DS06 DIP Switch SPST 6 Position Equivalent & Substitute Parts

Part Overview

The DS06 is a slide-actuated DIP switch manufactured by APEM Inc., configured as a single-pole single-throw (SPST) switch with 6 positions. It is rated for 50mA at 24VDC and designed for through-hole mounting on printed circuit boards. The DS06 is classified as obsolete, making identification of functionally equivalent substitute components essential for ongoing production support, design updates, and inventory management.

Key Parameters

Parameter	Value
Circuit Configuration	SPST (Single-Pole Single-Throw)
Number of Positions	6
Current Rating	50mA
Voltage Rating	24VDC
Actuator Type	Slide (Standard)
Mounting Type	Through Hole
Termination Style	PC Pin
Pitch	0.100" (2.54mm)
Electrical Life	2,000 Cycles
RoHS Status	ROHS3 Compliant

Substitute Part Grouping Explanation

The CTS Electrocomponents 208-6 qualifies as a direct substitute for the DS06 based on the following critical parameters:

Circuit Configuration: Both parts are SPST switches with identical electrical topology
Position Count: Both feature 6 positions, ensuring pin-for-pin compatibility
Current and Voltage Ratings: Both are rated 50mA at 24VDC, meeting identical electrical load requirements
Actuator Type: Both use slide-actuated mechanisms with raised actuator levels
Mounting and Termination: Both employ through-hole mounting with PC pin termination at 0.100" (2.54mm) pitch
Electrical Life: Both specify 2,000 cycles electrical life
Regulatory Compliance: Both are ROHS3 compliant and REACH unaffected

Parameter Comparison

Parameter	DS06 (APEM Inc.)	208-6 (CTS Electrocomponents)	Compatibility Notes
Manufacturer Part Number	DS06	208-6	Different manufacturers
Circuit Configuration	SPST	SPST	Identical
Number of Positions	6	6	Identical
Current Rating (Amps)	50mA	50mA	Identical
Voltage Rating	24VDC	24VDC	Identical
Actuator Type	Slide (Standard)	Slide (Standard)	Identical
Actuator Level	Raised	Raised	Identical
Mounting Type	Through Hole	Through Hole	Identical
Termination Style	PC Pin	PC Pin	Identical
Pitch	0.100" (2.54mm)	0.100" (2.54mm)	Identical
Height Above Board	0.271" (6.88mm)	0.334" (8.48mm)	CTS part is 0.063" taller; verify clearance
Length	0.659" (16.74mm)	0.686" (17.42mm)	CTS part is 0.027" longer; verify board layout
Electrical Life	2,000 Cycles	2,000 Cycles	Identical
Operating Temperature	-20°C ~ 70°C	-55°C ~ 85°C	CTS part has wider temperature range
Product Status	Obsolete	Active	CTS part is in active production
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	Identical

Engineering Selection Recommendations

The CTS Electrocomponents 208-6 is a qualified substitute for the obsolete DS06. Selection should be based on the following factors:

Product Status: The DS06 is obsolete, while the 208-6 is in active production. For new designs or ongoing production requiring long-term component availability, the 208-6 is the appropriate choice.

Electrical Equivalence: Both parts meet identical electrical specifications (SPST, 6 positions, 50mA, 24VDC, 2,000 cycle electrical life), ensuring functional compatibility in the circuit.

Mechanical Considerations: The 208-6 is slightly larger in height (0.334" vs. 0.271") and length (0.686" vs. 0.659"). Verify that the printed circuit board layout and enclosure clearances accommodate these dimensional differences before implementation.

Regulatory Compliance: Both parts are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements.

Temperature Range: The 208-6 operates across -55°C to 85°C, compared to the DS06's -20°C to 70°C range. The wider operating range of the 208-6 provides additional margin for applications with extended temperature requirements.

Frequently Asked Questions (FAQ)

Q: Can the CTS 208-6 be used as a direct replacement for the DS06 in existing designs?

A: Yes, the 208-6 is electrically and functionally equivalent. However, verify mechanical clearances due to the slightly larger physical dimensions (0.063" greater height, 0.027" greater length). Confirm that the printed circuit board layout and enclosure provide adequate space before substitution.

Q: Are there any differences in contact material or finish between these parts?

A: The DS06 specifies phosphor bronze contacts with gold finish. The 208-6 contact material is not specified in the available data, but the contact finish is tin. Consult the CTS 208-6 detailed datasheet to confirm contact material specifications if this is critical to your application.

Q: Do both parts have the same electrical life rating?

A: Yes, both the DS06 and 208-6 are rated for 2,000 cycles electrical life, ensuring equivalent performance in switching applications.

Q: What is the pitch specification for both parts?

A: Both parts use a 0.100" (2.54mm) pitch with full spacing, ensuring identical pin-to-pin distances and board layout compatibility.

Q: Is the 208-6 suitable for applications requiring extended temperature operation?

A: The 208-6 operates from -55°C to 85°C, providing a wider temperature range than the DS06 (-20°C to 70°C). This makes the 208-6 suitable for applications requiring extended temperature performance.

Q: Are both parts RoHS compliant?

A: Yes, both the DS06 and 208-6 are ROHS3 compliant and REACH unaffected, meeting current environmental regulations.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message