DRC3114T0L Equivalent & Substitute Parts

Part Overview

The DRC3114T0L is a pre-biased NPN bipolar junction transistor (BJT) manufactured by Panasonic Electronic Components. This surface mount device is rated for 50 V collector-emitter breakdown voltage with a maximum collector current of 100 mA and 100 mW power dissipation. The part is packaged in SOT-723 (SSSMini3-F2-B) form factor and features a 10 kOhm base resistor for integrated biasing functionality.

The DRC3114T0L is discontinued at DiGi Electronics. Equivalent and substitute parts are available from active manufacturers including onsemi and Rohm Semiconductor, offering improved availability while maintaining electrical and mechanical compatibility within specified parameter ranges.

Key Parameters

Parameter	Value	Unit
Transistor Type	NPN - Pre-Biased	—
Voltage - Collector Emitter Breakdown (Max)	50	V
Current - Collector (Ic) (Max)	100	mA
Power - Max	100	mW
Resistor - Base (R1)	10	kOhms
DC Current Gain (hFE) (Min) @ Ic, Vce	160 @ 5mA, 10V	—
Vce Saturation (Max) @ Ib, Ic	250mV @ 500µA, 10mA	—
Current - Collector Cutoff (Max)	500	nA
Package / Case	SOT-723	—
Mounting Type	Surface Mount	—
RoHS Status	RoHS Compliant	—
Moisture Sensitivity Level (MSL)	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitute parts for the DRC3114T0L are classified based on electrical parameter compatibility and mechanical form factor alignment. The substitution logic is structured around the following critical parameters:

Electrical Compatibility Criteria:

Voltage - Collector Emitter Breakdown (Max): 50 V minimum
Current - Collector (Ic) (Max): 100 mA minimum
Resistor - Base (R1): 10 kOhms (primary biasing configuration)
Current - Collector Cutoff (Max): 500 nA maximum
Transistor Type: NPN - Pre-Biased

Mechanical Compatibility Criteria:

Package / Case: SOT-723 or equivalent surface mount package
Mounting Type: Surface Mount
Moisture Sensitivity Level (MSL): 1 (Unlimited)

Compliance Criteria:

RoHS Status: RoHS3 Compliant or equivalent
ECCN: EAR99

Substitute parts are grouped into two categories: Direct Equivalents (matching all primary electrical and mechanical parameters) and Similar Alternatives (meeting core electrical requirements with acceptable parameter variations for specific applications).

Parameter Comparison

Parameter	DRC3114T0L (Panasonic)	DTC114TM3T5G (onsemi)	DTC014TMT2L (Rohm)	DTC114EM3T5G (onsemi)	DTC114TMT2L (Rohm)	DTC114YM3T5G (onsemi)	NSBC114TF3T5G (onsemi)
Transistor Type	NPN - Pre-Biased	NPN - Pre-Biased	NPN - Pre-Biased	NPN - Pre-Biased	NPN - Pre-Biased	NPN - Pre-Biased	NPN - Pre-Biased
Voltage - Collector Emitter Breakdown (Max)	50 V	50 V	50 V	50 V	50 V	50 V	50 V
Current - Collector (Ic) (Max)	100 mA	100 mA	100 mA	100 mA	100 mA	100 mA	100 mA
Resistor - Base (R1)	10 kOhms	10 kOhms	10 kOhms	10 kOhms	10 kOhms	10 kOhms	10 kOhms
DC Current Gain (hFE) (Min) @ Ic, Vce	160 @ 5mA, 10V	160 @ 5mA, 10V	100 @ 5mA, 10V	35 @ 5mA, 10V	100 @ 1mA, 5V	80 @ 5mA, 10V	160 @ 5mA, 10V
Vce Saturation (Max) @ Ib, Ic	250mV @ 500µA, 10mA	250mV @ 1mA, 10mA	150mV @ 500µA, 5mA	250mV @ 300µA, 10mA	300mV @ 1mA, 10mA	250mV @ 300µA, 10mA	250mV @ 1mA, 10mA
Current - Collector Cutoff (Max)	500 nA	500 nA	500 nA	500 nA	500 nA	500 nA	500 nA
Power - Max	100 mW	260 mW	150 mW	260 mW	150 mW	260 mW	254 mW
Package / Case	SOT-723	SOT-723	SOT-723	SOT-723	SOT-723	SOT-723	SOT-1123
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount	Surface Mount
RoHS Status	RoHS Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant	ROHS3 Compliant
Product Status	Discontinued	Active	Active	Active	Active	Active	Last Time Buy

Engineering Selection Recommendations

Primary Recommendation: DTC114TM3T5G (onsemi)

The DTC114TM3T5G is the optimal direct equivalent for the DRC3114T0L. This part maintains identical electrical specifications including 50 V breakdown voltage, 100 mA maximum collector current, 10 kOhm base resistor, and 160 minimum DC current gain at specified test conditions. The part is packaged in SOT-723 surface mount form factor with MSL 1 rating. Product status is Active with ROHS3 compliance and REACH unaffected designation. Inventory availability is 45,300 units. Packaging is supplied as Tape & Reel (TR).

Secondary Recommendation: DTC114TMT2L (Rohm Semiconductor)

The DTC114TMT2L provides electrical compatibility with acceptable parameter variations. This part meets the 50 V breakdown voltage and 100 mA collector current requirements with 10 kOhm base resistor configuration. DC current gain is specified at 100 minimum (versus 160 for the primary part), and Vce saturation is 300 mV maximum at 1 mA, 10 mA test conditions. The part includes 250 MHz transition frequency specification. Product status is Active with ROHS3 compliance. Inventory availability is 125,300 units. Packaging is supplied as Cut Tape (CT) & Digi-Reel.

Alternative Consideration: DTC114YM3T5G (onsemi)

The DTC114YM3T5G maintains core electrical compatibility with 50 V breakdown voltage and 100 mA collector current. This part features a 47 kOhm emitter-base resistor (R2) in addition to the 10 kOhm base resistor, resulting in a lower DC current gain of 80 minimum at specified test conditions. This configuration is suitable for applications requiring reduced gain characteristics. Product status is Active with ROHS3 compliance. Inventory availability is 24,490 units.

Not Recommended for Direct Substitution: DTC114EM3T5G (onsemi)

The DTC114EM3T5G exhibits significantly reduced DC current gain of 35 minimum at 5 mA, 10 V test conditions, representing a substantial deviation from the DRC3114T0L specification of 160 minimum. While electrical ratings for voltage and current are maintained, the gain reduction may require circuit redesign. This part is suitable only for applications where lower gain is acceptable or required.

Not Recommended: NSBC114TF3T5G (onsemi)

The NSBC114TF3T5G is packaged in SOT-1123 form factor, which differs from the SOT-723 package of the DRC3114T0L. Product status is Last Time Buy, indicating limited future availability. This part is not recommended for new designs or long-term production applications.

Frequently Asked Questions (FAQ)

Q: Can DTC114TM3T5G be used as a direct replacement for DRC3114T0L?

A: Yes. The DTC114TM3T5G meets all electrical and mechanical specifications of the DRC3114T0L. Both parts are rated for 50 V collector-emitter breakdown voltage, 100 mA maximum collector current, feature 10 kOhm base resistor biasing, and are packaged in SOT-723 surface mount form factor. DC current gain specifications are identical at 160 minimum. The part is in Active product status with ROHS3 compliance.

Q: What is the difference between DTC114TM3T5G and DTC114TMT2L?

A: Both parts meet the core electrical requirements of 50 V breakdown voltage and 100 mA collector current with 10 kOhm base resistor. The primary differences are: (1) DTC114TM3T5G is manufactured by onsemi with 160 minimum DC current gain; DTC114TMT2L is manufactured by Rohm with 100 minimum DC current gain; (2) DTC114TMT2L includes 250 MHz transition frequency specification; (3) Vce saturation specifications differ at different test conditions; (4) DTC114TMT2L is supplied in Cut Tape & Digi-Reel packaging while DTC114TM3T5G is supplied as Tape & Reel.

Q: Why is DTC114EM3T5G not recommended as a substitute?

A: The DTC114EM3T5G has a DC current gain specification of 35 minimum at 5 mA, 10 V, which is substantially lower than the DRC3114T0L specification of 160 minimum. This represents a 78% reduction in gain and may require circuit redesign to maintain intended functionality. The part is suitable only for applications where lower gain is acceptable or specifically required.

Q: Are all substitute parts RoHS compliant?

A: All substitute parts listed are ROHS3 compliant. The original DRC3114T0L is RoHS compliant. All parts meet environmental compliance requirements for lead-free manufacturing and hazardous substance restrictions.

Q: What is the package difference between SOT-723 and SOT-1123?

A: SOT-723 and SOT-1123 are distinct surface mount package types with different physical dimensions and pin configurations. The DRC3114T0L and recommended substitutes use SOT-723 packaging. The NSBC114TF3T5G uses SOT-1123 packaging and is not recommended for direct substitution due to package incompatibility with existing PCB layouts.

Q: What does MSL 1 (Unlimited) mean for moisture sensitivity?

A: MSL 1 (Unlimited) indicates that the component has unlimited shelf life under normal storage conditions without requiring special moisture control measures. All listed parts carry MSL 1 rating, meaning they can be stored and handled without desiccant packaging or moisture barrier requirements.

Q: Can DTC114YM3T5G be used in place of DRC3114T0L?

A: DTC114YM3T5G can be used in applications where the reduced DC current gain of 80 minimum is acceptable. This part includes a 47 kOhm emitter-base resistor (R2) in addition to the 10 kOhm base resistor, which modifies the biasing network. The part meets voltage and current ratings but requires evaluation for specific circuit requirements due to the gain reduction.

Q: What is the inventory status of substitute parts?

A: DTC114TM3T5G has 45,300 units in stock. DTC114TMT2L has 125,300 units in stock. DTC014TMT2L has 85,400 units in stock. DTC114EM3T5G has 105,400 units in stock. DTC114YM3T5G has 24,490 units in stock. NSBC114TF3T5G has 611 units in stock. All substitute parts are available from active manufacturers with established supply chains.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message