Request Quote
(Ships tomorrow)
DS3695ATMX Equivalent & Substitute Parts
Part Overview
The DS3695ATMX is a half-duplex RS422/RS485 transceiver IC manufactured by Texas Instruments in an 8-SOIC surface mount package. This part is classified as obsolete, making equivalent substitute parts necessary for new designs and ongoing production requirements. The DS3695ATMX operates within a 4.75V to 5.25V supply voltage range with a receiver hysteresis of 70 mV, designed for industrial communication applications requiring reliable half-duplex serial data transmission.
Substiute Parts
Key Parameters
| Parameter | DS3695ATMX |
|---|---|
| Manufacturer | Texas Instruments |
| Type | Transceiver |
| Protocol | RS422, RS485 |
| Duplex Configuration | Half |
| Number of Drivers/Receivers | 1/1 |
| Receiver Hysteresis | 70 mV |
| Voltage Supply Range | 4.75V ~ 5.25V |
| Operating Temperature | 0°C ~ 70°C |
| Package Type | 8-SOIC (0.154", 3.90mm Width) |
| Mounting Type | Surface Mount |
| Product Status | Obsolete |
| RoHS Status | RoHS non-compliant |
| Moisture Sensitivity Level | 1 (Unlimited) |
Substitute Part Grouping Explanation
Substitution of the DS3695ATMX is determined by the following critical parameters:
Primary Compatibility Criteria:
- Protocol support: RS422 and RS485 half-duplex operation
- Duplex configuration: Half-duplex only
- Driver/Receiver configuration: 1/1 (single driver, single receiver)
- Package footprint: 8-SOIC (0.154", 3.90mm Width) for direct PCB compatibility
- Supply voltage range: Minimum 4.75V to 5.25V operation
- Receiver hysteresis: 70 mV specification
Secondary Selection Factors:
- Product status: Active parts are preferred over obsolete classifications
- RoHS compliance: ROHS3 compliant alternatives are available
- Operating temperature range: Extended temperature variants (-40°C to 85°C) provide broader application scope
- Data rate capability: Varies across substitutes from 250 kbps to 20 Mbps
- Packaging options: Cut Tape, Tube, and Reel configurations affect procurement and assembly
All substitute parts listed maintain electrical and mechanical compatibility with the DS3695ATMX within the specified parameter constraints.
Parameter Comparison
| Part Number | Manufacturer | Protocol | Duplex | Drivers/Receivers | Receiver Hysteresis | Supply Voltage | Operating Temp | Package | Data Rate | Product Status | RoHS Status |
|---|---|---|---|---|---|---|---|---|---|---|---|
| DS3695ATMX | Texas Instruments | RS422, RS485 | Half | 1/1 | 70 mV | 4.75V ~ 5.25V | 0°C ~ 70°C | 8-SOIC | — | Obsolete | RoHS non-compliant |
| ADM485ARZ | UMW | RS422, RS485 | Half | 1/1 | 70 mV | 4.75V ~ 5.25V | 0°C ~ 70°C | 8-SOIC | 2.5 Mbps | Active | ROHS3 Compliant |
| ADM485ARZ-REEL | Analog Devices Inc. | RS422, RS485 | Half | 1/1 | 70 mV | 4.75V ~ 5.25V | -40°C ~ 85°C | 8-SOIC | 5 Mbps | Active | ROHS3 Compliant |
| ADM485JRZ | Analog Devices Inc. | RS422, RS485 | Half | 1/1 | 70 mV | 4.75V ~ 5.25V | 0°C ~ 70°C | 8-SOIC | 5 Mbps | Active | ROHS3 Compliant |
| ADM485JRZ-REEL | Analog Devices Inc. | RS422, RS485 | Half | 1/1 | 70 mV | 4.75V ~ 5.25V | 0°C ~ 70°C | 8-SOIC | 5 Mbps | Active | ROHS3 Compliant |
| ADM485JRZ-REEL7 | Analog Devices Inc. | RS422, RS485 | Half | 1/1 | 70 mV | 4.75V ~ 5.25V | 0°C ~ 70°C | 8-SOIC | 5 Mbps | Active | ROHS3 Compliant |
| HI-4853PSHF | Holt Integrated Circuits Inc. | RS422, RS485 | Half | 1/1 | — | 3.15V ~ 5.5V | -55°C ~ 175°C | 8-SOIC | 20 Mbps | Active | ROHS3 Compliant |
| LT1785ACS8#PBF | Analog Devices Inc. | RS422, RS485 | Half | 1/1 | 20 mV | 4.75V ~ 5.25V | 0°C ~ 70°C | 8-SOIC | 250 kbps | Active | ROHS3 Compliant |
| LT1785ACS8#TRPBF | Analog Devices Inc. | RS422, RS485 | Half | 1/1 | 20 mV | 4.75V ~ 5.25V | 0°C ~ 70°C | 8-SOIC | 250 kbps | Active | ROHS3 Compliant |
| LT1785AIS8#PBF | Analog Devices Inc. | RS422, RS485 | Half | 1/1 | 20 mV | 4.75V ~ 5.25V | -40°C ~ 85°C | 8-SOIC | 250 kbps | Active | ROHS3 Compliant |
| LT1785AIS8#TRPBF | Analog Devices Inc. | RS422, RS485 | Half | 1/1 | 20 mV | 4.75V ~ 5.25V | -40°C ~ 85°C | 8-SOIC | 250 kbps | Active | ROHS3 Compliant |
Engineering Selection Recommendations
Primary Substitutes (Highest Compatibility):
The ADM485 series from Analog Devices Inc. (ADM485ARZ, ADM485ARZ-REEL, ADM485JRZ, ADM485JRZ-REEL, ADM485JRZ-REEL7) provides direct electrical and mechanical equivalence to the DS3695ATMX. All variants maintain the 70 mV receiver hysteresis specification, identical supply voltage range, and 8-SOIC package footprint. These parts are active products with ROHS3 compliance, addressing the obsolescence and regulatory concerns of the original part. The ADM485ARZ-REEL variant extends the operating temperature range to -40°C to 85°C, suitable for industrial environments requiring broader thermal performance.
Extended Temperature Alternative:
The HI-4853PSHF from Holt Integrated Circuits Inc. offers the widest operating temperature range (-55°C to 175°C) and highest data rate capability (20 Mbps) among available substitutes. This part maintains RS422/RS485 half-duplex operation with 1/1 driver/receiver configuration and 8-SOIC packaging. The supply voltage range extends to 3.15V to 5.5V, providing additional flexibility for low-power applications. This option is suitable for extreme environment applications where standard industrial temperature ranges are insufficient.
Lower Data Rate Alternative:
The LT1785 series (LT1785ACS8#PBF, LT1785ACS8#TRPBF, LT1785AIS8#PBF, LT1785AIS8#TRPBF) from Analog Devices Inc. maintains full RS422/RS485 half-duplex compatibility with identical supply voltage specifications. These parts feature a 20 mV receiver hysteresis specification and 250 kbps data rate, suitable for legacy communication protocols and noise-sensitive applications. The LT1785AIS8 variants support extended temperature operation (-40°C to 85°C), while LT1785ACS8 variants operate within 0°C to 70°C.
Selection Criteria:
- For direct replacement in existing designs: ADM485JRZ or ADM485JRZ-REEL
- For extended temperature requirements: ADM485ARZ-REEL or HI-4853PSHF
- For high-speed applications: HI-4853PSHF (20 Mbps capability)
- For legacy low-speed systems: LT1785 series variants
- For RoHS compliance: All listed substitutes except DS3695ATMX
Frequently Asked Questions (FAQ)
Q: Can the ADM485 series directly replace the DS3695ATMX without PCB modifications?
A: Yes. The ADM485 series maintains identical 8-SOIC package dimensions, pin configuration, and electrical specifications including 70 mV receiver hysteresis and 4.75V to 5.25V supply voltage range. No PCB layout changes are required for direct substitution.
Q: What is the primary difference between ADM485ARZ and ADM485JRZ variants?
A: Both variants maintain identical electrical specifications and 8-SOIC packaging. The primary difference is operating temperature range: ADM485ARZ operates 0°C to 70°C, while ADM485JRZ also operates 0°C to 70°C. The ADM485ARZ-REEL variant extends to -40°C to 85°C for industrial applications requiring broader thermal performance.
Q: Why does the HI-4853PSHF have different receiver hysteresis specifications?
A: The HI-4853PSHF datasheet does not specify receiver hysteresis in the provided parameters. This part is suitable for applications where hysteresis specification is not a critical design constraint. Consult the manufacturer datasheet for detailed receiver threshold specifications.
Q: Are all substitute parts RoHS compliant?
A: All listed substitute parts are ROHS3 compliant. The original DS3695ATMX is RoHS non-compliant, making the substitutes suitable for applications requiring regulatory compliance with modern environmental standards.
Q: What packaging options are available for the ADM485 series?
A: The ADM485 series is available in multiple packaging configurations: ADM485ARZ (Cut Tape & Digi-Reel), ADM485ARZ-REEL (Cut Tape & Digi-Reel), ADM485JRZ (Tube), ADM485JRZ-REEL (Cut Tape & Digi-Reel), and ADM485JRZ-REEL7 (Cut Tape & Digi-Reel). Selection depends on procurement and assembly requirements.
Q: Can the LT1785 series be used in high-speed RS485 networks?
A: The LT1785 series is rated for 250 kbps data rate, suitable for standard industrial RS485 applications. For high-speed networks exceeding 250 kbps, the ADM485 series (2.5 to 5 Mbps) or HI-4853PSHF (20 Mbps) are recommended.
Q: What is the inventory status of substitute parts?
A: All substitute parts listed are in active production with substantial inventory availability: ADM485ARZ (29,020 pcs), ADM485ARZ-REEL (20,200 pcs), ADM485JRZ (25,600 pcs), ADM485JRZ-REEL (44,354 pcs), ADM485JRZ-REEL7 (15,953 pcs), HI-4853PSHF (23,832 pcs), LT1785ACS8#PBF (1,396 pcs), LT1785ACS8#TRPBF (2,242 pcs), LT1785AIS8#PBF (1,581 pcs), and LT1785AIS8#TRPBF (18,997 pcs).
Alternative Parts
SJ6012L2TP
Littelfuse Inc.
6 Alternative Parts
JMK107BBJ476MA-RE
Taiyo Yuden
10 Alternative Parts
GMK107BBJ475MA-T
Taiyo Yuden
5 Alternative Parts
SJ6020N2ARP
Littelfuse Inc.
3 Alternative Parts
SJ6025R2ATP
Littelfuse Inc.
4 Alternative Parts
2474-05L
API Delevan Inc.
1 Alternative Parts
4590R-684K
API Delevan Inc.
1 Alternative Parts
CM6560R-334
API Delevan Inc.
1 Alternative Parts
CM6460-104
API Delevan Inc.
1 Alternative Parts
5526-12
API Delevan Inc.
1 Alternative Parts





