DRC2143Y0L Equivalent & Substitute Parts

Part Overview

The DRC2143Y0L is a pre-biased NPN bipolar junction transistor (BJT) manufactured by Panasonic Electronic Components. This surface mount device is rated for 50 V collector-emitter breakdown voltage and 100 mA maximum collector current, with integrated base and emitter-base resistors for simplified circuit design. The part is packaged in MINI3-G3-B (SOT-23-3) configuration and rated for 200 mW maximum power dissipation.

The DRC2143Y0L is discontinued at DiGi Electronics. Equivalent and substitute parts are available from multiple manufacturers with identical or superior electrical characteristics and active product status, enabling direct replacement in new designs and production continuity.

Key Parameters

Parameter	Value	Unit
Transistor Type	NPN - Pre-Biased	—
Current - Collector (Ic) Max	100	mA
Voltage - Collector Emitter Breakdown (Max)	50	V
Resistor - Base (R1)	4.7	kOhms
Resistor - Emitter Base (R2)	22	kOhms
Power - Max	200	mW
Package / Case	TO-236-3, SC-59, SOT-23-3	—
Mounting Type	Surface Mount	—
RoHS Status	ROHS3 Compliant	—
Moisture Sensitivity Level (MSL)	1 (Unlimited)	—

Substitute Part Grouping Explanation

Substitution of the DRC2143Y0L is determined by strict equivalence of the following electrical and mechanical parameters:

Critical Matching Parameters:

Transistor type: NPN - Pre-Biased
Maximum collector current: 100 mA
Maximum collector-emitter breakdown voltage: 50 V
Base resistor (R1): 4.7 kOhms
Package type: SOT-23-3 (TO-236-3, SC-59)
Mounting type: Surface Mount
RoHS3 compliance
MSL rating: 1 (Unlimited)

Allowable Variations:

Emitter-base resistor (R2): 10 kOhms to 47 kOhms (affects biasing characteristics)
DC current gain (hFE): 15 to 100 @ specified test conditions
Vce saturation: 100 mV to 300 mV @ specified test conditions
Collector cutoff current: 100 nA to 1 µA
Transition frequency: 140 MHz to 250 MHz (when specified)
Maximum power dissipation: 200 mW to 250 mW

All substitute parts listed maintain electrical compatibility within the specified parameter ranges and are available in active or last-time-buy product status with full RoHS3 compliance.

Parameter Comparison

Manufacturer Part Number	Manufacturer	Ic (Max) mA	Vce(br) V	R1 kOhms	R2 kOhms	hFE (Min)	Vce Sat (Max) mV	Power (Max) mW	Product Status	Package
DRC2143Y0L	Panasonic	100	50	4.7	22	60	250	200	Discontinued	MINI3-G3-B
DDTC143FCA-7-F	Diodes Incorporated	100	50	4.7	22	68	300	200	Active	SOT-23-3
BCR112E6327HTSA1	Infineon Technologies	100	50	4.7	4.7	20	300	200	Last Time Buy	PG-SOT23
BCR116E6327HTSA1	Infineon Technologies	100	50	4.7	47	70	300	200	Last Time Buy	PG-SOT23
DTC143ZKAT146	Rohm Semiconductor	100	50	4.7	47	80	300	200	Active	SMT3
MMUN2217LT1G	onsemi	100	50	4.7	10	35	250	246	Active	SOT-23-3
MMUN2232LT1G	onsemi	100	50	4.7	4.7	15	250	246	Active	SOT-23-3
PDTC143ZT,215	Nexperia USA Inc.	100	50	4.7	47	100	100	250	Active	TO-236AB

Engineering Selection Recommendations

Primary Recommendation: DDTC143FCA-7-F (Diodes Incorporated)

The DDTC143FCA-7-F provides direct electrical equivalence to the DRC2143Y0L with identical base and emitter-base resistor values (4.7 kOhms and 22 kOhms respectively). This part is in active product status with high inventory availability (178,990 units), ensuring long-term supply continuity. RoHS3 compliance and MSL 1 rating match the original specification. The part is supplied in standard SOT-23-3 packaging compatible with existing PCB layouts.

Secondary Recommendation: DTC143ZKAT146 (Rohm Semiconductor)

The DTC143ZKAT146 offers active product status with the highest inventory level (938,400 units) and superior electrical performance characteristics. While the emitter-base resistor differs (47 kOhms versus 22 kOhms), this variation remains within allowable substitution parameters and results in modified biasing characteristics suitable for most applications. The part features 250 MHz transition frequency and 300 mV maximum saturation voltage. RoHS3 and REACH compliance are confirmed.

Alternative Recommendation: PDTC143ZT,215 (Nexperia USA Inc.)

The PDTC143ZT,215 is qualified to AEC-Q100 automotive standards and provides the highest DC current gain (100 @ 10mA, 5V) and lowest saturation voltage (100 mV). This part is suitable for applications requiring enhanced performance margins or automotive-grade reliability. Active product status and 250 mW maximum power rating provide design flexibility.

Considerations for Last-Time-Buy Parts:

BCR112E6327HTSA1 and BCR116E6327HTSA1 (Infineon Technologies) are available in last-time-buy status. These parts maintain full electrical compatibility but offer limited future availability. Selection should be based on immediate project requirements only.

Frequently Asked Questions (FAQ)

Q: Can DDTC143FCA-7-F directly replace DRC2143Y0L without circuit modification?

A: Yes. The DDTC143FCA-7-F maintains identical base resistor (4.7 kOhms) and emitter-base resistor (22 kOhms) values, ensuring equivalent biasing behavior. The SOT-23-3 package is mechanically and electrically compatible with the original MINI3-G3-B package. No circuit modifications are required.

Q: What is the impact of different emitter-base resistor values on circuit performance?

A: The emitter-base resistor (R2) affects the biasing network and input impedance characteristics. Variations from 10 kOhms to 47 kOhms remain within acceptable substitution parameters. Lower R2 values (10 kOhms) increase input current sensitivity; higher values (47 kOhms) reduce input current requirements. Circuit simulation or testing is recommended if the application has strict biasing specifications.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All substitute parts listed in this reference maintain ROHS3 compliance and MSL 1 (Unlimited) moisture sensitivity rating, matching the original DRC2143Y0L specification.

Q: Which substitute part offers the best long-term availability?

A: DTC143ZKAT146 (Rohm Semiconductor) provides the highest inventory level (938,400 units) and active product status, ensuring sustained availability for production and future design revisions.

Q: Can parts in last-time-buy status be used for new production designs?

A: Last-time-buy parts (BCR112E6327HTSA1 and BCR116E6327HTSA1) are suitable only for existing production runs with defined end-of-life dates. New designs should utilize parts with active product status to ensure supply continuity beyond the last-time-buy window.

Q: What is the difference between SOT-23-3, MINI3-G3-B, and PG-SOT23 packages?

A: These designations refer to the same physical package form factor (TO-236-3, SC-59) with identical pin configurations and PCB footprints. Supplier device package names vary by manufacturer but are mechanically and electrically interchangeable for surface mount assembly.

Q: Is automotive qualification required for this application?

A: Automotive qualification (AEC-Q100) is required only if the application operates in automotive environments. PDTC143ZT,215 is the only part in this reference with AEC-Q100 qualification. Standard industrial-grade parts are suitable for non-automotive applications.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message