DPFF16D22J-F Film Capacitor Equivalent & Substitute Parts

Part Overview

The DPFF16D22J-F is a 2200 pF film capacitor manufactured by Cornell Dubilier Electronics (CDE), rated for 1600V DC operation with polypropylene metallized dielectric. This radial through-hole component is designed for high pulse and DV/DT applications requiring stable capacitance across a wide operating temperature range of -55°C to 105°C. The part maintains Active product status with full RoHS3 compliance and REACH unaffected designation. Equivalent and substitute parts are identified based on matching electrical specifications, mechanical compatibility, and environmental ratings to ensure functional interchangeability in circuit applications.

Substiute Parts

DPFF16D22J-F

Cornell Dubilier Electronics (CDE)In Stock: 1084DPFF16D22J-F Datasheet

Current PartRFQ

715P222516LD3

Cornell Dubilier Electronics (CDE)In Stock: 5349715P222516LD3 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the DPFF16D22J-F are identified through strict alignment of the following critical parameters:

Electrical Equivalence Requirements:

• Capacitance value: 2200 pF (exact match)
• Tolerance: ±5% (matching specification)
• DC voltage rating: 1600V minimum (equal or higher acceptable)
• AC voltage rating: 500V minimum (equal or higher acceptable)
• Dielectric material: Polypropylene (PP), Metallized (same material system)

Mechanical Compatibility Requirements:

• Mounting type: Through Hole (same assembly method)
• Package type: Radial (same physical form)
• Lead spacing: 0.720" (18.30mm) (exact match for PCB fit)
• Termination: PC Pins (same solder connection)

Compliance & Environmental Requirements:

• RoHS3 Compliant status (regulatory alignment)
• Operating temperature range: Must support application requirements
• Product status: Active (current availability)

The substitute part 715P222516LD3 meets all electrical and mechanical equivalence criteria, with identical capacitance, tolerance, voltage ratings, dielectric material, lead spacing, and termination type. Both parts are manufactured by Cornell Dubilier Electronics and maintain Active product status with full RoHS3 compliance.

Parameter Comparison

Engineering Selection Recommendations

Primary Selection (DPFF16D22J-F): The DPFF16D22J-F is the specified component for applications requiring the full operating temperature range of -55°C to 105°C. This part is recommended when maximum thermal performance and the complete temperature envelope are design requirements. Both parts maintain identical electrical specifications and RoHS3 compliance.

Substitute Selection (715P222516LD3): The 715P222516LD3 (Orange Drop® 715P series) is electrically equivalent and mechanically compatible for applications where the operating temperature range of -55°C to 85°C is acceptable. This substitute provides identical electrical performance with matching lead spacing for direct PCB compatibility. Physical dimensions differ; the substitute has a smaller diameter but greater seated height. Verify available board space before substitution, particularly in height-constrained layouts.

Compliance Basis: Both parts are Active products manufactured by Cornell Dubilier Electronics with full RoHS3 compliance and REACH unaffected status. Selection between these parts should be based on application temperature requirements and available PCB mounting space.

Frequently Asked Questions (FAQ)

Q: Can the 715P222516LD3 be used as a direct replacement for the DPFF16D22J-F?

A: The 715P222516LD3 is electrically equivalent with identical capacitance (2200 pF), tolerance (±5%), voltage ratings (1600V DC / 500V AC), and lead spacing (0.720"). However, the operating temperature range differs: the substitute supports -55°C to 85°C versus the main part's -55°C to 105°C. Substitution is valid only if your application does not require operation above 85°C. Physical dimensions also differ; verify available PCB space, particularly the seated height of 0.642" for the substitute versus 0.500" for the main part.

Q: Are the lead spacings identical between these parts?

A: Yes. Both the DPFF16D22J-F and 715P222516LD3 have identical lead spacing of 0.720" (18.30mm), ensuring PCB hole pattern compatibility without modification.

Q: What is the key difference between these two capacitors?

A: The primary differences are operating temperature range and physical dimensions. The DPFF16D22J-F operates from -55°C to 105°C with dimensions of 1.299" L x 0.500" W and 0.500" seated height. The 715P222516LD3 operates from -55°C to 85°C with dimensions of 0.350" Dia x 1.252" L and 0.642" seated height. All electrical specifications are identical.

Q: Do both parts meet RoHS3 compliance?

A: Yes. Both the DPFF16D22J-F and 715P222516LD3 are RoHS3 compliant and REACH unaffected, meeting current regulatory requirements.

Q: Which part should I select for high-temperature applications?

A: The DPFF16D22J-F is required for applications requiring operation above 85°C, as it supports the full -55°C to 105°C temperature range. The 715P222516LD3 is limited to -55°C to 85°C maximum.

Q: Are these parts suitable for high pulse and DV/DT applications?

A: Yes. Both parts are rated for high pulse and DV/DT applications as specified in the DPFF16D22J-F datasheet. The 715P222516LD3 additionally supports audio and high frequency switching applications.