DS90C032BTM Equivalent & Substitute Parts

Part Overview

The DS90C032BTM is a 0/4 Receiver LVDS interface IC manufactured by Texas Instruments in a 16-SOIC surface mount package. This component is classified as not for new designs, indicating its legacy status in the product lifecycle. Finding equivalent and substitute parts is necessary for applications requiring continued support, inventory replenishment, or design flexibility where alternative LVDS receiver solutions meet the electrical and mechanical specifications.

Substiute Parts

DS90C032BTM

Texas InstrumentsIn Stock: 3123DS90C032BTM Datasheet

Current PartRFQ

DS90C032BTM/NOPB

Texas InstrumentsIn Stock: 1230DS90C032BTM/NOPB Datasheet

DirectRFQ

ADN4666ARZ

Analog Devices Inc.In Stock: 5316ADN4666ARZ Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the DS90C032BTM is determined by strict alignment of the following parameters:

• Receiver Configuration: 0/4 (four receivers, no drivers)
• Protocol: LVDS (Low-Voltage Differential Signaling)
• Package: 16-SOIC form factor with identical physical dimensions
• Operating Temperature Range: -40°C to 85°C
• Supply Voltage Compatibility: Parts must operate within or encompass the 4.5V to 5.5V range
• Compliance: ROHS3 compliance and MSL rating of 1

Substitute parts are grouped into two categories: direct equivalents from the same manufacturer and cross-manufacturer alternatives that meet all electrical and mechanical requirements.

Parameter Comparison

Engineering Selection Recommendations

DS90C032BTM/NOPB is the direct equivalent from Texas Instruments. This part maintains identical electrical specifications and package configuration while offering active product status. Selection of this part is appropriate for applications requiring continuity with the original DS90C032BTM design without modification.

ADN4666ARZ from Analog Devices Inc. is a cross-manufacturer alternative that meets the core substitution criteria: 0/4 LVDS receiver configuration, 16-SOIC package, and -40°C to 85°C operating temperature range. However, the supply voltage range differs (3V ~ 3.6V versus 4.5V ~ 5.5V). This part is suitable only for applications where the lower supply voltage range is compatible with system design requirements. Both substitute parts carry ROHS3 compliance and MSL rating of 1, meeting environmental and reliability standards.

Frequently Asked Questions (FAQ)

Q: Can DS90C032BTM/NOPB be used as a direct replacement for DS90C032BTM?

A: Yes. Both parts share identical electrical specifications, package dimensions, and operating parameters. The primary difference is product status: DS90C032BTM/NOPB is active, while DS90C032BTM is not for new designs.

Q: Is ADN4666ARZ compatible with designs using DS90C032BTM?

A: ADN4666ARZ matches the receiver configuration, package form factor, and temperature range. However, it operates at 3V ~ 3.6V supply voltage, whereas DS90C032BTM requires 4.5V ~ 5.5V. Compatibility depends on whether your system can accommodate the lower voltage specification.

Q: Are all substitute parts in the same package?

A: Yes. All listed parts use the 16-SOIC (0.154", 3.90mm Width) package, ensuring mechanical compatibility and identical PCB footprints.

Q: Do all parts meet RoHS and MSL requirements?

A: Yes. DS90C032BTM/NOPB and ADN4666ARZ are both ROHS3 compliant with MSL rating of 1 (unlimited moisture sensitivity level), matching the original part's compliance profile.

Q: What is the primary reason to substitute DS90C032BTM?

A: The original part carries a "Not For New Designs" status, indicating end-of-life or legacy classification. DS90C032BTM/NOPB provides the same functionality with active product support, while ADN4666ARZ offers a cross-manufacturer alternative for applications with compatible voltage requirements.