DPG30C200PC-TRL Equivalent & Substitute Parts

Part Overview

The DPG30C200PC-TRL is a diode array rectifier manufactured by IXYS in the HiPerFRED™ series. This component is a 1 Pair Common Cathode configuration rated for 200 V DC reverse voltage and 15 A average rectified current per diode. The part is housed in a TO-263-3 D2PAK surface mount package and is classified as Active product status with ROHS3 compliance.

Substitute parts are identified when equivalent electrical performance can be achieved within the specified parameter ranges while maintaining the same package form factor and mounting technology. Alternative models become necessary when the primary part reaches end-of-life status, inventory constraints occur, or design flexibility is required across multiple qualified suppliers.

Key Parameters

Parameter	Value	Unit
Voltage - DC Reverse (Vr) (Max)	200	V
Current - Average Rectified (Io) (per Diode)	15	A
Voltage - Forward (Vf) (Max) @ If	1.26 V @ 15 A	V
Reverse Recovery Time (trr)	35	ns
Current - Reverse Leakage @ Vr	1	µA @ 200 V
Operating Temperature - Junction	-55 to 175	°C
Diode Configuration	1 Pair Common Cathode	—
Package / Case	TO-263-3, D2PAK (2 Leads + Tab), TO-263AB	—
Mounting Type	Surface Mount	—
Speed Classification	Fast Recovery ≤ 500ns, > 200mA (Io)	—
RoHS Status	ROHS3 Compliant	—

Substitute Part Grouping Explanation

Substitution eligibility is determined by the following criteria applied strictly to the provided parameters:

Primary Substitution Criteria:

Voltage - DC Reverse (Vr) (Max): Must equal 200 V
Diode Configuration: Must be 1 Pair Common Cathode
Package / Case: Must be TO-263-3, D2PAK (2 Leads + Tab), TO-263AB
Mounting Type: Must be Surface Mount
Speed Classification: Must be Fast Recovery ≤ 500ns, > 200mA (Io)
RoHS Status: Must be ROHS3 Compliant

Secondary Substitution Criteria:

Current - Average Rectified (Io) (per Diode): Substitute parts with equal or greater current rating are functionally compatible
Voltage - Forward (Vf) (Max): Lower forward voltage indicates improved efficiency; higher values remain acceptable within circuit design margins
Reverse Recovery Time (trr): Faster recovery time indicates superior switching performance; slower values remain acceptable for standard rectification applications
Current - Reverse Leakage @ Vr: Lower leakage indicates superior blocking characteristics; higher values remain acceptable within circuit design margins
Operating Temperature - Junction: Extended temperature range provides design flexibility; narrower ranges remain acceptable if circuit operating conditions are within specified limits

All substitute parts listed meet the primary criteria. Current rating variations are noted to enable selection based on specific application requirements.

Parameter Comparison

Part Number	Manufacturer	Vr (Max) [V]	Io (per Diode) [A]	Vf (Max) [V]	trr [ns]	Ir @ Vr [µA]	Tj (Max) [°C]	Package	Packaging Type
DPG30C200PC-TRL	IXYS	200	15	1.26 @ 15 A	35	1 @ 200 V	175	TO-263-3, D2PAK	Tape & Reel (TR)
FFB20UP20DN-F085	onsemi	200	10	1.15 @ 10 A	40	10 @ 200 V	175	TO-263-3, D2PAK	Tape & Reel (TR)
SBR10200CTB	Diodes Incorporated	200	5	0.92 @ 5 A	20	5 @ 200 V	175	TO-263-3, D2PAK	Tube
SBR10200CTB-13-G	Diodes Incorporated	200	5	0.92 @ 5 A	20	5 @ 200 V	175	TO-263-3, D2PAK	Tape & Reel (TR)
SBR20A200CTB	Diodes Incorporated	200	10	0.96 @ 20 A	30	100 @ 200 V	175	TO-263-3, D2PAK	Tube
SBR20A200CTB-13	Diodes Incorporated	200	10	0.96 @ 20 A	30	100 @ 200 V	175	TO-263-3, D2PAK	Tape & Reel (TR)
SBR40U200CTB	Diodes Incorporated	200	20	0.93 @ 20 A	50	200 @ 200 V	175	TO-263-3, D2PAK	Tube
SBR40U200CTB-13	Diodes Incorporated	200	20	0.93 @ 20 A	50	200 @ 200 V	175	TO-263-3, D2PAK	Tape & Reel (TR)
STTH1002CG-TR	STMicroelectronics	200	8	1.1 @ 5 A	25	5 @ 200 V	175	TO-263-3, D2PAK	Tape & Reel (TR)
STTH1602CG-TR	STMicroelectronics	200	10	1.1 @ 8 A	26	6 @ 200 V	175	TO-263-3, D2PAK	Cut Tape (CT) & Digi-Reel®
STTH2002CG-TR	STMicroelectronics	200	15	1.1 @ 10 A	27	10 @ 200 V	175	TO-263-3, D2PAK	Cut Tape (CT) & Digi-Reel®

Engineering Selection Recommendations

Direct Equivalent (Identical Current Rating):

STTH2002CG-TR from STMicroelectronics provides identical 15 A current rating with matching 200 V reverse voltage specification. This part maintains full electrical compatibility with the DPG30C200PC-TRL while offering improved reverse recovery time (27 ns versus 35 ns) and lower reverse leakage current (10 µA versus 1 µA). Both parts are ROHS3 compliant and rated to 175°C junction temperature. The STTH2002CG-TR is available in Cut Tape & Digi-Reel® packaging.

Higher Current Rating Substitutes (Design Margin Enhancement):

SBR40U200CTB-13 and SBR40U200CTB from Diodes Incorporated provide 20 A current rating in the same TO-263-3 D2PAK package. These parts support higher current applications while maintaining 200 V reverse voltage specification. Both are ROHS3 compliant with -65°C to 175°C operating range. The -13 variant is supplied in Tape & Reel packaging; the standard variant is supplied in Tube packaging.

Lower Current Rating Substitutes (Cost Optimization):

SBR10200CTB-13-G and SBR10200CTB from Diodes Incorporated provide 5 A current rating. These parts are suitable for applications with reduced current requirements and offer lower forward voltage (0.92 V) and faster reverse recovery time (20 ns). Both are ROHS3 compliant with -65°C to 175°C operating range. The -13-G variant is supplied in Tape & Reel packaging; the standard variant is supplied in Tube packaging.

Mid-Range Current Rating Substitutes:

FFB20UP20DN-F085 from onsemi and SBR20A200CTB-13 from Diodes Incorporated both provide 10 A current rating. FFB20UP20DN-F085 includes AEC-Q101 automotive qualification. SBR20A200CTB-13 is supplied in Tape & Reel packaging. Both maintain 200 V reverse voltage and ROHS3 compliance.

STTH1602CG-TR from STMicroelectronics provides 10 A current rating with improved reverse recovery time (26 ns) and is available in Cut Tape & Digi-Reel® packaging.

All substitute parts maintain the same diode configuration (1 Pair Common Cathode), package form factor (TO-263-3 D2PAK), surface mount technology, and fast recovery speed classification as the primary part.

Frequently Asked Questions (FAQ)

Q: Can I substitute a lower current-rated part for the DPG30C200PC-TRL?

A: Lower current-rated substitutes are not recommended for direct replacement in applications requiring the full 15 A specification. However, if your circuit design operates at reduced current levels, parts such as SBR10200CTB-13-G (5 A) or STTH1602CG-TR (10 A) may be evaluated based on actual application requirements. Verify that the lower current rating does not create thermal or performance limitations in your specific circuit.

Q: What is the difference between Tape & Reel and Tube packaging?

A: Tape & Reel (TR) packaging is supplied on continuous carrier tape suitable for automated pick-and-place assembly equipment. Tube packaging contains loose components in a plastic tube and is typically used for manual assembly or lower-volume applications. Both packaging types contain identical components; the difference is in handling and assembly methodology.

Q: Is STTH2002CG-TR a direct replacement for DPG30C200PC-TRL?

A: STTH2002CG-TR provides identical 15 A current rating and 200 V reverse voltage specification in the same TO-263-3 D2PAK package. Both parts are ROHS3 compliant and rated to 175°C junction temperature. The STTH2002CG-TR offers improved reverse recovery time (27 ns versus 35 ns). This part is functionally compatible for direct substitution in applications where the specified electrical parameters are met.

Q: Why do some substitute parts have higher reverse leakage current?

A: Reverse leakage current varies based on semiconductor technology and manufacturing process. Parts with higher leakage current (such as SBR40U200CTB at 200 µA) remain acceptable for standard rectification applications where leakage current does not create circuit performance issues. Applications sensitive to leakage current should select parts with lower specified values, such as STTH2002CG-TR (10 µA) or SBR10200CTB-13-G (5 µA).

Q: Can I use SBR40U200CTB-13 in place of DPG30C200PC-TRL?

A: SBR40U200CTB-13 provides 20 A current rating compared to the 15 A specification of DPG30C200PC-TRL. Both parts maintain 200 V reverse voltage, TO-263-3 D2PAK package, and ROHS3 compliance. The higher current rating provides design margin and is functionally compatible. However, verify that the higher reverse leakage current (200 µA versus 1 µA) does not impact circuit performance in your specific application.

Q: What is the significance of the "-13" suffix in part numbers?

A: The "-13" suffix indicates Tape & Reel packaging format. Parts without this suffix are typically supplied in Tube packaging. The electrical specifications and component performance are identical between these variants; only the packaging and delivery format differ.

Q: Are all substitute parts ROHS3 compliant?

A: All substitute parts listed in this reference are ROHS3 compliant, matching the compliance status of the DPG30C200PC-TRL. This ensures compatibility with environmental and regulatory requirements across all listed alternatives.

Q: What does "1 Pair Common Cathode" configuration mean?

A: This diode configuration contains two diodes with a shared cathode terminal. The common cathode connection is brought to the tab of the TO-263-3 D2PAK package. All substitute parts maintain this identical configuration, ensuring pin-for-pin compatibility in circuit applications.

Q: How do I select between STMicroelectronics and Diodes Incorporated substitutes?

A: Both manufacturers provide equivalent parts meeting the specified electrical parameters. Selection may be based on supplier availability, inventory levels, packaging preference (Tape & Reel versus Tube), or specific performance characteristics such as reverse recovery time or forward voltage. Verify that your procurement and supply chain processes support the selected manufacturer.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message