DSC2P01R0L Equivalent & Substitute Parts

Part Overview

The DSC2P01R0L is an NPN Darlington bipolar junction transistor manufactured by Panasonic Electronic Components, rated for 50 V collector-emitter breakdown voltage and 500 mA maximum collector current. This surface mount device in Mini3-G3-B-B packaging is designed for general-purpose switching and amplification applications requiring moderate current handling and voltage ratings.

The DSC2P01R0L has been discontinued at DiGi Electronics. Equivalent and substitute parts are necessary to maintain design continuity, ensure component availability, and support ongoing production requirements. Suitable alternatives must maintain electrical compatibility across critical parameters including collector current rating, breakdown voltage, saturation characteristics, and DC current gain specifications.

Key Parameters

Parameter	DSC2P01R0L Value	Unit
Transistor Type	NPN - Darlington	—
Current - Collector (Ic) (Max)	500	mA
Voltage - Collector Emitter Breakdown (Max)	50	V
Vce Saturation (Max) @ Ib, Ic	2.5V @ 500µA, 500mA	V
Current - Collector Cutoff (Max)	100	nA
DC Current Gain (hFE) (Min) @ Ic, Vce	4000 @ 500mA, 10V	—
Power - Max	200	mW
Operating Temperature (TJ)	150	°C
Mounting Type	Surface Mount	—
Package / Case	TO-236-3, SC-59, SOT-23-3	—
RoHS Status	RoHS Compliant	—
Moisture Sensitivity Level (MSL)	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitute parts for the DSC2P01R0L are selected based on strict electrical and mechanical compatibility. The following parameters determine substitution eligibility:

Critical Parameters for Substitution:

Transistor Type: NPN - Darlington configuration
Current - Collector (Ic) (Max): Equal to or greater than 500 mA
Voltage - Collector Emitter Breakdown (Max): Equal to or greater than 50 V
Package / Case: TO-236-3, SC-59, or SOT-23-3 (surface mount compatibility)
Mounting Type: Surface Mount
Moisture Sensitivity Level: MSL 1 (Unlimited)

Secondary Compatibility Factors:

DC Current Gain (hFE): Minimum 4000 @ specified test conditions
Operating Temperature: Maximum 150°C (TJ)
RoHS Compliance: Required for environmental and regulatory compliance

All substitute parts listed maintain the NPN Darlington topology and surface mount form factor. Substitute parts with higher voltage ratings (60 V) and higher power dissipation ratings provide enhanced design margins while remaining electrically compatible with the original specification. Saturation voltage characteristics and collector cutoff current specifications are maintained across all substitutes.

Parameter Comparison

Parameter	DSC2P01R0L	BCV47,215	BCV47,235	BCV47E6327HTSA1	BCV47QTA	BCV47QTC	BCV47TA	BCV47TC	FMMT38CTA
Manufacturer	Panasonic	Nexperia	Nexperia	Infineon	Diodes Inc.	Diodes Inc.	Diodes Inc.	Diodes Inc.	Diodes Inc.
Transistor Type	NPN - Darlington	NPN - Darlington	NPN - Darlington	NPN - Darlington	NPN - Darlington	NPN - Darlington	NPN - Darlington	NPN - Darlington	NPN - Darlington
Current - Collector (Ic) (Max)	500 mA	500 mA	500 mA	500 mA	500 mA	500 mA	500 mA	500 mA	300 mA
Voltage - Collector Emitter Breakdown (Max)	50 V	60 V	60 V	60 V	60 V	60 V	60 V	60 V	60 V
Vce Saturation (Max) @ Ib, Ic	2.5V @ 500µA, 500mA	1V @ 100µA, 100mA	1V @ 100µA, 100mA	1V @ 100µA, 100mA	1V @ 100µA, 100mA	1V @ 100µA, 100mA	1V @ 100µA, 100mA	1V @ 100µA, 100mA	1.25V @ 8mA, 800mA
Current - Collector Cutoff (Max)	100 nA	100 nA	100 nA	100 nA	100 nA	100 nA	100 nA	—	100 nA
DC Current Gain (hFE) (Min) @ Ic, Vce	4000 @ 500mA, 10V	10000 @ 100mA, 5V	10000 @ 100mA, 5V	10000 @ 100mA, 5V	10000 @ 100mA, 5V	10000 @ 100mA, 5V	10000 @ 100mA, 5V	10000 @ 100mA, 5V	5000 @ 100mA, 5V
Power - Max	200 mW	250 mW	250 mW	360 mW	310 mW	310 mW	330 mW	330 mW	330 mW
Operating Temperature (TJ)	150°C	150°C	150°C	150°C	-55°C ~ 150°C	-55°C ~ 150°C	-55°C ~ 150°C	-55°C ~ 150°C	-55°C ~ 150°C
Package / Case	TO-236-3, SC-59, SOT-23-3	TO-236-3, SC-59, SOT-23-3	TO-236-3, SC-59, SOT-23-3	TO-236-3, SC-59, SOT-23-3	TO-236-3, SC-59, SOT-23-3	TO-236-3, SC-59, SOT-23-3	TO-236-3, SC-59, SOT-23-3	TO-236-3, SC-59, SOT-23-3	TO-236-3, SC-59, SOT-23-3
RoHS Status	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)	1 (Unlimited)
Product Status	Discontinued	Active	Active	Last Time Buy	Active	Active	Active	Active	Active

Engineering Selection Recommendations

Primary Substitutes (Highest Compatibility):

BCV47TC, BCV47TA, BCV47QTC, and BCV47QTA from Diodes Incorporated are the preferred substitutes for the DSC2P01R0L. These parts maintain full electrical compatibility with 500 mA collector current rating, 60 V breakdown voltage, and identical surface mount SOT-23-3 packaging. All four parts are currently in active production status with substantial inventory availability. These devices feature ROHS3 compliance and AEC-Q101 automotive qualification (BCV47QTC and BCV47QTA), providing enhanced reliability documentation.

Secondary Substitutes (Enhanced Performance):

BCV47,215 and BCV47,235 from Nexperia USA Inc. provide equivalent electrical performance with higher power dissipation ratings (250 mW versus 200 mW). Both parts are in active production status. BCV47,215 is supplied in Cut Tape and Digi-Reel packaging, while BCV47,235 is supplied in Tape & Reel format. Both include AEC-Q101 automotive qualification.

BCV47E6327HTSA1 from Infineon Technologies offers the highest power dissipation rating (360 mW) and is designated as Last Time Buy. This part remains suitable for applications requiring enhanced thermal performance margins.

Limited Substitution:

FMMT38CTA from Diodes Incorporated has a reduced maximum collector current rating of 300 mA compared to the 500 mA specification of the DSC2P01R0L. This part is suitable only for applications where the actual operating collector current does not exceed 300 mA. All other electrical parameters remain compatible.

Compliance and Availability:

All substitute parts maintain RoHS compliance and MSL 1 (Unlimited) moisture sensitivity rating. BCV47TC, BCV47TA, BCV47QTC, and BCV47QTA offer the most immediate availability with inventory levels exceeding 1,000 units. These parts are recommended for new designs and ongoing production support.

Frequently Asked Questions (FAQ)

Q: Can BCV47TC be used as a direct replacement for DSC2P01R0L?

A: Yes. BCV47TC maintains identical collector current (500 mA), exceeds the breakdown voltage requirement (60 V versus 50 V), and uses the same surface mount SOT-23-3 package. Both parts are NPN Darlington transistors with MSL 1 moisture sensitivity rating. Pin configuration and electrical behavior are compatible.

Q: What is the difference between BCV47,215 and BCV47,235?

A: Both parts are electrically identical BCV47 Darlington transistors from Nexperia with 60 V breakdown voltage and 500 mA collector current rating. The primary difference is packaging format: BCV47,215 is supplied in Cut Tape and Digi-Reel format, while BCV47,235 is supplied in Tape & Reel format. Selection depends on assembly line requirements and tape specifications.

Q: Why does FMMT38CTA have a lower collector current rating?

A: FMMT38CTA is rated for 300 mA maximum collector current, compared to 500 mA for the DSC2P01R0L. This part is suitable only for applications where actual operating collector current remains below 300 mA. The reduced current rating reflects different internal design specifications. Verify application requirements before selecting this substitute.

Q: Are all substitute parts automotive qualified?

A: BCV47QTC and BCV47QTA include AEC-Q101 automotive qualification. BCV47,215 and BCV47,235 from Nexperia also include AEC-Q101 qualification. BCV47TC and BCV47TA do not list automotive qualification. BCV47E6327HTSA1 from Infineon does not list automotive qualification. Verify automotive qualification requirements for your specific application.

Q: What is the significance of the higher power dissipation ratings in substitute parts?

A: Substitute parts including BCV47,215 (250 mW), BCV47E6327HTSA1 (360 mW), and BCV47TA/BCV47TC (330 mW) exceed the original 200 mW specification. Higher power dissipation ratings provide additional thermal margin and allow operation at higher ambient temperatures or with higher power levels without exceeding junction temperature limits. This represents an enhancement over the original specification.

Q: Can I use BCV47E6327HTSA1 if it is designated Last Time Buy?

A: BCV47E6327HTSA1 is electrically compatible and currently has 38,100 units in stock. Last Time Buy status indicates the manufacturer will not produce additional quantities after current inventory is depleted. This part is suitable for immediate use but should not be selected for long-term production programs. BCV47TC, BCV47TA, BCV47QTC, or BCV47QTA are recommended for ongoing production due to active status.

Q: Are the saturation voltage differences significant?

A: The DSC2P01R0L specifies 2.5 V saturation at 500µA base current and 500 mA collector current. Substitute parts specify 1 V saturation at 100µA base current and 100 mA collector current. These are measured at different operating points and cannot be directly compared. FMMT38CTA specifies 1.25 V at 8 mA base current and 800 mA collector current. Consult detailed datasheets for saturation characteristics at your specific operating conditions.

Q: Do all parts have the same pin configuration?

A: Yes. All substitute parts use the TO-236-3, SC-59, or SOT-23-3 surface mount package with identical three-pin configuration: Base, Collector, and Emitter. Physical footprint and pin assignment are compatible across all listed substitutes.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message