DS07 DIP Switch SPST 7 Position Equivalent & Substitute Parts

Part Overview

The DS07 is a slide-actuated DIP switch manufactured by APEM Inc., configured as a single-pole single-throw (SPST) switch with 7 positions. It is rated for 50mA at 24VDC and designed for through-hole mounting on printed circuit boards. The DS07 carries an obsolete product status, making identification of functionally equivalent alternatives necessary for ongoing design support and component procurement.

Substiute Parts

DS07

APEM Inc.In Stock: 1051DS07 Datasheet

Current PartRFQ

208-7

CTS ElectrocomponentsIn Stock: 1254208-7 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the DS07 is determined by the following critical parameters:

• Circuit Configuration: Must be SPST to maintain single-pole single-throw functionality
• Number of Positions: Must be 7 to ensure pin-for-pin compatibility
• Current Rating: Must support minimum 50mA at rated voltage
• Voltage Rating: Must support 24VDC operation
• Actuator Type: Must be slide-actuated to match user interface expectations
• Mounting Type: Must be through-hole to fit existing PCB layouts
• Pitch: Must be 0.100" (2.54mm) for footprint compatibility
• Termination Style: Must use PC pins for solder connection compatibility

The CTS Electrocomponents 208-7 satisfies all critical substitution parameters and is classified as an active product, providing long-term availability assurance.

Parameter Comparison

Engineering Selection Recommendations

The CTS Electrocomponents 208-7 is the qualified substitute for the obsolete DS07. Both components meet identical electrical and mechanical specifications across all critical parameters. The 208-7 carries active product status, ensuring continued availability and supply chain stability. Both parts maintain ROHS3 compliance and REACH unaffected status, satisfying regulatory requirements for current manufacturing environments. The 208-7 is currently in stock with 1,161 units available, providing immediate procurement capability.

Frequently Asked Questions (FAQ)

Q: Can the 208-7 be used as a direct replacement for the DS07 in existing designs?

A: Yes. Both components share identical circuit configuration (SPST), position count (7), electrical ratings (50mA at 24VDC), actuator type (slide), mounting method (through-hole), and pitch (0.100"). Pin-for-pin compatibility is confirmed.

Q: What are the physical differences between the DS07 and 208-7?

A: The DS07 has a height above board of 0.271" (6.88mm) and length of 0.759" (19.28mm). The 208-7 measures 0.334" (8.48mm) in height and 0.786" (19.96mm) in length. These dimensional variations require verification against PCB clearance constraints and enclosure specifications.

Q: Are there compliance or certification differences?

A: Both components are ROHS3 compliant and REACH unaffected. Both carry EAR99 export classification and share the same HTSUS code (8536.50.9065). No compliance barriers exist for substitution.

Q: What is the difference in product status between these parts?

A: The DS07 is classified as obsolete, indicating discontinued manufacturing. The 208-7 is active, confirming ongoing production and long-term availability.

Q: Are there differences in mechanical or electrical life ratings?

A: Electrical life is identical at 2,000 cycles for both parts. Mechanical life data is not provided for the 208-7, while the DS07 specifies 5,000 cycles.