DSA2001S0L Equivalent & Substitute Parts

Part Overview

The DSA2001S0L is a PNP bipolar junction transistor manufactured by Panasonic Electronic Components, rated for 50V collector-emitter breakdown voltage and 100mA maximum collector current. This surface mount device in MINI3-G3-B packaging is designed for general-purpose switching and amplification applications. The part is discontinued at DiGi Electronics, making equivalent and substitute parts necessary for ongoing design support and procurement.

Key Parameters

Parameter	Value	Unit
Transistor Type	PNP	—
Collector Current (Max)	100	mA
Collector-Emitter Breakdown Voltage (Max)	50	V
Power Dissipation (Max)	200	mW
Transition Frequency	150	MHz
Operating Temperature (Max)	150	°C
Package Type	TO-236-3, SC-59, SOT-23-3	—
Mounting Type	Surface Mount	—
RoHS Status	ROHS3 Compliant	—

Substitute Part Grouping Explanation

Substitution of the DSA2001S0L is determined by the following critical parameters:

Electrical Compatibility Requirements:

Transistor type must be PNP
Collector-emitter breakdown voltage must be greater than or equal to 50V
Maximum collector current must be greater than or equal to 100mA
Power dissipation must be greater than or equal to 200mW
Operating temperature range must support 150°C maximum junction temperature

Mechanical Compatibility Requirements:

Package must be surface mount in TO-236-3, SC-59, or SOT-23-3 form factor
Pinout must be compatible with three-terminal configuration

Compliance Requirements:

RoHS3 compliance required
Moisture sensitivity level 1 (unlimited) preferred

Substitute parts are grouped into two categories based on electrical performance:

Category A (Full Electrical Equivalents): Parts meeting or exceeding all electrical parameters of the DSA2001S0L, including 50V breakdown voltage and 100mA collector current rating.

Category B (Reduced Voltage Equivalents): Parts with 45V breakdown voltage, which is lower than the 50V specification but suitable for applications not requiring the full 50V rating.

Parameter Comparison

Part Number	Manufacturer	Ic (Max) mA	Vce Breakdown (Max) V	Power (Max) mW	Frequency MHz	Package	Status
DSA2001S0L	Panasonic	100	50	200	150	MINI3-G3-B	Discontinued
2SA1037AKT146Q	Rohm Semiconductor	150	50	200	140	SMT3	Active
2SA1576U3HZGT106Q	Rohm Semiconductor	150	50	200	140	UMT3	Active
MSA1162GT1G	onsemi	100	50	200	80	SC-59	Active
2PB709ART,215	NXP USA Inc.	100	45	250	70	SOT-23	Active
BC857A,215	Nexperia USA Inc.	100	45	250	100	TO-236AB	Active
BC857B RFG	Taiwan Semiconductor Corporation	100	45	200	100	SOT-23	Active
BCX71J,235	Nexperia USA Inc.	100	45	250	100	TO-236AB	Active
BCX71K,215	NXP USA Inc.	100	45	250	100	SOT-23	Active

Engineering Selection Recommendations

Primary Substitutes (Full Electrical Equivalents):

The 2SA1037AKT146Q and 2SA1576U3HZGT106Q from Rohm Semiconductor are direct electrical equivalents with 50V breakdown voltage matching the DSA2001S0L specification. Both parts are active products with RoHS3 compliance and unlimited moisture sensitivity rating. The 2SA1037AKT146Q offers higher collector current capability (150mA) in SMT3 packaging. The 2SA1576U3HZGT106Q provides the same electrical performance in UMT3 packaging and includes AEC-Q101 automotive qualification.

The MSA1162GT1G from onsemi matches the DSA2001S0L electrical specification exactly with 50V breakdown voltage, 100mA collector current, and 200mW power rating. This part is active and RoHS3 compliant, available in SC-59 packaging.

Secondary Substitutes (Reduced Voltage Rating):

The BC857A,215, BC857B RFG, BCX71J,235, and BCX71K,215 are active products with 45V breakdown voltage, which is 5V lower than the DSA2001S0L. These parts are suitable for applications where the full 50V rating is not required. BC857A,215 and BCX71J,235 are available in TO-236AB packaging with 250mW power rating. BC857B RFG and BCX71K,215 are available in SOT-23 packaging. BCX71J,235 and BCX71K,215 include AEC-Q101 automotive qualification.

The 2PB709ART,215 from NXP USA Inc. provides 45V breakdown voltage with enhanced power dissipation (250mW) and includes AEC-Q101 automotive qualification.

Availability and Compliance:

All substitute parts listed are active products with RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Inventory availability ranges from 712 to 181,400 units across the substitute options.

Frequently Asked Questions (FAQ)

Q: Can I use a 45V rated transistor in place of the 50V DSA2001S0L?

A: A 45V rated transistor can be used only if your circuit design does not require the full 50V collector-emitter breakdown voltage specification. The 45V parts (BC857A,215, BC857B RFG, BCX71J,235, BCX71K,215, and 2PB709ART,215) are suitable for applications with maximum operating voltages below 45V. For circuits requiring 50V operation, use the 2SA1037AKT146Q, 2SA1576U3HZGT106Q, or MSA1162GT1G.

Q: What is the difference between the SMT3, UMT3, and SC-59 packages?

A: SMT3, UMT3, and SC-59 are all surface mount three-terminal packages compatible with TO-236-3 and SOT-23-3 footprints. SMT3 is the Rohm designation for standard SOT-23 packaging. UMT3 is the Rohm designation for SC-70 or SOT-323 ultra-miniature packaging, which is physically smaller. SC-59 is the onsemi designation for standard SOT-23 packaging. Package selection depends on your PCB layout requirements and available board space.

Q: Are all substitute parts RoHS3 compliant?

A: Yes, all substitute parts listed are RoHS3 compliant with unlimited moisture sensitivity rating (MSL 1), matching the compliance profile of the DSA2001S0L.

Q: Which substitute offers the best current handling capability?

A: The 2SA1037AKT146Q and 2SA1576U3HZGT106Q both offer 150mA maximum collector current, which exceeds the DSA2001S0L specification of 100mA. These parts provide additional design margin for higher current applications while maintaining the 50V breakdown voltage requirement.

Q: Do any substitutes include automotive qualification?

A: Yes, the 2SA1576U3HZGT106Q, BC857A,215, BCX71J,235, BCX71K,215, and 2PB709ART,215 include AEC-Q101 automotive qualification. These parts are suitable for automotive and industrial applications requiring formal qualification documentation.

Q: What is the transition frequency difference between the DSA2001S0L and substitutes?

A: The DSA2001S0L operates at 150MHz transition frequency. The 2SA1037AKT146Q and 2SA1576U3HZGT106Q operate at 140MHz, while BC857A,215, BC857B RFG, BCX71J,235, and BCX71K,215 operate at 100MHz. The MSA1162GT1G operates at 80MHz. For high-frequency switching applications, the Rohm parts maintain performance closest to the original specification.

Q: Is the NSVMSA1162GT1G a suitable substitute?

A: The NSVMSA1162GT1G is listed as an active product from onsemi with RoHS3 compliance and unlimited moisture sensitivity rating. However, complete electrical parameter specifications are not provided in the available data. Verification of electrical characteristics against your application requirements is necessary before selection.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message