DRV10975ZPWPR Equivalent & Substitute Parts

Part Overview

The DRV10975ZPWPR is an integrated motor driver IC from Texas Instruments designed for brushless DC (BLDC) motor applications in appliance systems. This fully integrated driver combines control and power stage functionality with Power MOSFET technology, operating across a 6.5V to 18V supply range with 1.5A output current capability. The device is Active in product status and widely stocked, making it a standard component for BLDC motor control applications requiring analog, I2C, and PWM interface options.

Substitute parts are identified when equivalent electrical performance, mechanical compatibility, and compliance certifications are maintained across the same base product family, differing only in packaging or distribution format.

Substiute Parts

DRV10975ZPWPR

Texas InstrumentsIn Stock: 3687DRV10975ZPWPR Datasheet

Current PartRFQ

DRV10975PWPR

Texas InstrumentsIn Stock: 3355DRV10975PWPR Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the DRV10975ZPWPR are identified within the DRV10975 base product family where the following critical parameters remain identical:

Motor control function (Brushless DC driver), output configuration (Half Bridge with 3 outputs), interface capability (Analog, I2C, PWM), power stage technology (Power MOSFET), electrical ratings (1.5A output, 6.5V–18V supply and load voltage), thermal operating range (-40°C to 125°C), package form factor (24-PowerTSSOP), and regulatory compliance (ROHS3, REACH Unaffected).

Substitution is permitted when packaging format differs (Tape & Reel versus Cut Tape) while maintaining identical electrical performance and mechanical compatibility. The DRV10975PWPR qualifies as a parametric equivalent under these criteria.

Parameter Comparison

Engineering Selection Recommendations

Both the DRV10975ZPWPR and DRV10975PWPR maintain Active product status with full regulatory compliance (ROHS3 and REACH Unaffected). Selection between these parts is determined by packaging and supply chain requirements rather than electrical or functional differences.

The DRV10975ZPWPR in Tape & Reel format is suitable for high-volume automated assembly operations. The DRV10975PWPR in Cut Tape format accommodates lower-volume production runs or manual assembly workflows. Both parts carry identical MSL 2 moisture sensitivity ratings with one-year shelf life under controlled storage conditions.

Component selection should be based on procurement volume, assembly process capability, and inventory management strategy. No electrical re-qualification is required when transitioning between these packaging formats within the same base product family.

Frequently Asked Questions (FAQ)

Q: Can DRV10975PWPR be used as a direct replacement for DRV10975ZPWPR in production?

A: Yes. Both parts are electrically and mechanically identical. The only difference is packaging format (Cut Tape versus Tape & Reel). No circuit redesign or functional testing is required for substitution.

Q: What is the difference between Tape & Reel and Cut Tape packaging?

A: Tape & Reel packaging supplies components on continuous carrier tape wound on reels, optimized for automated pick-and-place assembly at high volumes. Cut Tape packaging provides the same components on shorter tape segments, suitable for lower-volume or manual assembly processes. Both formats use identical 24-PowerTSSOP package geometry.

Q: Are there any compliance or certification differences between these parts?

A: No. Both parts carry identical ROHS3 compliance and REACH Unaffected status. Moisture sensitivity level (MSL 2, 1 Year) is identical for both packaging formats.

Q: What are the key parameters that define substitution eligibility for DRV10975 variants?

A: Substitution is valid when the following parameters match: base product number (DRV10975), motor type (Brushless DC), output configuration (Half Bridge 3), interface (Analog, I2C, PWM), power stage technology (Power MOSFET), current rating (1.5A), supply voltage range (6.5V–18V), load voltage range (6.5V–18V), operating temperature range (-40°C to 125°C), and package form factor (24-PowerTSSOP). Packaging format (Tape & Reel or Cut Tape) does not affect substitution eligibility.

Q: Can these parts be used interchangeably in existing designs without PCB layout changes?

A: Yes. Both parts use the identical 24-PowerTSSOP package with 0.173" width and 4.40mm dimensions. PCB footprints, pin assignments, and thermal characteristics are identical. No layout modifications are required.

Q: What inventory considerations apply when selecting between these parts?

A: DRV10975ZPWPR (Tape & Reel) is typically stocked in larger quantities for high-volume applications. DRV10975PWPR (Cut Tape) may offer shorter lead times for smaller orders. Verify current inventory levels with your supplier, as availability varies by distribution channel and order volume.