DPL06T Equivalent & Substitute Parts

Part Overview

The DPL06T is a 6-position DIP switch manufactured by APEM Inc., featuring SPST (Single Pole Single Throw) circuitry with a piano actuator and through-hole right-angle mounting. This component is rated for 50mA at 24VDC and is designed for applications requiring reliable switching in compact form factors. The DPL06T is classified as obsolete, making identification of functionally equivalent alternatives necessary for ongoing design support and procurement planning.

Substiute Parts

DPL06T

APEM Inc.In Stock: 1154DPL06T Datasheet

Current PartRFQ

NDPL-06T-V

APEM Inc.In Stock: 772NDPL-06T-V Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the DPL06T is determined by the following critical parameters:

• Circuit Configuration: Must be SPST to maintain identical switching behavior
• Number of Positions: Must be 6 to ensure PCB layout compatibility
• Voltage Rating: Must support 24VDC operation
• Mounting Type: Must be through-hole, right-angle to fit existing board designs
• Pitch: Must be 0.100" (2.54mm) for footprint compatibility
• Actuator Type: Must be piano actuator for consistent user interface
• Contact Finish: Gold finish ensures reliable electrical contact

The NDPL-06T-V qualifies as a substitute based on matching all critical parameters. However, the current rating differs at 25mA versus the original 50mA specification, which represents a functional limitation that must be evaluated against actual circuit requirements.

Parameter Comparison

Engineering Selection Recommendations

The NDPL-06T-V is an active product from APEM Inc. and maintains full compliance with ROHS3 and REACH requirements, making it suitable for new procurement where the DPL06T is no longer available. The substitute shares identical mechanical and electrical interface characteristics, ensuring direct PCB compatibility without layout modifications.

The primary consideration for selection is the reduced current rating of 25mA in the NDPL-06T-V compared to the original 50mA specification. This substitution is appropriate only when circuit current requirements do not exceed 25mA per switch position. For applications requiring the full 50mA capacity, alternative sources or design modifications must be evaluated.

Frequently Asked Questions (FAQ)

Q: Can the NDPL-06T-V be used as a direct replacement for the DPL06T?

A: The NDPL-06T-V provides mechanical and electrical interface compatibility, including identical mounting, pitch, and actuator characteristics. However, the reduced current rating of 25mA versus 50mA must be verified against actual circuit requirements before substitution.

Q: Are there any PCB layout changes required when switching from DPL06T to NDPL-06T-V?

A: No PCB layout changes are required. Both parts share identical mounting type (through-hole, right-angle), pitch (0.100"), and height above board (0.402"), ensuring direct footprint compatibility.

Q: What is the significance of the product status difference?

A: The DPL06T is classified as obsolete, indicating it is no longer manufactured or supported by APEM Inc. The NDPL-06T-V is an active product with ongoing manufacturing and technical support availability.

Q: Do both parts meet current regulatory requirements?

A: Yes. Both the DPL06T and NDPL-06T-V are ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory standards.

Q: What is the critical difference between these two parts?

A: The current rating is the primary electrical difference. The DPL06T is rated for 50mA, while the NDPL-06T-V is rated for 25mA. All other electrical and mechanical parameters are equivalent.