DPL06TVAM Equivalent & Substitute Parts

Part Overview

The DPL06TVAM is a 6-position DIP switch manufactured by APEM Inc., featuring SPST (Single Pole Single Throw) circuit configuration with piano actuator and through-hole right-angle mounting. This component is rated for 50mA at 24VDC and is designed for applications requiring reliable switching in compact form factors. The product is currently obsolete, making identification of functionally equivalent alternatives necessary for ongoing system support and new design implementations.

Substiute Parts

DPL06TVAM

APEM Inc.In Stock: 971DPL06TVAM Datasheet

Current PartRFQ

NDPL-06T-V

APEM Inc.In Stock: 772NDPL-06T-V Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the DPL06TVAM is determined by the following critical parameters:

• Circuit Configuration: Must be SPST to maintain single-pole switching functionality
• Number of Positions: Must be 6 to ensure pin-count compatibility
• Voltage Rating: Must support 24VDC operation
• Mounting Type: Must be through-hole, right-angle to fit existing PCB layouts
• Pitch: Must be 0.100" (2.54mm) for footprint compatibility
• Actuator Type: Must be piano actuator with raised level for user interface consistency
• Height Above Board: Must be 0.402" (10.20mm) to maintain clearance specifications

The NDPL-06T-V meets all mandatory substitution criteria. While the current rating differs (25mA versus 50mA), this represents a derating that maintains compatibility with the original 24VDC, 6-position SPST configuration and physical form factor.

Parameter Comparison

Engineering Selection Recommendations

The NDPL-06T-V is the qualified substitute for the obsolete DPL06TVAM. Both components are manufactured by APEM Inc. and maintain identical mechanical and electrical interface specifications. The NDPL-06T-V carries active product status, ensuring continued availability and supply chain support.

Both parts maintain ROHS3 compliance and REACH unaffected status, satisfying regulatory requirements for current manufacturing environments. The MSL rating of 1 (Unlimited) for both components indicates no moisture sensitivity constraints during storage or handling.

The primary design consideration is the current rating differential: the NDPL-06T-V is rated for 25mA compared to the original 50mA specification. This derating is acceptable for applications where the actual switching current does not exceed 25mA at 24VDC. Applications requiring the full 50mA capacity must evaluate alternative suppliers or confirm that load current remains within the substitute part's rating.

Frequently Asked Questions (FAQ)

Q: Can the NDPL-06T-V directly replace the DPL06TVAM in existing designs?

A: Yes, from a mechanical and electrical interface perspective. The NDPL-06T-V maintains identical pitch (0.100"), height (0.402"), mounting type (through-hole right-angle), and circuit configuration (SPST 6-position). The primary consideration is current rating: if your application draws more than 25mA per switch position, the NDPL-06T-V cannot be used.

Q: What is the significance of the current rating difference?

A: The DPL06TVAM is rated for 50mA at 24VDC, while the NDPL-06T-V is rated for 25mA at 24VDC. This means the substitute part can safely switch loads up to 25mA. If your circuit requires switching higher currents, the NDPL-06T-V will not meet the electrical requirements.

Q: Are there any compliance or certification differences?

A: No. Both parts are ROHS3 compliant, REACH unaffected, and carry MSL rating 1 (Unlimited). Regulatory and environmental compliance is equivalent.

Q: Why is the DPL06TVAM obsolete?

A: The DPL06TVAM has been discontinued by APEM Inc. The NDPL-06T-V represents the active product line continuation for 6-position SPST DIP switches in this form factor.

Q: Are the physical dimensions identical?

A: The critical dimensions are identical: pitch (0.100"), height above board (0.402"), and mounting type (through-hole right-angle). The NDPL-06T-V length is 0.650" compared to 0.661" for the DPL06TVAM, a difference of 0.011" that does not affect PCB footprint compatibility.

Q: What is the mechanical life specification for the NDPL-06T-V?

A: The mechanical life specification is not provided in the product data. The electrical life is specified as 2,000 cycles, matching the original DPL06TVAM.