emitter breakdown voltage and 1 A maximum collector current. This surface mount device in MiniP3-F2-B packaging is designed for general-purpose switching and amplification applications. The part is discontinued at DiGi Electronics, necessitating identification of functionally equivalent alternatives that meet the same electrical and mechanical specifications.

Key Parameters

Parameter	Value
Transistor Type	NPN
Voltage - Collector Emitter Breakdown (Max)	80 V
Current - Collector (Ic) (Max)	1 A
Power - Max	1 W
Frequency - Transition	180 MHz
Mounting Type	Surface Mount
Package / Case	TO-243AA
Operating Temperature (TJ)	150°C
RoHS Status	RoHS Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)

Substitute Part Grouping Explanation

Substitution of the DSC7102S0L is determined by the following critical parameters:

Mandatory Matching Criteria:

Transistor Type: NPN
Voltage - Collector Emitter Breakdown (Max): 80 V minimum
Current - Collector (Ic) (Max): 1 A minimum
Mounting Type: Surface Mount
Package / Case: TO-243AA
Operating Temperature (TJ): 150°C maximum

Allowable Parameter Variations: Substitute parts may exceed the main part specifications in the following areas without compromising circuit compatibility:

Current - Collector (Ic) (Max): Higher ratings are acceptable
Power - Max: Higher ratings are acceptable
Frequency - Transition: Higher ratings are acceptable
Voltage - Collector Emitter Breakdown (Max): Higher ratings are acceptable

The identified substitute parts meet or exceed the electrical requirements of the DSC7102S0L while maintaining surface mount compatibility and the TO-243AA package footprint.

Parameter Comparison

Parameter	DSC7102S0L	2SCR554P5T100	2SCR554PHZGT100	2SD1898T100R	NSS1C201LT1G
Manufacturer	Panasonic Electronic Components	Rohm Semiconductor	Rohm Semiconductor	Rohm Semiconductor	onsemi
Transistor Type	NPN	NPN	NPN	NPN	NPN
Voltage - Collector Emitter Breakdown (Max)	80 V	80 V	80 V	80 V	100 V
Current - Collector (Ic) (Max)	1 A	1.5 A	1.5 A	1 A	2 A
Power - Max	1 W	500 mW	500 mW	2 W	490 mW
Frequency - Transition	180 MHz	300 MHz	300 MHz	100 MHz	110 MHz
Operating Temperature (TJ)	150°C	150°C	150°C	150°C	-55°C ~ 150°C
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount
Package / Case	TO-243AA	TO-243AA	TO-243AA	TO-243AA	TO-236-3, SC-59, SOT-23-3
RoHS Status	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Product Status	Discontinued at DiGi Electronics	Active	Active	Not For New Designs	Active

Engineering Selection Recommendations

Primary Substitutes (Active Product Status):

The 2SCR554P5T100 and 2SCR554PHZGT100 are the preferred substitutes for the DSC7102S0L. Both parts are manufactured by Rohm Semiconductor and maintain active product status. These devices exceed the collector current rating (1.5 A vs. 1 A) and transition frequency (300 MHz vs. 180 MHz) of the original part while maintaining the 80 V breakdown voltage specification. Both are ROHS3 compliant with MSL 1 rating. The 2SCR554PHZGT100 carries AEC-Q101 automotive qualification, suitable for applications requiring automotive-grade reliability.

Secondary Substitute (Limited Lifecycle):

The 2SD1898T100R is a Rohm Semiconductor device with active collector current matching (1 A) and higher power dissipation capability (2 W vs. 1 W). However, this part carries "Not For New Designs" status, limiting its suitability for new product development. The transition frequency is lower (100 MHz vs. 180 MHz), which may impact high-frequency applications.

Alternative Substitute (Different Package):

The NSS1C201LT1G from onsemi provides the highest current rating (2 A) and voltage rating (100 V) among the substitutes. This part is active and ROHS3 compliant. However, it uses SOT-23-3 (TO-236) packaging rather than the TO-243AA footprint of the original part, requiring PCB layout modification. This device is suitable only when package change is acceptable.

Frequently Asked Questions (FAQ)

Q: Can the 2SCR554P5T100 directly replace the DSC7102S0L without circuit modification?

A: Yes. The 2SCR554P5T100 meets or exceeds all critical electrical parameters of the DSC7102S0L. Both devices use TO-243AA packaging and surface mount technology, enabling direct PCB footprint compatibility. The higher collector current (1.5 A vs. 1 A) and transition frequency (300 MHz vs. 180 MHz) provide additional design margin.

Q: What is the difference between 2SCR554P5T100 and 2SCR554PHZGT100?

A: Both parts are electrically identical Rohm Semiconductor NPN transistors with 80 V breakdown voltage and 1.5 A collector current. The primary difference is packaging format: 2SCR554P5T100 is supplied in Cut Tape (CT) & Digi-Reel format, while 2SCR554PHZGT100 is supplied in Tape & Reel (TR) format. The 2SCR554PHZGT100 carries AEC-Q101 automotive qualification, making it suitable for automotive applications.

Q: Why is the 2SD1898T100R marked "Not For New Designs"?

A: The "Not For New Designs" status indicates that Rohm Semiconductor has designated this part for legacy support only. While the part remains available in inventory (180,400 pcs), it is not recommended for incorporation into new product designs. New designs should utilize the 2SCR554P5T100 or 2SCR554PHZGT100 instead.

Q: Can the NSS1C201LT1G be used as a substitute despite different packaging?

A: The NSS1C201LT1G can be used only if PCB layout modification is acceptable. This onsemi device uses SOT-23-3 (TO-236) packaging instead of the TO-243AA footprint of the DSC7102S0L. The electrical specifications exceed the original part requirements (100 V breakdown, 2 A collector current). Footprint change requires PCB redesign and re-qualification.

Q: Are all substitute parts RoHS compliant?

A: Yes. All identified substitute parts carry ROHS3 compliance status, meeting current environmental and hazardous substance restrictions. The original DSC7102S0L carries RoHS Compliant status. All parts maintain MSL 1 (Unlimited) moisture sensitivity rating.

Q: What is the impact of higher transition frequency in substitute parts?

A: The 2SCR554P5T100 and 2SCR554PHZGT100 offer 300 MHz transition frequency compared to the DSC7102S0L's 180 MHz. Higher transition frequency indicates faster switching capability and improved high-frequency performance. This specification increase does not create compatibility issues in applications designed for the original 180 MHz part; it provides additional performance margin.

Q: Which substitute is recommended for automotive applications?

A: The 2SCR554PHZGT100 is the recommended choice for automotive applications. This Rohm Semiconductor device carries AEC-Q101 qualification, indicating compliance with automotive reliability and quality standards. It maintains electrical equivalence to the DSC7102S0L while providing automotive-grade assurance.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message