DRV83055PHP Equivalent & Substitute Parts

Part Overview

The DRV83055PHP is a multiphase motor driver IC manufactured by Texas Instruments, designed for three-phase BLDC and PMSM motor control applications. This Power MOSFET PWM controller operates across a 4.4V to 45V supply range and integrates commutation and direction management functions through PWM and SPI interfaces. The device is housed in a 48-HTQFP (7x7) surface mount package and maintains active product status with ROHS3 compliance. Substitute parts are identified when electrical specifications, functional capabilities, and mechanical packaging remain equivalent across the DRV8305 base product family.

Key Parameters

Parameter	Specification
Manufacturer	Texas Instruments
Category	Power Management (PMIC)
Function	Controller - Commutation, Direction Management
Motor Type	Multiphase
Applications	Three-Phase BLDC, PMSM Motors
Output Configuration	Pre-Driver - Half Bridge (3)
Interface	PWM, SPI
Technology	Power MOSFET
Voltage - Supply	4.4V ~ 45V
Operating Temperature	-40°C ~ 125°C (TA)
Package / Case	48-PowerTQFP
Supplier Device Package	48-HTQFP (7x7)
Mounting Type	Surface Mount
RoHS Status	ROHS3 Compliant
Moisture Sensitivity Level (MSL)	3 (168 Hours)

Substitute Part Grouping Explanation

Substitute parts for the DRV83055PHP are identified based on strict parametric equivalence within the DRV8305 base product family. All substitute candidates maintain identical electrical specifications: 4.4V to 45V supply voltage range, -40°C to 125°C operating temperature, three half-bridge pre-driver outputs, PWM and SPI interface support, and multiphase motor control functionality for BLDC and PMSM applications. All parts share the same 48-HTQFP (7x7) surface mount package and 48-PowerTQFP case designation.

Substitution is determined by the following key parameters:

Supply voltage range (4.4V ~ 45V)
Operating temperature range (-40°C ~ 125°C)
Output configuration (Pre-Driver - Half Bridge × 3)
Interface type (PWM, SPI)
Package type (48-HTQFP 7x7)
Base product family (DRV8305)
RoHS and environmental compliance status

Variations in packaging format (Tray vs. Tube) and automotive qualification (AEC-Q100) do not affect electrical substitutability but may impact procurement and application requirements.

Parameter Comparison

Part Number	Manufacturer	Voltage Supply	Operating Temp	Package	Packaging Format	Automotive Grade	Inventory (Pcs)
DRV83055PHP	Texas Instruments	4.4V ~ 45V	-40°C ~ 125°C	48-HTQFP (7x7)	Tray	No	863
DRV83053PHP	Texas Instruments	4.4V ~ 45V	-40°C ~ 125°C	48-HTQFP (7x7)	Tray	No	81,308
DRV83053QPHPQ1	Texas Instruments	4.4V ~ 45V	-40°C ~ 125°C	48-HTQFP (7x7)	Tube	Yes (AEC-Q100)	1,221
DRV8305NPHP	Texas Instruments	4.4V ~ 45V	-40°C ~ 125°C	48-HTQFP (7x7)	Tray	No	3,560
DRV8305NQPHPQ1	Texas Instruments	4.4V ~ 45V	-40°C ~ 125°C	48-HTQFP (7x7)	Tray	Yes (AEC-Q100)	66,080

Engineering Selection Recommendations

All listed substitute parts maintain full electrical and functional equivalence to the DRV83055PHP. Selection among substitutes should be based on application-specific requirements:

For non-automotive applications requiring standard industrial compliance, DRV83053PHP, DRV8305NPHP, and the original DRV83055PHP are suitable. These parts carry ROHS3 compliance and standard product status.

For automotive applications requiring AEC-Q100 qualification, DRV83053QPHPQ1 and DRV8305NQPHPQ1 are the appropriate selections. Both parts meet automotive-grade standards while maintaining identical electrical specifications and package compatibility.

Packaging format selection (Tray vs. Tube) depends on procurement and assembly workflow requirements. Tray packaging is standard for high-volume surface mount assembly, while Tube packaging may be preferred for lower-volume or manual handling scenarios.

Inventory availability should be considered for supply chain continuity. DRV8305NQPHPQ1 offers the highest stock level (66,080 units), followed by DRV83053PHP (81,308 units).

Frequently Asked Questions (FAQ)

Q: Can DRV83053PHP be used as a direct replacement for DRV83055PHP?

A: Yes. Both parts share identical electrical specifications, including 4.4V to 45V supply voltage, -40°C to 125°C operating temperature, three half-bridge pre-driver outputs, and 48-HTQFP (7x7) package. The only difference is packaging format (both use Tray). No circuit modifications are required.

Q: What is the difference between automotive-grade and standard-grade parts?

A: Automotive-grade parts (DRV83053QPHPQ1 and DRV8305NQPHPQ1) carry AEC-Q100 qualification, indicating compliance with automotive reliability and testing standards. Standard-grade parts lack this certification. Electrical performance is identical. Use automotive-grade parts only when AEC-Q100 certification is a design requirement.

Q: Are Tray and Tube packaging electrically equivalent?

A: Yes. Packaging format (Tray vs. Tube) affects only handling, storage, and assembly logistics. Electrical specifications and device performance are identical. Selection depends on manufacturing process requirements.

Q: Can I substitute a Tube-packaged part for a Tray-packaged part in production?

A: Substitution is possible if your assembly equipment supports Tube feeding. Verify compatibility with your pick-and-place system before implementing the change.

Q: Do all substitute parts meet RoHS3 compliance?

A: Yes. All listed parts, including the main part DRV83055PHP and all substitutes, carry ROHS3 compliance status. All parts are REACH Unaffected and classified as EAR99 for export control purposes.

Q: What is the Moisture Sensitivity Level (MSL) for these parts?

A: All parts carry MSL 3 rating with a 168-hour floor life. Standard moisture control procedures during storage and assembly are required.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message