DR2260D30U Equivalent & Substitute Parts

Part Overview

The DR2260D30U is a Solid State Relay (SSR) manufactured by Sensata-Crydom, classified as a SPST-NO (1 Form A) relay with integrated heat sink. This component is designed for AC load switching applications with zero-cross detection, operating with DC control inputs and AC output loads. The part is currently Active in product status and is RoHS3 Compliant with REACH Affected designation.

Equivalent and substitute parts are identified when they maintain functional compatibility across critical electrical and mechanical parameters, including input voltage range, output voltage range, load current capacity, circuit configuration, and mounting compatibility.

Substiute Parts

DR2260D30U

Sensata-CrydomIn Stock: 851DR2260D30U Datasheet

Current PartRFQ

GNR30DCZH

CrouzetIn Stock: 965GNR30DCZH Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the DR2260D30U is determined by strict equivalence across the following critical parameters:

• Circuit Configuration: Must be SPST-NO (1 Form A) to maintain identical switching topology
• Load Current Rating: Must be rated for 30 A minimum to handle specified load requirements
• Input Voltage Range: Must accommodate 4 ~ 32VDC control signal range
• Output Voltage Range: Must support minimum 48 V ~ 600 V load voltage envelope
• Output Type: Must feature AC switching with zero-cross detection for synchronized load control
• Termination Style: Must use Screw Terminal for direct connection compatibility
• Mounting Compatibility: Must support DIN Rail mounting or equivalent chassis mount configurations

The GNR30DCZH from Crouzet meets these substitution criteria with compatible electrical ratings and mechanical mounting options.

Parameter Comparison

Engineering Selection Recommendations

Both the DR2260D30U and GNR30DCZH are Active products with current manufacturer support. Selection between these parts should be based on the following factors:

DR2260D30U (Sensata-Crydom): Integrated heat sink design provides passive thermal management within the component package. ROHS3 Compliant status indicates compliance with the most current RoHS directive revision. REACH Affected designation requires verification of specific substance restrictions in your application jurisdiction.

GNR30DCZH (Crouzet): Modular design with flexible mounting options (Chassis Mount and DIN Rail). Output voltage rating extends to 660 V, providing additional margin above the 600 V minimum requirement. RoHS Compliant status confirms environmental directive adherence. REACH Unaffected designation eliminates substance restriction considerations.

Both parts maintain identical electrical performance across input voltage, load current, and circuit configuration parameters. The choice between them depends on thermal management strategy, mounting flexibility requirements, and regulatory compliance scope in your target market.

Frequently Asked Questions (FAQ)

Q: Can GNR30DCZH directly replace DR2260D30U in existing installations?

A: Electrical compatibility is confirmed across all critical parameters: input voltage (4 ~ 32VDC), load current (30 A), circuit configuration (SPST-NO), and output type (AC, Zero Cross). Physical mounting compatibility requires verification of DIN Rail slot dimensions and screw terminal pitch. The GNR30DCZH supports DIN Rail mounting, but the modular package form factor differs from the integrated heat sink design of the DR2260D30U.

Q: What is the significance of the output voltage rating difference (600 V vs. 660 V)?

A: The GNR30DCZH is rated for 48 V ~ 660 V output, while the DR2260D30U is rated for 48 V ~ 600 V. This means the GNR30DCZH can operate at higher load voltages within its specified range. For applications operating at or below 600 V, both parts are functionally equivalent. For applications requiring operation between 600 V and 660 V, only the GNR30DCZH is suitable.

Q: Are there thermal management differences between these parts?

A: The DR2260D30U features an integrated heat sink within its SSR package, providing passive thermal dissipation. The GNR30DCZH is a modular design without integrated heat sink. Thermal performance depends on ambient conditions, load current, and duty cycle. Applications requiring passive heat dissipation should verify that the GNR30DCZH's thermal characteristics meet requirements, or implement external heat management solutions.

Q: What are the packaging and inventory implications?

A: DR2260D30U is supplied in Bulk packaging with 819 pieces in stock. GNR30DCZH is supplied in Box packaging with 923 pieces in stock. Packaging format may affect handling, storage, and integration into assembly processes.

Q: Are there compliance differences between these parts?

A: Both parts are RoHS Compliant. The DR2260D30U is ROHS3 Compliant (latest revision), while GNR30DCZH is RoHS Compliant (general designation). The DR2260D30U is REACH Affected, requiring verification of substance restrictions. The GNR30DCZH is REACH Unaffected, eliminating substance restriction considerations. Verify compliance requirements for your specific application and target market.