DS2502P EPROM 1-Wire Memory IC - Equivalent & Substitute Parts

Part Overview

The DS2502P is a 1Kbit EPROM non-volatile memory IC manufactured by Analog Devices Inc./Maxim Integrated, packaged in a 6-TSOC surface mount configuration. This component implements 1-Wire® protocol communication with 128 x 8 memory organization. The DS2502P is currently classified as obsolete, making identification of compatible substitute parts essential for ongoing system support and new design implementations.

Substiute Parts

DS2502P

Analog Devices Inc./Maxim IntegratedIn Stock: 17745DS2502P Datasheet

Current PartRFQ

DS2502P+

Analog Devices Inc./Maxim IntegratedIn Stock: 6072DS2502P+ Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the DS2502P is determined by strict equivalence across the following critical parameters:

• Memory Type: Non-Volatile EPROM
• Memory Size: 1Kbit capacity
• Memory Organization: 128 x 8 configuration
• Memory Interface: 1-Wire® protocol compatibility
• Memory Format: EPROM - OTP technology
• Supply Voltage: 2.8V ~ 6V operating range
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 6-SMD, J-Lead form factor
• Supplier Device Package: 6-TSOC

The DS2502P+ qualifies as a direct substitute based on complete alignment with all electrical and mechanical parameters. The primary distinction is product status and compliance certification.

Parameter Comparison

Engineering Selection Recommendations

The DS2502P+ is a direct electrical and mechanical equivalent to the DS2502P. Selection between these parts should be based on the following criteria:

DS2502P+ is the preferred choice for new designs and ongoing production due to:

• Active product status with continued manufacturer support
• ROHS3 compliance certification
• Identical electrical specifications and 1-Wire® protocol implementation
• Same 6-TSOC package footprint and pinout

DS2502P remains applicable only for legacy system maintenance where existing inventory or specific non-compliance requirements apply.

Both parts share identical memory capacity, interface protocol, voltage specifications, and temperature operating range, ensuring functional interchangeability in circuit implementations.

Frequently Asked Questions (FAQ)

Q: Can DS2502P+ be used as a direct replacement for DS2502P in existing designs?

A: Yes. The DS2502P+ provides complete electrical and mechanical equivalence. All memory specifications, 1-Wire® interface characteristics, supply voltage range (2.8V ~ 6V), and operating temperature range (-40°C ~ 85°C) are identical. The 6-TSOC package footprint and pinout are unchanged.

Q: What is the primary difference between DS2502P and DS2502P+?

A: The DS2502P is obsolete, while DS2502P+ maintains active product status. Additionally, DS2502P+ is ROHS3 compliant, whereas DS2502P is RoHS non-compliant. Electrical and mechanical specifications are identical.

Q: Are there any package or pinout differences between these parts?

A: No. Both parts use the 6-SMD, J-Lead package configuration with 6-TSOC supplier device package designation. Pinout and footprint are identical.

Q: What memory capacity does the DS2502P provide?

A: The DS2502P provides 1Kbit of non-volatile EPROM memory organized as 128 x 8 bits, accessed via 1-Wire® serial protocol.

Q: What supply voltage range is required for DS2502P operation?

A: The DS2502P operates across a 2.8V to 6V supply voltage range, suitable for both 3.3V and 5V logic systems.

Q: Is the DS2502P+ available in different packaging options?

A: The DS2502P+ is supplied in Tube packaging. The DS2502P packaging specification was not provided in the component data.