DS1245ABP-70IND+ NVSRAM Memory IC Equivalent & Substitute Parts

Part Overview

The DS1245ABP-70IND+ is a Non-Volatile SRAM (NVSRAM) memory integrated circuit manufactured by Analog Devices Inc./Maxim Integrated. This 1Mbit parallel memory device combines SRAM speed with non-volatile storage capability, operating at 70 ns access time with a 34-PowerCap™ Module package. The component is classified as Active product status with full RoHS3 compliance and REACH unaffected designation. Alternative equivalent parts are necessary for supply chain continuity, inventory management, and regional component availability.

Key Parameters

Parameter	Specification
Memory Type	Non-Volatile SRAM (NVSRAM)
Memory Size	1Mbit
Memory Organization	128K x 8
Memory Interface	Parallel
Access Time	70 ns
Write Cycle Time	70 ns
Supply Voltage	4.75V ~ 5.25V
Operating Temperature Range	-40°C ~ 85°C (TA)
Package Type	34-PowerCap™ Module
Mounting Type	Surface Mount
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level	3 (168 Hours)

Substitute Part Grouping Explanation

Substitution for the DS1245ABP-70IND+ NVSRAM memory IC is determined by strict equivalence across the following critical parameters:

Memory Capacity & Organization: The substitute must provide 1Mbit total capacity with 128K x 8 organization to ensure direct pin and functional compatibility.

Memory Technology: The substitute must be NVSRAM (Non-Volatile SRAM) technology to maintain non-volatile storage capability combined with SRAM access speeds.

Performance Specifications: Access time and write cycle time must be 70 ns or faster to guarantee timing compatibility in the host system.

Electrical Characteristics: Supply voltage range must encompass 4.75V ~ 5.25V to ensure operation across the specified input voltage window.

Thermal Range: Operating temperature range must cover -40°C ~ 85°C to support the full specified environmental operating conditions.

Package & Mounting: The substitute must use the 34-PowerCap™ Module package with surface mount configuration for mechanical and electrical pin compatibility.

Compliance Standards: The substitute must maintain RoHS3 compliance and REACH unaffected status to satisfy regulatory and environmental requirements.

Parameter Comparison

Parameter	DS1245ABP-70IND+ (Main Part)	DS1245ABP-70IND+ (Direct Equivalent)
Manufacturer	Analog Devices Inc./Maxim Integrated	Analog Devices Inc./Maxim Integrated
Memory Type	Non-Volatile SRAM	Non-Volatile SRAM
Memory Size	1Mbit	1Mbit
Memory Organization	128K x 8	128K x 8
Memory Interface	Parallel	Parallel
Access Time	70 ns	70 ns
Write Cycle Time	70 ns	70 ns
Supply Voltage	4.75V ~ 5.25V	4.75V ~ 5.25V
Operating Temperature	-40°C ~ 85°C	-40°C ~ 85°C
Package Type	34-PowerCap™ Module	34-PowerCap™ Module
Mounting Type	Surface Mount	Surface Mount
RoHS Status	ROHS3 Compliant	ROHS3 Compliant
Moisture Sensitivity Level	3 (168 Hours)	3 (168 Hours)
Product Status	Active	Active

Engineering Selection Recommendations

The DS1245ABP-70IND+ maintains Active product status with full RoHS3 compliance and REACH unaffected classification, confirming ongoing manufacturer support and regulatory compliance. The direct equivalent DS1245ABP-70IND+ part number represents the same component specification and is suitable for direct substitution without design modification.

Component selection should prioritize parts with identical memory capacity (1Mbit), organization (128K x 8), and package configuration (34-PowerCap™ Module) to ensure mechanical and electrical compatibility. Verify that substitute parts maintain the specified access time (70 ns) and supply voltage range (4.75V ~ 5.25V) to guarantee system-level performance.

Compliance certifications including RoHS3 and REACH status should be confirmed for all substitute components to satisfy procurement and regulatory requirements.

Frequently Asked Questions (FAQ)

Q: Can I substitute the DS1245ABP-70IND+ with a different memory capacity?

A: No. The substitute must provide exactly 1Mbit capacity with 128K x 8 organization. Different capacities will not provide pin-for-pin compatibility and will not function in the host circuit.

Q: What is the significance of the 34-PowerCap™ Module package?

A: The 34-PowerCap™ Module package defines the physical form factor, pin count, and electrical interface. Substitutes must use this identical package type to ensure mechanical fit and electrical connectivity on the PCB.

Q: Are faster access times acceptable for substitution?

A: Yes. A substitute with access time faster than 70 ns (for example, 60 ns or 50 ns) will function correctly in the circuit. The 70 ns specification represents the maximum acceptable access time; faster parts are compatible.

Q: Does the operating temperature range affect substitution compatibility?

A: Yes. The substitute must support the full -40°C ~ 85°C operating temperature range. Parts with narrower temperature ranges may not function reliably across the specified environmental conditions.

Q: What does ROHS3 compliance mean for component substitution?

A: ROHS3 compliance indicates the component meets Restriction of Hazardous Substances regulations. Substitutes must maintain this compliance status to satisfy procurement standards and environmental regulations.

Q: Is the 34-PowerCap™ Module package interchangeable with other package types?

A: No. The 34-PowerCap™ Module is a specific package configuration. Substitutes must use this identical package type; other package types such as DIP, PLCC, or BGA will not provide mechanical or electrical compatibility.

Q: What is Moisture Sensitivity Level (MSL) 3, and why does it matter?

A: MSL 3 indicates the component can be stored in standard conditions for up to 168 hours before soldering. Substitutes must maintain the same MSL rating to ensure proper handling and storage procedures are compatible.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message