DS1836CS-10+ Equivalent & Substitute Parts Reference

Part Overview

The DS1836CS-10+ is a single-channel supervisor integrated circuit manufactured by Analog Devices Inc./Maxim Integrated, part of the MicroManager series. This Power Management (PMIC) device functions as a battery backup circuit supervisor with push-pull, totem pole output configuration. The part is currently in active product status with 1071 units available in new original inventory. The DS1836CS-10+ is essential for applications requiring voltage monitoring and reset signal generation in battery-backed systems.

Substiute Parts

DS1836CS-10+

Analog Devices Inc./Maxim IntegratedIn Stock: 1148DS1836CS-10+ Datasheet

Current PartRFQ

DS1836CS-10+

Analog Devices Inc./Maxim IntegratedIn Stock: 1148DS1836CS-10+ Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution for the DS1836CS-10+ supervisor IC is determined by strict equivalence across the following critical parameters:

Functional Parameters:

• Single-channel voltage monitoring capability
• 2.88V threshold voltage setting
• Push-pull, totem pole output configuration
• Active low reset signal polarity
• 200ms minimum reset timeout duration

Physical & Environmental Parameters:

• 8-SOIC surface mount package (0.154", 3.90mm width)
• Operating temperature range of -40°C to 85°C
• Moisture sensitivity level 1 (unlimited shelf life)

Compliance & Regulatory Parameters:

• ROHS3 compliance requirement
• REACH unaffected status
• EAR99 export classification

Parts meeting all these specifications are classified as parametric equivalents. The DS1836CS-10+ from Analog Devices Inc./Maxim Integrated represents the current active production equivalent for this functional and physical specification set.

Parameter Comparison

Engineering Selection Recommendations

The DS1836CS-10+ maintains active product status with confirmed inventory availability of 1071 units in new original condition. This part is ROHS3 compliant and carries REACH unaffected designation, meeting current environmental and regulatory requirements for industrial and commercial applications.

Selection of the DS1836CS-10+ supervisor IC is appropriate for applications requiring single-channel voltage monitoring at 2.88V threshold with push-pull output configuration and active low reset signal generation. The 8-SOIC surface mount package and -40°C to 85°C operating temperature range support deployment across standard industrial temperature environments.

The MSL 1 rating indicates unlimited shelf life under standard storage conditions, supporting supply chain flexibility and inventory management without time-sensitive constraints.

Frequently Asked Questions (FAQ)

Q: What determines if a part can substitute for the DS1836CS-10+?

A: A substitute part must match all critical parameters: single-channel voltage monitoring, 2.88V threshold voltage, push-pull totem pole output, active low reset signal, 200ms minimum reset timeout, 8-SOIC package, -40°C to 85°C operating temperature, and ROHS3 compliance.

Q: Can the DS1836CS-10+ be used in applications requiring different voltage thresholds?

A: No. The DS1836CS-10+ is fixed at 2.88V threshold voltage. Applications requiring different threshold values require alternative supervisor IC models with different threshold specifications.

Q: Is the 8-SOIC package interchangeable with other package types?

A: No. The 8-SOIC (0.154", 3.90mm width) package is specific to this device. PCB layout and footprint design are based on this package geometry. Alternative packages require PCB redesign.

Q: What is the significance of the MSL 1 rating?

A: MSL 1 indicates unlimited shelf life under standard storage conditions (typically 30°C, 85% relative humidity). This part does not require special moisture control or accelerated reflow procedures.

Q: Does the DS1836CS-10+ require external components for operation?

A: Component requirements are determined by specific application circuit design. Refer to the device datasheet for recommended application schematics and external component specifications.

Q: Are there version variants of the DS1836CS-10+?

A: The DS1836CS-10+ represents the current active production part number. The base product number DS1836 may have variants with different suffix designations indicating package type, temperature range, or lead finish specifications.