DS9-12F Equivalent & Substitute Parts

Part Overview

The DS9-12F is a general-purpose rectifier diode manufactured by IXYS, rated for 1200 V DC reverse voltage and 11 A average rectified current in a DO-203AA stud mount package. This component is classified as obsolete, making equivalent and substitute parts necessary for ongoing system support and new design implementations. The part operates across a junction temperature range of -40°C to 180°C and features standard recovery characteristics typical of general-purpose rectifier applications.

Key Parameters

Parameter	Value
Voltage - DC Reverse (Vr) (Max)	1200 V
Current - Average Rectified (Io)	11 A
Voltage - Forward (Vf) (Max) @ If	1.4 V @ 36 A
Speed	Standard Recovery >500ns, > 200mA (Io)
Current - Reverse Leakage @ Vr	3 mA @ 1200 V
Mounting Type	Chassis, Stud Mount
Package / Case	DO-203AA, DO-4, Stud
Operating Temperature - Junction	-40°C ~ 180°C
Product Status	Obsolete

Substitute Part Grouping Explanation

Substitution of the DS9-12F is determined by the following critical parameters: voltage rating (1200 V DC reverse), mounting configuration (stud mount), package compatibility (DO-203AA/DO-4), recovery speed (standard >500ns), and operating temperature range. Substitute parts must maintain the 1200 V reverse voltage specification and stud mount mechanical interface. Current rating, forward voltage characteristics, and reverse leakage specifications are secondary selection criteria that determine application suitability within the primary constraint parameters.

The substitute parts are grouped into two categories based on current rating alignment:

Lower Current Substitutes (5 A): Parts 1N2244 and 1N2244A from Microchip Technology provide 1200 V rating with reduced current capacity, suitable for applications requiring lower current handling than the original 11 A specification.

Matched/Higher Current Substitutes (12 A): Parts S12Q, VS-12F120, and VS-12F120M provide 1200 V rating with current ratings at or above the original 11 A specification, offering direct functional replacement capability.

Parameter Comparison

Parameter	DS9-12F (IXYS)	1N2244 (Microchip)	1N2244A (Microchip)	S12Q (GeneSiC)	VS-12F120 (Vishay)	VS-12F120M (Vishay)
Voltage - DC Reverse (Vr) (Max)	1200 V	1200 V	1200 V	1200 V	1200 V	1200 V
Current - Average Rectified (Io)	11 A	5 A	5 A	12 A	12 A	12 A
Voltage - Forward (Vf) (Max) @ If	1.4 V @ 36 A	1.3 V @ 30 A	1.3 V @ 30 A	1.1 V @ 12 A	1.26 V @ 38 A	1.26 V @ 38 A
Speed	Standard Recovery >500ns, > 200mA (Io)	Standard Recovery >500ns, > 200mA (Io)	Standard Recovery >500ns, > 200mA (Io)	Standard Recovery >500ns, > 200mA (Io)	Standard Recovery >500ns, > 200mA (Io)	Standard Recovery >500ns, > 200mA (Io)
Current - Reverse Leakage @ Vr	3 mA @ 1200 V	10 µA @ 1200 V	10 µA @ 1200 V	10 µA @ 50 V	12 mA @ 1200 V	Not specified
Mounting Type	Chassis, Stud Mount	Stud Mount	Stud Mount	Chassis, Stud Mount	Chassis, Stud Mount	Chassis, Stud Mount
Package / Case	DO-203AA, DO-4, Stud	DO-203AA, DO-4, Stud	DO-203AA, DO-4, Stud	DO-203AA, DO-4, Stud	DO-203AA, DO-4, Stud	DO-203AA, DO-4, Stud
Operating Temperature - Junction	-40°C ~ 180°C	-65°C ~ 200°C	-65°C ~ 200°C	-65°C ~ 175°C	-65°C ~ 175°C	-65°C ~ 175°C
Product Status	Obsolete	Active	Active	Active	Active	Active
RoHS Status	Not specified	Not specified	Not specified	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant

Engineering Selection Recommendations

For Direct Replacement with Current Margin:

Parts VS-12F120 and VS-12F120M from Vishay General Semiconductor provide the closest functional equivalence to the DS9-12F. Both parts maintain the 1200 V reverse voltage rating, offer 12 A current capacity exceeding the original 11 A specification, and feature identical stud mount mechanical interfaces in DO-203AA packaging. Both parts carry active product status and ROHS3 compliance certification, ensuring long-term availability and regulatory alignment. The forward voltage characteristics (1.26 V @ 38 A) are comparable to the original specification.

For Current-Limited Applications:

Parts 1N2244 and 1N2244A from Microchip Technology are suitable for applications where the 11 A current requirement can be reduced to 5 A. Both parts maintain the 1200 V reverse voltage rating and stud mount configuration. These parts carry active product status and feature extended operating temperature ranges (-65°C to 200°C) compared to the original specification. The lower reverse leakage current (10 µA @ 1200 V) represents an improvement over the original 3 mA specification.

For Matched Current Performance:

Part S12Q from GeneSiC Semiconductor provides 12 A current capacity matching the higher-rated substitute options. This part maintains 1200 V reverse voltage rating and stud mount configuration with active product status and RoHS compliance. The forward voltage characteristic (1.1 V @ 12 A) is lower than the original specification, indicating improved efficiency potential.

All substitute parts maintain standard recovery speed characteristics and are compatible with the original DO-203AA/DO-4 stud mount package interface.

Frequently Asked Questions (FAQ)

Q: Can the 1N2244 or 1N2244A directly replace the DS9-12F in all applications?

A: The 1N2244 and 1N2244A are suitable substitutes only for applications where the current requirement does not exceed 5 A. Both parts maintain the 1200 V reverse voltage rating and stud mount mechanical interface. Applications requiring the full 11 A capacity of the original DS9-12F must use higher-rated substitutes such as S12Q, VS-12F120, or VS-12F120M.

Q: What is the difference between VS-12F120 and VS-12F120M?

A: Both VS-12F120 and VS-12F120M from Vishay provide identical electrical specifications: 1200 V reverse voltage, 12 A current rating, and 1.26 V forward voltage @ 38 A. Both parts feature stud mount configuration in DO-203AA packaging and carry ROHS3 compliance. The parts are functionally equivalent for the DS9-12F replacement application.

Q: Are all substitute parts compatible with the original stud mount mechanical interface?

A: All listed substitute parts feature stud mount configuration compatible with the original DS9-12F mechanical interface. Package designations (DO-203AA, DO-4, Stud) are consistent across all parts, ensuring mechanical compatibility in existing mounting configurations.

Q: Does the operating temperature range difference affect substitution suitability?

A: The DS9-12F operates from -40°C to 180°C junction temperature. Substitute parts from Microchip (1N2244, 1N2244A) extend the lower limit to -65°C and upper limit to 200°C. Substitute parts from GeneSiC and Vishay operate from -65°C to 175°C. For applications operating within the original -40°C to 180°C range, all substitute parts provide adequate thermal performance. Applications requiring operation below -40°C or above 180°C must verify compatibility with the specific substitute part's temperature rating.

Q: What is the significance of the reverse leakage current differences between parts?

A: The DS9-12F specifies 3 mA reverse leakage @ 1200 V. Substitute parts 1N2244 and 1N2244A specify 10 µA @ 1200 V, representing significantly lower leakage. Part S12Q specifies 10 µA @ 50 V (different test voltage). Parts VS-12F120 and VS-12F120M specify 12 mA @ 1200 V, representing higher leakage than the original. Reverse leakage characteristics affect power dissipation in high-voltage blocking applications. Applications sensitive to leakage current performance should select parts with specifications matching the original requirement.

Q: Are all substitute parts currently available?

A: All substitute parts carry active product status. Inventory availability: 1N2244 (705 pcs), 1N2244A (1109 pcs), S12Q (1021 pcs), VS-12F120 (827 pcs), VS-12F120M (1128 pcs). The original DS9-12F is classified as obsolete with 890 pcs in stock.

Q: What compliance certifications apply to substitute parts?

A: Parts S12Q, VS-12F120, and VS-12F120M carry RoHS compliance certifications (RoHS Compliant and ROHS3 Compliant respectively). All parts are REACH Unaffected and carry EAR99 ECCN classification with HTSUS code 8541.10.0080. Microchip parts 1N2244 and 1N2244A do not specify RoHS status in the provided data.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message