DSC6001MA3B-PROGT Equivalent & Substitute Parts

Part Overview

The DSC6001MA3B-PROGT is a MEMS CMOS programmable oscillator manufactured by Microchip Technology. This XO (Standard) oscillator operates across a frequency range of 2 kHz to 80 MHz with user-programmable output, making it suitable for applications requiring flexible frequency selection. The device is actively produced and maintains full compliance with automotive-grade standards (AEC-Q100), RoHS3, and REACH regulations. Substitute parts are identified when inventory constraints or supply chain requirements necessitate alternative sourcing while maintaining electrical and mechanical compatibility.

Substiute Parts

DSC6001MA3B-PROGT

Microchip TechnologyIn Stock: 1507DSC6001MA3B-PROGT Datasheet

Current PartRFQ

DSC6003MA3B-PROGT

Microchip TechnologyIn Stock: 1774DSC6003MA3B-PROGT Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

The DSC6003MA3B-PROGT qualifies as a parametric equivalent to the DSC6001MA3B-PROGT based on the following substitution criteria:

Both parts share identical electrical specifications across all critical parameters: frequency range (2 kHz ~ 80 MHz), supply voltage (1.71V ~ 3.63V), frequency stability (±20ppm), operating temperature range (-40°C ~ 125°C), and maximum supply current (1.3mA Typ). Both devices feature CMOS output with Enable/Disable function and are user-programmable blank oscillators.

Mechanical compatibility is confirmed through identical package specifications: 4-VFLGA surface mount package with matching dimensions (0.079" L x 0.063" W / 2.00mm x 1.60mm) and seated height (0.035" / 0.89mm).

Compliance and regulatory status are equivalent: both parts carry AEC-Q100 automotive-grade ratings, ROHS3 compliance, REACH Unaffected status, and MSL 1 (Unlimited) moisture sensitivity level.

Both parts belong to the DSC60XXB series and maintain Active product status with full manufacturing support.

Parameter Comparison

Engineering Selection Recommendations

Both the DSC6001MA3B-PROGT and DSC6003MA3B-PROGT are suitable for direct substitution in applications requiring MEMS-based programmable oscillators. Selection between these parts should be based on inventory availability and supply chain considerations rather than electrical or mechanical performance differences.

The DSC6001MA3B-PROGT maintains 1431 pieces in current stock inventory. The DSC6003MA3B-PROGT provides an alternative with 1739 pieces available, offering enhanced supply availability.

Both parts maintain Active product status with full manufacturing support from Microchip Technology. Both carry identical compliance certifications: AEC-Q100 automotive-grade qualification, ROHS3 compliance, and REACH Unaffected status. These certifications confirm suitability for automotive and industrial applications requiring regulatory compliance.

The 4-VFLGA surface mount package ensures compatibility with standard PCB assembly processes. The MSL 1 (Unlimited) moisture sensitivity level indicates minimal handling restrictions during manufacturing and storage.

Frequently Asked Questions (FAQ)

Q: Can DSC6003MA3B-PROGT be used as a direct replacement for DSC6001MA3B-PROGT?

A: Yes. Both parts are parametric equivalents with identical electrical specifications, mechanical dimensions, package type, and compliance ratings. No circuit modifications are required for substitution.

Q: Are there any differences in frequency programming between these parts?

A: No. Both parts are user-programmable blank oscillators with identical frequency range (2 kHz ~ 80 MHz) and programming methodology. Programming procedures and output characteristics are equivalent.

Q: Do both parts support the same supply voltage range?

A: Yes. Both parts operate across 1.71V to 3.63V supply voltage range with identical frequency stability (±20ppm) and maximum supply current (1.3mA Typ) across the entire operating temperature range (-40°C ~ 125°C).

Q: Are the package dimensions identical?

A: Yes. Both parts use the 4-VFLGA surface mount package with matching dimensions of 0.079" L x 0.063" W (2.00mm x 1.60mm) and maximum seated height of 0.035" (0.89mm). PCB footprints are identical.

Q: What is the difference between DSC6001 and DSC6003 base product numbers?

A: The base product numbers (DSC6001 vs DSC6003) represent different part variants within the DSC60XXB series. Both variants meet identical electrical and mechanical specifications for this application category.

Q: Are both parts AEC-Q100 qualified?

A: Yes. Both DSC6001MA3B-PROGT and DSC6003MA3B-PROGT carry AEC-Q100 automotive-grade ratings, confirming suitability for automotive applications and environments.

Q: What is the moisture sensitivity level for these parts?

A: Both parts have MSL 1 (Unlimited) moisture sensitivity level, indicating minimal moisture-related handling restrictions during manufacturing, storage, and assembly processes.