DSC700300L Equivalent & Substitute Parts

Part Overview

The DSC700300L is a Bipolar (BJT) NPN transistor manufactured by Panasonic Electronic Components, rated for 50V collector-emitter breakdown voltage and 1A maximum collector current. This surface mount device in MiniP3-F2-B packaging is designed for general-purpose switching and amplification applications requiring 1W power dissipation and 170MHz transition frequency. The part is discontinued at DiGi Electronics, necessitating identification of functionally equivalent alternatives from active product lines that maintain electrical and mechanical compatibility within specified parameter ranges.

Key Parameters

Parameter	Value	Unit
Transistor Type	NPN	—
Voltage - Collector Emitter Breakdown (Max)	50	V
Current - Collector (Ic) (Max)	1	A
Power - Max	1	W
Frequency - Transition	170	MHz
Vce Saturation (Max) @ Ib, Ic	400mV @ 50mA, 500mA	—
DC Current Gain (hFE) (Min) @ Ic, Vce	120 @ 500mA, 10V	—
Operating Temperature (TJ)	150	°C
Mounting Type	Surface Mount	—
Package / Case	TO-243AA	—
Moisture Sensitivity Level (MSL)	1 (Unlimited)	—
RoHS Status	RoHS Compliant	—

Substitute Part Grouping Explanation

Substitution of the DSC700300L is determined by strict electrical and mechanical compatibility within the following criteria:

Primary Substitution Parameters:

Transistor Type: NPN (required match)
Voltage - Collector Emitter Breakdown: minimum 50V (equal or greater)
Current - Collector (Ic) (Max): minimum 1A (equal or greater)
Mounting Type: Surface Mount (required match)
Package / Case: TO-243AA (required match)
Operating Temperature: 150°C maximum junction temperature (equal or greater)
Moisture Sensitivity Level: MSL 1 (required match)

Secondary Compatibility Parameters:

Power dissipation capability: 1W or greater
Frequency - Transition: 170MHz or greater
Vce Saturation characteristics within acceptable operating ranges
DC Current Gain (hFE) sufficient for intended application

Substitute parts are grouped into two categories based on voltage rating alignment:

Group 1: 50V Rated Devices — Direct electrical equivalents with identical voltage specifications

2SCR513P5T100 (Rohm Semiconductor)
2SCR513PFRAT100 (Rohm Semiconductor)
2SCR513PHZGT100 (Rohm Semiconductor)

Group 2: 45V Rated Devices — Functionally compatible for applications not requiring full 50V margin

BCX54,115 (NXP Semiconductors)
BCX54-16,135 (Nexperia USA Inc.)
BCX5416TA (Diodes Incorporated)

Group 3: 60V Rated Devices — Enhanced voltage capability for higher-stress applications

BCX5516H6433XTMA1 (Infineon Technologies)
BCX5516TA (Diodes Incorporated)

Group 4: 40V Rated Devices — Lower voltage rating, suitable only for applications with reduced voltage requirements

FCX491ATA (Diodes Incorporated)

Parameter Comparison

Part Number	Manufacturer	Vce(BR) Max (V)	Ic Max (A)	Power Max (W)	fT (MHz)	Package	Product Status	RoHS Status
DSC700300L	Panasonic	50	1	1	170	TO-243AA	Discontinued	RoHS Compliant
2SCR513P5T100	Rohm Semiconductor	50	1	0.5	360	TO-243AA	Active	ROHS3 Compliant
2SCR513PFRAT100	Rohm Semiconductor	50	1	0.5	360	TO-243AA	Active	ROHS3 Compliant
2SCR513PHZGT100	Rohm Semiconductor	50	1	0.5	360	TO-243AA	Active	ROHS3 Compliant
BCX54,115	NXP Semiconductors	45	1	1.25	180	TO-243AA	Active	Not specified
BCX54-16,135	Nexperia USA Inc.	45	1	1.25	180	TO-243AA	Active	ROHS3 Compliant
BCX5416TA	Diodes Incorporated	45	1	1	150	TO-243AA	Active	ROHS3 Compliant
BCX5516H6433XTMA1	Infineon Technologies	60	1	2	100	TO-243AA	Last Time Buy	ROHS3 Compliant
BCX5516TA	Diodes Incorporated	60	1	1	150	TO-243AA	Active	ROHS3 Compliant
FCX491ATA	Diodes Incorporated	40	1	1	150	TO-243AA	Active	ROHS3 Compliant

Engineering Selection Recommendations

Primary Recommendation: 2SCR513P5T100 or 2SCR513PFRAT100

These Rohm Semiconductor devices provide exact voltage rating match (50V) with the DSC700300L and are in active production status. Both parts maintain TO-243AA packaging and MSL 1 moisture sensitivity rating. The 2SCR513PFRAT100 variant includes AEC-Q101 automotive qualification, suitable for applications requiring automotive-grade reliability. Higher transition frequency (360MHz) provides performance margin beyond the original 170MHz specification. Power dissipation is reduced to 500mW; applications requiring full 1W dissipation should be evaluated for thermal margin.

Secondary Recommendation: BCX5416TA or BCX54-16,135

These NXP/Nexperia devices operate at 45V rating, representing a 10% reduction from the original 50V specification. Both are in active production with ROHS3 compliance. BCX5416TA (Diodes Incorporated) offers extended operating temperature range (-65°C to 150°C) and is available in Cut Tape & Digi-Reel packaging. BCX54-16,135 (Nexperia) provides higher power dissipation (1.25W) and is available in Tape & Reel format. These substitutes are suitable for applications where 45V collector-emitter breakdown voltage is acceptable.

Tertiary Recommendation: BCX5516TA

This Diodes Incorporated device provides enhanced voltage rating (60V) with active product status and ROHS3 compliance. Suitable for applications requiring higher voltage margin or operating in elevated voltage environments. Extended operating temperature range (-65°C to 150°C) provides thermal flexibility.

Not Recommended: FCX491ATA

The 40V rating falls below the original 50V specification and is suitable only for applications explicitly designed for lower voltage operation.

Not Recommended: BCX5516H6433XTMA1

This Infineon device carries Last Time Buy status, indicating end-of-life production phase. While AEC-Q101 qualified, the declining availability and lower transition frequency (100MHz) make it unsuitable for new designs requiring long-term supply continuity.

Frequently Asked Questions (FAQ)

Q: Can the 2SCR513P5T100 replace the DSC700300L in all applications?

A: The 2SCR513P5T100 matches the critical electrical parameters (50V, 1A, NPN, TO-243AA package) and is in active production. However, power dissipation is reduced from 1W to 500mW. Applications operating near the 1W thermal limit require thermal analysis to confirm adequate margin at 500mW rating.

Q: What is the difference between 2SCR513P5T100, 2SCR513PFRAT100, and 2SCR513PHZGT100?

A: All three are Rohm Semiconductor 50V, 1A NPN transistors in TO-243AA packaging with identical electrical specifications. Differences are in packaging format (Cut Tape vs. Tape & Reel) and qualification level. The PFRAT variant includes AEC-Q101 automotive qualification; the PHZGT variant is supplied in Tape & Reel format. Selection depends on procurement format and application requirements.

Q: Why do some substitutes have lower voltage ratings (45V) than the original (50V)?

A: The BCX54 series from NXP/Nexperia operates at 45V maximum collector-emitter breakdown voltage. This represents a 10% reduction from the original specification. These devices are suitable for applications where the circuit design includes adequate voltage margin or where the actual operating voltage is below 45V. Applications requiring the full 50V rating should use the 2SCR513 series or BCX5516 series.

Q: Is the BCX5516H6433XTMA1 a suitable long-term replacement?

A: The BCX5516H6433XTMA1 carries Last Time Buy status, indicating Infineon has discontinued production and existing inventory is being depleted. While the device meets electrical requirements and includes AEC-Q101 qualification, it is not suitable for new designs requiring long-term supply continuity. Active alternatives such as BCX5516TA (Diodes Incorporated) or 2SCR513P5T100 (Rohm Semiconductor) are preferred.

Q: What packaging formats are available for the substitute parts?

A: Substitute parts are available in multiple packaging formats: Cut Tape (CT) & Digi-Reel, Cut Tape (CT), Tape & Reel (TR), and Bulk. All maintain the TO-243AA case outline and MiniP3/MPT3/SOT-89 supplier device packages. Selection of packaging format depends on procurement volume and assembly process requirements.

Q: Are all substitute parts RoHS compliant?

A: The original DSC700300L is RoHS Compliant. All recommended substitute parts carry ROHS3 Compliant status, which supersedes the original RoHS standard and includes additional restricted substances. This ensures environmental and regulatory compliance for new designs.

Q: Can the FCX491ATA be used as a substitute?

A: The FCX491ATA operates at 40V maximum collector-emitter breakdown voltage, which is 10V below the original 50V specification. This device is suitable only for applications explicitly designed for 40V operation or where the actual circuit voltage is confirmed to remain below 40V. For applications requiring the full 50V rating, use the 2SCR513 series or higher-rated alternatives.

Q: What is the significance of the transition frequency (fT) difference?

A: The original DSC700300L specifies 170MHz transition frequency. Substitute parts offer varying fT values: 2SCR513 series at 360MHz, BCX54 series at 180MHz, BCX5516 series at 150MHz, and FCX491ATA at 150MHz. Higher transition frequency provides performance margin for high-speed switching applications. Lower fT values (150MHz) remain suitable for applications operating below 170MHz but should be evaluated for timing-critical circuits.

Q: What is the difference between the Panasonic MiniP3-F2-B package and the Rohm MPT3 package?

A: Both packages conform to the TO-243AA case outline and are mechanically compatible for surface mount assembly. The MiniP3-F2-B is Panasonic's designation; MPT3 is Rohm's designation for the same physical package. Electrical performance and thermal characteristics are equivalent within the TO-243AA standard.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message