DRV201YMBR Equivalent & Substitute Parts

Part Overview

The DRV201YMBR is a fully integrated motor driver IC manufactured by Texas Instruments, designed for voice coil motor applications in camera systems. This Power Management (PMIC) device operates across a 2.5V to 4.8V supply range and delivers 102.3mA output current through a half-bridge configuration. The part is currently in active production status with RoHS3 compliance and unlimited moisture sensitivity rating (MSL 1). Substitute parts are identified when design requirements necessitate alternative inventory sources or when specific procurement constraints require equivalent functionality.

Substiute Parts

DRV201YMBR

Texas InstrumentsIn Stock: 3153DRV201YMBR Datasheet

Current PartRFQ

DRV201AYMBR

Texas InstrumentsIn Stock: 1837DRV201AYMBR Datasheet

Parametric EquivalentRFQ

DRV201AYMBRB

Texas InstrumentsIn Stock: 3114DRV201AYMBRB Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the DRV201YMBR are identified based on parametric equivalence across all critical electrical and mechanical specifications. The substitution logic is based on the following key parameters that must remain identical:

• Voltage supply range: 2.5V ~ 4.8V
• Output current capability: 102.3mA
• Output configuration: Half Bridge
• Interface protocol: I2C
• Technology platform: NMOS, PMOS
• Package type: 6-XFBGA (6-PicoStar 0.8x1.48)
• Operating temperature range: -40°C ~ 125°C
• Motor application: Voice Coil Motor
• Compliance standards: RoHS3, REACH Unaffected

All substitute parts listed maintain identical specifications across these parameters, ensuring direct functional interchangeability in camera motor driver applications.

Parameter Comparison

Engineering Selection Recommendations

All three parts—DRV201YMBR, DRV201AYMBR, and DRV201AYMBRB—are manufactured by Texas Instruments and maintain active product status. Each part carries identical RoHS3 compliance certification and REACH unaffected status, meeting regulatory requirements for industrial and consumer applications. Selection between these parts should be based on inventory availability and procurement lead times, as all three deliver equivalent electrical performance and mechanical compatibility in voice coil motor driver applications.

Frequently Asked Questions (FAQ)

Q: Can DRV201AYMBR or DRV201AYMBRB be used as direct replacements for DRV201YMBR?

A: Yes. All three parts are parametrically equivalent across voltage supply range, output current, interface protocol, package configuration, and operating temperature specifications. Direct substitution is supported without circuit modification.

Q: Are there any differences in the 6-PicoStar package between these parts?

A: No. All three parts use the identical 6-XFBGA package with 6-PicoStar (0.8x1.48) dimensions. PCB layout and solder reflow profiles remain unchanged across all substitutes.

Q: Do all parts meet the same compliance standards?

A: Yes. DRV201YMBR, DRV201AYMBR, and DRV201AYMBRB are all RoHS3 compliant with MSL 1 (unlimited) moisture sensitivity rating and REACH unaffected status.

Q: What is the basis for substitution between these parts?

A: Substitution is based on identical electrical specifications including 2.5V to 4.8V supply voltage, 102.3mA output current, half-bridge output configuration, I2C interface, and -40°C to 125°C operating temperature range. All parts are designed for voice coil motor applications in camera systems.

Q: Are there inventory differences between the substitute parts?

A: Yes. DRV201YMBR has 3100 pcs in stock, DRV201AYMBR has 1741 pcs, and DRV201AYMBRB has 3010 pcs. Inventory levels may influence procurement decisions based on project timelines and volume requirements.