DS2760BE+ Equivalent & Substitute Parts

Part Overview

The DS2760BE+ is a Battery Monitor IC for Lithium Ion applications manufactured by Analog Devices Inc./Maxim Integrated. This component provides real-time battery monitoring with integrated fault protection including over-current, over/under-voltage, and short-circuit detection via a 1-Wire interface. The DS2760BE+ is classified as obsolete, making identification of active equivalent parts essential for ongoing design support and production continuity.

Substiute Parts

DS2760BE+

Analog Devices Inc./Maxim IntegratedIn Stock: 806DS2760BE+ Datasheet

Current PartRFQ

DS2762BE+

Analog Devices Inc./Maxim IntegratedIn Stock: 1026DS2762BE+ Datasheet

MFR RecommendedRFQ

DS2762AE+

Analog Devices Inc./Maxim IntegratedIn Stock: 1833DS2762AE+ Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the DS2760BE+ is determined by strict equivalence across the following critical parameters:

• Functional Equivalence: Battery Monitor IC for Lithium Ion chemistry
• Interface Compatibility: 1-Wire communication protocol
• Fault Protection Features: Over Current, Over/Under Voltage, Short Circuit detection
• Thermal Operating Range: -20°C ~ 70°C (TA)
• Package Compatibility: 16-TSSOP form factor with identical 0.173" (4.40mm) width
• Compliance Standards: ROHS3 Compliant, REACH Unaffected, MSL 1

The DS2762BE+ and DS2762AE+ meet all substitution criteria. Both are active products from the same manufacturer, share identical electrical specifications and packaging, and maintain full compliance with applicable standards.

Parameter Comparison

Engineering Selection Recommendations

Both DS2762BE+ and DS2762AE+ are direct functional equivalents to the obsolete DS2760BE+. Selection between the two substitute parts should be based on availability and packaging requirements:

DS2762BE+ is designated as the manufacturer-recommended substitute, offering active product status with established supply chain support.

DS2762AE+ is a parametric equivalent with identical electrical and mechanical specifications, available in higher inventory quantities (1748 Pcs vs. 954 Pcs).

Both parts maintain ROHS3 compliance, REACH compliance status, and identical thermal and electrical operating parameters. Either part is suitable for direct replacement in existing designs without circuit modification.

Frequently Asked Questions (FAQ)

Q: Can DS2762BE+ or DS2762AE+ be used as direct replacements for DS2760BE+ in existing designs?

A: Yes. Both substitute parts are electrically and mechanically equivalent. They share identical 1-Wire interface specifications, fault protection features, operating temperature range, and 16-TSSOP packaging. No circuit redesign is required.

Q: What is the difference between DS2762BE+ and DS2762AE+?

A: Both parts are parametrically identical. The difference lies in product designation and inventory availability. DS2762BE+ is the manufacturer-recommended substitute with 954 units in stock. DS2762AE+ is a parametric equivalent with higher inventory (1748 units). Electrical and mechanical specifications are identical.

Q: Are there any compliance or certification differences between the main part and substitutes?

A: No. All three parts (DS2760BE+, DS2762BE+, DS2762AE+) maintain identical ROHS3 compliance, REACH unaffected status, MSL 1 rating, and EAR99 ECCN classification.

Q: Is the 16-TSSOP package identical across all three parts?

A: Yes. All parts use the 16-TSSOP package with 0.173" (4.40mm) width. PCB footprints and assembly processes are identical.

Q: What is the operating temperature range for these parts?

A: All three parts operate across -20°C to 70°C (TA). This range is identical across DS2760BE+, DS2762BE+, and DS2762AE+.