DS1836C-10+ Equivalent & Substitute Parts Reference

Part Overview

The DS1836C-10+ is a single-channel supervisor integrated circuit manufactured by Analog Devices Inc./Maxim Integrated, part of the MicroManager series. This Power Management (PMIC) device functions as a battery backup circuit supervisor with push-pull, totem pole output configuration. The component is actively produced and maintains full inventory availability. Equivalent and substitute parts are identified based on matching electrical characteristics, package specifications, and functional parameters that ensure direct interchangeability in circuit applications.

Substiute Parts

DS1836C-10+

Analog Devices Inc./Maxim IntegratedIn Stock: 797DS1836C-10+ Datasheet

Current PartRFQ

DS1836C-10+

Analog Devices Inc./Maxim IntegratedIn Stock: 797DS1836C-10+ Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the DS1836C-10+ is determined by the following critical parameters:

• Single-channel voltage monitoring capability with 2.88V threshold setting
• Push-pull, totem pole output configuration for reset signal delivery
• Active low reset logic with 200ms minimum timeout specification
• 8-DIP through-hole package (0.300", 7.62mm) for PCB mounting compatibility
• Operating temperature range of -40°C to 85°C
• ROHS3 compliance and MSL Level 1 environmental rating

Parts meeting all these electrical and mechanical specifications are classified as direct equivalents. The DS1836C-10+ serves as both the primary reference and the confirmed substitute, as it matches all specified parameters without deviation.

Parameter Comparison

Engineering Selection Recommendations

The DS1836C-10+ maintains active product status with confirmed inventory availability of 721 pieces in new original condition. Selection of this component or its direct equivalent is supported by:

• ROHS3 compliance for environmental and regulatory requirements
• MSL Level 1 rating indicating no moisture sensitivity constraints during storage and handling
• Active manufacturing status ensuring long-term supply chain reliability
• Established MicroManager series positioning within Analog Devices' power management portfolio

No alternative part variants are required when the DS1836C-10+ specification is met in full.

Frequently Asked Questions (FAQ)

Q: What defines a direct substitute for the DS1836C-10+?

A: A direct substitute must match all electrical parameters (1-channel monitoring, 2.88V threshold, push-pull totem pole output, active low reset, 200ms timeout) and mechanical specifications (8-DIP through-hole package, -40°C to 85°C operating range). The DS1836C-10+ itself fulfills these criteria.

Q: Can the DS1836C-10+ be used in applications requiring different voltage thresholds?

A: No. The 2.88V threshold is a fixed specification of this part number. Applications requiring different threshold voltages require alternative part numbers from the MicroManager series with different threshold ratings.

Q: Is the 8-DIP through-hole package interchangeable with surface-mount alternatives?

A: No. The through-hole 8-DIP package is mechanically and electrically distinct from surface-mount packages. PCB design and assembly processes must accommodate the specified package type.

Q: What is the significance of the MSL Level 1 rating?

A: MSL Level 1 indicates unlimited shelf life without moisture sensitivity constraints. This component does not require special moisture-controlled storage or baking procedures prior to assembly.

Q: Does ROHS3 compliance affect substitution eligibility?

A: Yes. Substitute parts must maintain ROHS3 compliance to meet regulatory and procurement requirements. Non-compliant alternatives are not acceptable substitutes.